[PATCH v5 0/7] pressure: bmp280: Minor cleanup and interrupt support

[Vasileios Amoiridis <vassilisamir@gmail.com>]

Depends on this: https://lore.kernel.org/linux-iio/20240823172017.9028-1-vassilisamir@gmail.com

Changes in v5:

[PATCH v5 1/7]:
	- Use local variable instead of direct assignment to improve
	  readability

[PATCH v5 2/7]:
	- Use local variable instead of direct assignment to improve
	  readability

[PATCH v5 4/7]:
	- Improve commit message
	- Use unit suffix in time variables
	- Use local variable instead of direct assignment to improve
	  readability
	- Use 8 elements per line in the const int array

[PATCH v5 5/7]:
	- Use not in the allOf:int: to reduce if cases
	- Use type:boolean

[PATCH v5 6/7]:
	- Use local variable instead of direct assignment to improve
	  readability
	- Use irq_get_trigger_type()
	- Make return paths consistent

[PATCH v5 7/7]:
	- Use local variable instead of direct assignment to improve
	  readbility

---
v4: https://lore.kernel.org/linux-iio/20240828205128.92145-1-vassilisamir@gmail.com
v3: https://lore.kernel.org/linux-iio/20240823181714.64545-1-vassilisamir@gmail.com
v2: https://lore.kernel.org/linux-iio/20240725231039.614536-1-vassilisamir@gmail.com
v1: https://lore.kernel.org/linux-iio/20240711211558.106327-1-vassilisamir@gmail.com

Vasileios Amoiridis (7):
  iio: pressure: bmp280: Use bulk read for humidity calibration data
  iio: pressure: bmp280: Add support for bmp280 soft reset
  iio: pressure: bmp280: Remove config error check for IIR filter
    updates
  iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and
    BMP5xx devices
  iio: pressure: bmp280: Add data ready trigger support
  iio: pressure: bmp280: Move bmp085 interrupt to new configuration

 .../bindings/iio/pressure/bmp085.yaml         |  22 +-
 drivers/iio/pressure/bmp280-core.c            | 682 +++++++++++++++---
 drivers/iio/pressure/bmp280-i2c.c             |   4 +-
 drivers/iio/pressure/bmp280-spi.c             |   4 +-
 drivers/iio/pressure/bmp280.h                 |  52 ++
 5 files changed, 675 insertions(+), 89 deletions(-)


base-commit: 0f718e10da81446df0909c9939dff2b77e3b4e95
prerequisite-patch-id: e4f81f31f4fbb2aa872c0c74ed4511893eee0c9a
-- 
2.25.1