From: Andrii Nakryiko <andrii@kernel.org>
To: bpf@vger.kernel.org
Cc: linux-mm@kvack.org, akpm@linux-foundation.org,
adobriyan@gmail.com, shakeel.butt@linux.dev, hannes@cmpxchg.org,
ak@linux.intel.com, osandov@osandov.com, song@kernel.org,
jannh@google.com, linux-fsdevel@vger.kernel.org,
willy@infradead.org, Andrii Nakryiko <andrii@kernel.org>,
stable@vger.kernel.org, Eduard Zingerman <eddyz87@gmail.com>
Subject: [PATCH v7 bpf-next 01/10] lib/buildid: harden build ID parsing logic
Date: Thu, 29 Aug 2024 10:42:23 -0700 [thread overview]
Message-ID: <20240829174232.3133883-2-andrii@kernel.org> (raw)
In-Reply-To: <20240829174232.3133883-1-andrii@kernel.org>
Harden build ID parsing logic, adding explicit READ_ONCE() where it's
important to have a consistent value read and validated just once.
Also, as pointed out by Andi Kleen, we need to make sure that entire ELF
note is within a page bounds, so move the overflow check up and add an
extra note_size boundaries validation.
Fixes tag below points to the code that moved this code into
lib/buildid.c, and then subsequently was used in perf subsystem, making
this code exposed to perf_event_open() users in v5.12+.
Cc: stable@vger.kernel.org
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Fixes: bd7525dacd7e ("bpf: Move stack_map_get_build_id into lib")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
---
lib/buildid.c | 76 +++++++++++++++++++++++++++++----------------------
1 file changed, 44 insertions(+), 32 deletions(-)
diff --git a/lib/buildid.c b/lib/buildid.c
index e02b5507418b..26007cc99a38 100644
--- a/lib/buildid.c
+++ b/lib/buildid.c
@@ -18,31 +18,37 @@ static int parse_build_id_buf(unsigned char *build_id,
const void *note_start,
Elf32_Word note_size)
{
- Elf32_Word note_offs = 0, new_offs;
-
- while (note_offs + sizeof(Elf32_Nhdr) < note_size) {
- Elf32_Nhdr *nhdr = (Elf32_Nhdr *)(note_start + note_offs);
+ const char note_name[] = "GNU";
+ const size_t note_name_sz = sizeof(note_name);
+ u64 note_off = 0, new_off, name_sz, desc_sz;
+ const char *data;
+
+ while (note_off + sizeof(Elf32_Nhdr) < note_size &&
+ note_off + sizeof(Elf32_Nhdr) > note_off /* overflow */) {
+ Elf32_Nhdr *nhdr = (Elf32_Nhdr *)(note_start + note_off);
+
+ name_sz = READ_ONCE(nhdr->n_namesz);
+ desc_sz = READ_ONCE(nhdr->n_descsz);
+
+ new_off = note_off + sizeof(Elf32_Nhdr);
+ if (check_add_overflow(new_off, ALIGN(name_sz, 4), &new_off) ||
+ check_add_overflow(new_off, ALIGN(desc_sz, 4), &new_off) ||
+ new_off > note_size)
+ break;
if (nhdr->n_type == BUILD_ID &&
- nhdr->n_namesz == sizeof("GNU") &&
- !strcmp((char *)(nhdr + 1), "GNU") &&
- nhdr->n_descsz > 0 &&
- nhdr->n_descsz <= BUILD_ID_SIZE_MAX) {
- memcpy(build_id,
- note_start + note_offs +
- ALIGN(sizeof("GNU"), 4) + sizeof(Elf32_Nhdr),
- nhdr->n_descsz);
- memset(build_id + nhdr->n_descsz, 0,
- BUILD_ID_SIZE_MAX - nhdr->n_descsz);
+ name_sz == note_name_sz &&
+ memcmp(nhdr + 1, note_name, note_name_sz) == 0 &&
+ desc_sz > 0 && desc_sz <= BUILD_ID_SIZE_MAX) {
+ data = note_start + note_off + ALIGN(note_name_sz, 4);
+ memcpy(build_id, data, desc_sz);
+ memset(build_id + desc_sz, 0, BUILD_ID_SIZE_MAX - desc_sz);
if (size)
- *size = nhdr->n_descsz;
+ *size = desc_sz;
return 0;
}
- new_offs = note_offs + sizeof(Elf32_Nhdr) +
- ALIGN(nhdr->n_namesz, 4) + ALIGN(nhdr->n_descsz, 4);
- if (new_offs <= note_offs) /* overflow */
- break;
- note_offs = new_offs;
+
+ note_off = new_off;
}
return -EINVAL;
@@ -71,7 +77,7 @@ static int get_build_id_32(const void *page_addr, unsigned char *build_id,
{
Elf32_Ehdr *ehdr = (Elf32_Ehdr *)page_addr;
Elf32_Phdr *phdr;
- int i;
+ __u32 i, phnum;
/*
* FIXME
@@ -80,18 +86,19 @@ static int get_build_id_32(const void *page_addr, unsigned char *build_id,
*/
if (ehdr->e_phoff != sizeof(Elf32_Ehdr))
return -EINVAL;
+
+ phnum = READ_ONCE(ehdr->e_phnum);
/* only supports phdr that fits in one page */
- if (ehdr->e_phnum >
- (PAGE_SIZE - sizeof(Elf32_Ehdr)) / sizeof(Elf32_Phdr))
+ if (phnum > (PAGE_SIZE - sizeof(Elf32_Ehdr)) / sizeof(Elf32_Phdr))
