From: Brian Foster <bfoster@redhat.com>
To: fstests@vger.kernel.org
Cc: linux-xfs@vger.kernel.org, djwong@kernel.org,
josef@toxicpanda.com, david@fromorbit.com
Subject: [PATCH 1/3] fsx: factor out a file size update helper
Date: Thu, 22 Aug 2024 10:44:20 -0400 [thread overview]
Message-ID: <20240822144422.188462-2-bfoster@redhat.com> (raw)
In-Reply-To: <20240822144422.188462-1-bfoster@redhat.com>
In preparation for support for eof page pollution, factor out a file
size update helper. This updates the internally tracked file size
based on the upcoming operation and zeroes the appropriate range in
the good buffer for extending operations.
Note that a handful of callers currently make these updates after
performing the associated operation. Order is not important to
current behavior, but it will be for a follow on patch, so make
those calls a bit earlier as well.
Signed-off-by: Brian Foster <bfoster@redhat.com>
---
ltp/fsx.c | 57 +++++++++++++++++++++++++------------------------------
1 file changed, 26 insertions(+), 31 deletions(-)
diff --git a/ltp/fsx.c b/ltp/fsx.c
index 2dc59b06..1389c51d 100644
--- a/ltp/fsx.c
+++ b/ltp/fsx.c
@@ -983,6 +983,17 @@ gendata(char *original_buf, char *good_buf, unsigned offset, unsigned size)
}
}
+/*
+ * Helper to update the tracked file size. If the offset begins beyond current
+ * EOF, zero the range from EOF to offset in the good buffer.
+ */
+void
+update_file_size(unsigned offset, unsigned size)
+{
+ if (offset > file_size)
+ memset(good_buf + file_size, '\0', offset - file_size);
+ file_size = offset + size;
+}
void
dowrite(unsigned offset, unsigned size)
@@ -1003,10 +1014,8 @@ dowrite(unsigned offset, unsigned size)
log4(OP_WRITE, offset, size, FL_NONE);
gendata(original_buf, good_buf, offset, size);
- if (file_size < offset + size) {
- if (file_size < offset)
- memset(good_buf + file_size, '\0', offset - file_size);
- file_size = offset + size;
+ if (offset + size > file_size) {
+ update_file_size(offset, size);
if (lite) {
warn("Lite file size bug in fsx!");
report_failure(149);
@@ -1070,10 +1079,8 @@ domapwrite(unsigned offset, unsigned size)
log4(OP_MAPWRITE, offset, size, FL_NONE);
gendata(original_buf, good_buf, offset, size);
- if (file_size < offset + size) {
- if (file_size < offset)
- memset(good_buf + file_size, '\0', offset - file_size);
- file_size = offset + size;
+ if (offset + size > file_size) {
+ update_file_size(offset, size);
if (lite) {
warn("Lite file size bug in fsx!");
report_failure(200);
@@ -1136,9 +1143,7 @@ dotruncate(unsigned size)
log4(OP_TRUNCATE, 0, size, FL_NONE);
- if (size > file_size)
- memset(good_buf + file_size, '\0', size - file_size);
- file_size = size;
+ update_file_size(size, 0);
if (testcalls <= simulatedopcount)
return;
@@ -1247,6 +1252,9 @@ do_zero_range(unsigned offset, unsigned length, int keep_size)
log4(OP_ZERO_RANGE, offset, length,
keep_size ? FL_KEEP_SIZE : FL_NONE);
+ if (end_offset > file_size)
+ update_file_size(offset, length);
+
if (testcalls <= simulatedopcount)
return;
@@ -1263,17 +1271,6 @@ do_zero_range(unsigned offset, unsigned length, int keep_size)
}
memset(good_buf + offset, '\0', length);
-
- if (!keep_size && end_offset > file_size) {
- /*
- * If there's a gap between the old file size and the offset of
- * the zero range operation, fill the gap with zeroes.
- */
- if (offset > file_size)
- memset(good_buf + file_size, '\0', offset - file_size);
-
- file_size = end_offset;
- }
}
#else
@@ -1538,6 +1535,9 @@ do_clone_range(unsigned offset, unsigned length, unsigned dest)
log5(OP_CLONE_RANGE, offset, length, dest, FL_NONE);
+ if (dest + length > file_size)
+ update_file_size(dest, length);
+
if (testcalls <= simulatedopcount)
return;
@@ -1556,10 +1556,6 @@ do_clone_range(unsigned offset, unsigned length, unsigned dest)
}
memcpy(good_buf + dest, good_buf + offset, length);
- if (dest > file_size)
- memset(good_buf + file_size, '\0', dest - file_size);
- if (dest + length > file_size)
- file_size = dest + length;
}
#else
@@ -1756,6 +1752,9 @@ do_copy_range(unsigned offset, unsigned length, unsigned dest)
log5(OP_COPY_RANGE, offset, length, dest, FL_NONE);
+ if (dest + length > file_size)
+ update_file_size(dest, length);
+
if (testcalls <= simulatedopcount)
return;
@@ -1792,10 +1791,6 @@ do_copy_range(unsigned offset, unsigned length, unsigned dest)
}
memcpy(good_buf + dest, good_buf + offset, length);
- if (dest > file_size)
- memset(good_buf + file_size, '\0', dest - file_size);
- if (dest + length > file_size)
- file_size = dest + length;
}
#else
@@ -1846,7 +1841,7 @@ do_preallocate(unsigned offset, unsigned length, int keep_size)
if (end_offset > file_size) {
memset(good_buf + file_size, '\0', end_offset - file_size);
- file_size = end_offset;
+ update_file_size(offset, length);
}
if (testcalls <= simulatedopcount)
--
2.45.0
next prev parent reply other threads:[~2024-08-22 14:43 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-22 14:44 [PATCH 0/3] fstests/fsx: test coverage for eof zeroing Brian Foster
2024-08-22 14:44 ` Brian Foster [this message]
2024-08-22 20:50 ` [PATCH 1/3] fsx: factor out a file size update helper Darrick J. Wong
2024-08-26 14:03 ` Brian Foster
2024-08-26 17:10 ` Brian Foster
2024-08-22 14:44 ` [PATCH 2/3] fsx: support eof page pollution for eof zeroing test coverage Brian Foster
2024-08-22 20:52 ` Darrick J. Wong
2024-08-26 14:04 ` Brian Foster
2024-08-22 14:44 ` [PATCH 3/3] generic: test to run fsx eof pollution Brian Foster
2024-08-22 20:54 ` Darrick J. Wong
2024-08-26 14:07 ` Brian Foster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240822144422.188462-2-bfoster@redhat.com \
--to=bfoster@redhat.com \
--cc=david@fromorbit.com \
--cc=djwong@kernel.org \
--cc=fstests@vger.kernel.org \
--cc=josef@toxicpanda.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.