From: Stefan Eichenberger <eichest@gmail.com>
To: o.rempel@pengutronix.de, kernel@pengutronix.de,
andi.shyti@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, festevam@gmail.com,
francesco.dolcini@toradex.com, Frank.Li@nxp.com
Cc: linux-i2c@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Stefan Eichenberger <stefan.eichenberger@toradex.com>
Subject: [PATCH v3 2/4] i2c: imx: separate atomic, dma and non-dma use case
Date: Mon, 2 Sep 2024 09:42:02 +0200 [thread overview]
Message-ID: <20240902074330.6349-3-eichest@gmail.com> (raw)
In-Reply-To: <20240902074330.6349-1-eichest@gmail.com>
From: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Separate the atomic, dma and non-dma use case as a preparation step for
moving the non-dma use case to the isr to avoid rescheduling while a
transfer is in progress.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/i2c/busses/i2c-imx.c | 107 +++++++++++++++++++++++------------
1 file changed, 70 insertions(+), 37 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 1add946e3bc20..2e86d363e186d 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1011,6 +1011,43 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
return i2c_imx_acked(i2c_imx);
}
+static int i2c_imx_prepare_read(struct imx_i2c_struct *i2c_imx,
+ struct i2c_msg *msgs, bool atomic,
+ bool use_dma)
+{
+ int result;
+ unsigned int temp = 0;
+
+ /* write slave address */
+ imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx, atomic);
+ if (result)
+ return result;
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
+
+ /* setup bus to read data */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_MTX;
+
+ /*
+ * Reset the I2CR_TXAK flag initially for SMBus block read since the
+ * length is unknown
+ */
+ if (msgs->len - 1)
+ temp &= ~I2CR_TXAK;
+ if (use_dma)
+ temp |= I2CR_DMAEN;
+
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
+
+ return 0;
+}
+
static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
struct i2c_msg *msgs, bool is_lastmsg)
{
@@ -1021,6 +1058,11 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
struct imx_i2c_dma *dma = i2c_imx->dma;
struct device *dev = &i2c_imx->adapter.dev;
+ result = i2c_imx_prepare_read(i2c_imx, msgs, false, true);
+ if (result)
+ return result;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
dma->chan_using = dma->chan_rx;
dma->dma_transfer_dir = DMA_DEV_TO_MEM;
@@ -1131,50 +1173,24 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
return 0;
}
+static int i2c_imx_atomic_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+{
+ return i2c_imx_write(i2c_imx, msgs, true);
+}
+
static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
bool is_lastmsg, bool atomic)
{
int i, result;
unsigned int temp;
int block_data = msgs->flags & I2C_M_RECV_LEN;
- int use_dma = i2c_imx->dma && msgs->flags & I2C_M_DMA_SAFE &&
- msgs->len >= DMA_THRESHOLD && !block_data;
- dev_dbg(&i2c_imx->adapter.dev,
- "<%s> write slave address: addr=0x%x\n",
- __func__, i2c_8bit_addr_from_msg(msgs));
-
- /* write slave address */
- imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
- result = i2c_imx_trx_complete(i2c_imx, atomic);
+ result = i2c_imx_prepare_read(i2c_imx, msgs, atomic, false);
if (result)
return result;
- result = i2c_imx_acked(i2c_imx);
- if (result)
- return result;
-
- dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
-
- /* setup bus to read data */
- temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
- temp &= ~I2CR_MTX;
-
- /*
- * Reset the I2CR_TXAK flag initially for SMBus block read since the
- * length is unknown
- */
- if ((msgs->len - 1) || block_data)
- temp &= ~I2CR_TXAK;
- if (use_dma)
- temp |= I2CR_DMAEN;
- imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
- imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
- if (use_dma)
- return i2c_imx_dma_read(i2c_imx, msgs, is_lastmsg);
-
/* read data */
for (i = 0; i < msgs->len; i++) {
u8 len = 0;
@@ -1241,6 +1257,12 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
return 0;
}
+static int i2c_imx_atomic_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
+ bool is_lastmsg)
+{
+ return i2c_imx_read(i2c_imx, msgs, is_lastmsg, true);
+}
+
static int i2c_imx_xfer_common(struct i2c_adapter *adapter,
struct i2c_msg *msgs, int num, bool atomic)
{
@@ -1248,6 +1270,7 @@ static int i2c_imx_xfer_common(struct i2c_adapter *adapter,
int result;
bool is_lastmsg = false;
struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
+ int use_dma = 0;
/* Start I2C transfer */
result = i2c_imx_start(i2c_imx, atomic);
@@ -1300,15 +1323,25 @@ static int i2c_imx_xfer_common(struct i2c_adapter *adapter,
(temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0),
(temp & I2SR_RXAK ? 1 : 0));
#endif
+
+ use_dma = i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD &&
+ msgs[i].flags & I2C_M_DMA_SAFE;
if (msgs[i].flags & I2C_M_RD) {
- result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg, atomic);
+ int block_data = msgs->flags & I2C_M_RECV_LEN;
+
+ if (atomic)
+ result = i2c_imx_atomic_read(i2c_imx, &msgs[i], is_lastmsg);
+ else if (use_dma && !block_data)
+ result = i2c_imx_dma_read(i2c_imx, &msgs[i], is_lastmsg);
+ else
+ result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg, false);
} else {
- if (!atomic &&
- i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD &&
- msgs[i].flags & I2C_M_DMA_SAFE)
+ if (atomic)
+ result = i2c_imx_atomic_write(i2c_imx, &msgs[i]);
+ else if (use_dma)
result = i2c_imx_dma_write(i2c_imx, &msgs[i]);
else
- result = i2c_imx_write(i2c_imx, &msgs[i], atomic);
+ result = i2c_imx_write(i2c_imx, &msgs[i], false);
}
if (result)
goto fail0;
--
2.43.0
next prev parent reply other threads:[~2024-09-02 7:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-02 7:42 [PATCH v3 0/4] i2c: imx: prevent rescheduling in non-dma mode Stefan Eichenberger
2024-09-02 7:42 ` [PATCH v3 1/4] i2c: imx: only poll for bus busy in multi master mode Stefan Eichenberger
2024-09-02 7:42 ` Stefan Eichenberger [this message]
2024-09-02 7:42 ` [PATCH v3 3/4] i2c: imx: use readb_relaxed and writeb_relaxed Stefan Eichenberger
2024-09-02 7:42 ` [PATCH v3 4/4] i2c: imx: prevent rescheduling in non dma mode Stefan Eichenberger
2024-09-03 21:00 ` Andi Shyti
[not found] ` <CAD4aGmRuy_a4K5ENv7m8V1NO5U2Xa06EkWReHqJbHtMoTGRF6Q@mail.gmail.com>
2024-09-09 21:57 ` Andi Shyti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240902074330.6349-3-eichest@gmail.com \
--to=eichest@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=andi.shyti@kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan.eichenberger@toradex.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.