return -EINVAL;
phdr = (Elf32_Phdr *)(page_addr + sizeof(Elf32_Ehdr));
- for (i = 0; i < ehdr->e_phnum; ++i) {
+ for (i = 0; i < phnum; ++i) {
if (phdr[i].p_type == PT_NOTE &&
!parse_build_id(page_addr, build_id, size,
- page_addr + phdr[i].p_offset,
- phdr[i].p_filesz))
+ page_addr + READ_ONCE(phdr[i].p_offset),
+ READ_ONCE(phdr[i].p_filesz)))
return 0;
}
return -EINVAL;
@@ -103,7 +110,7 @@ static int get_build_id_64(const void *page_addr, unsigned char *build_id,
{
Elf64_Ehdr *ehdr = (Elf64_Ehdr *)page_addr;
Elf64_Phdr *phdr;
- int i;
+ __u32 i, phnum;
/*
* FIXME
@@ -112,18 +119,19 @@ static int get_build_id_64(const void *page_addr, unsigned char *build_id,
*/
if (ehdr->e_phoff != sizeof(Elf64_Ehdr))
return -EINVAL;
+
+ phnum = READ_ONCE(ehdr->e_phnum);
/* only supports phdr that fits in one page */
- if (ehdr->e_phnum >
- (PAGE_SIZE - sizeof(Elf64_Ehdr)) / sizeof(Elf64_Phdr))
+ if (phnum > (PAGE_SIZE - sizeof(Elf64_Ehdr)) / sizeof(Elf64_Phdr))
return -EINVAL;
phdr = (Elf64_Phdr *)(page_addr + sizeof(Elf64_Ehdr));
- for (i = 0; i < ehdr->e_phnum; ++i) {
+ for (i = 0; i < phnum; ++i) {
if (phdr[i].p_type == PT_NOTE &&
!parse_build_id(page_addr, build_id, size,
- page_addr + phdr[i].p_offset,
- phdr[i].p_filesz))
+ page_addr + READ_ONCE(phdr[i].p_offset),
+ READ_ONCE(phdr[i].p_filesz)))
return 0;
}
return -EINVAL;
@@ -152,6 +160,10 @@ int build_id_parse(struct vm_area_struct *vma, unsigned char *build_id,
page = find_get_page(vma->vm_file->f_mapping, 0);
if (!page)
return -EFAULT; /* page not mapped */
+ if (!PageUptodate(page)) {
+ put_page(page);
+ return -EFAULT;
+ }
ret = -EINVAL;
page_addr = kmap_local_page(page);
--
2.43.5
next prev parent reply other threads:[~2024-08-29 17:42 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-29 17:42 [PATCH v7 bpf-next 00/10] Harden and extend ELF build ID parsing logic Andrii Nakryiko
2024-08-29 17:42 ` Andrii Nakryiko [this message]
2024-11-01 13:54 ` [PATCH v7 bpf-next 01/10] lib/buildid: harden " Jiri Olsa
2024-11-01 18:12 ` Andrii Nakryiko
2024-08-29 17:42 ` [PATCH v7 bpf-next 02/10] lib/buildid: add single folio-based file reader abstraction Andrii Nakryiko
2024-08-29 17:42 ` [PATCH v7 bpf-next 03/10] lib/buildid: take into account e_phoff when fetching program headers Andrii Nakryiko
2024-08-29 17:42 ` [PATCH v7 bpf-next 04/10] lib/buildid: remove single-page limit for PHDR search Andrii Nakryiko
2024-08-29 17:42 ` [PATCH v7 bpf-next 05/10] lib/buildid: rename build_id_parse() into build_id_parse_nofault() Andrii Nakryiko
2024-10-14 2:50 ` Lai, Yi
2024-10-14 23:41 ` Andrii Nakryiko
2024-08-29 17:42 ` [PATCH v7 bpf-next 06/10] lib/buildid: implement sleepable build_id_parse() API Andrii Nakryiko
2024-08-29 17:42 ` [PATCH v7 bpf-next 07/10] lib/buildid: don't limit .note.gnu.build-id to the first page in ELF Andrii Nakryiko
2024-08-29 17:42 ` [PATCH v7 bpf-next 08/10] bpf: decouple stack_map_get_build_id_offset() from perf_callchain_entry Andrii Nakryiko
2024-08-29 17:42 ` [PATCH v7 bpf-next 09/10] bpf: wire up sleepable bpf_get_stack() and bpf_get_task_stack() helpers Andrii Nakryiko
2024-11-11 5:51 ` Sergey Senozhatsky
2024-11-11 17:49 ` Andrii Nakryiko
2024-11-12 1:29 ` Sergey Senozhatsky
2024-11-13 20:40 ` Andrii Nakryiko
2024-08-29 17:42 ` [PATCH v7 bpf-next 10/10] selftests/bpf: add build ID tests Andrii Nakryiko
2024-09-03 22:38 ` [PATCH v7 bpf-next 00/10] Harden and extend ELF build ID parsing logic Andrii Nakryiko
2024-09-11 0:27 ` Alexei Starovoitov
2024-09-11 17:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240829174232.3133883-2-andrii@kernel.org \
--to=andrii@kernel.org \
--cc=adobriyan@gmail.com \
--cc=ak@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=bpf@vger.kernel.org \
--cc=eddyz87@gmail.com \
--cc=hannes@cmpxchg.org \
--cc=jannh@google.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=osandov@osandov.com \
--cc=shakeel.butt@linux.dev \
--cc=song@kernel.org \
--cc=stable@vger.kernel.org \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.