From: Frank Li <Frank.Li@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list),
imx@lists.linux.dev (open list:ARM/FREESCALE IMX / MXC ARM
ARCHITECTURE)
Cc: imx@lists.linux.dev
Subject: [PATCH v3 1/1] arm64: dts: imx: rename gpio hog as <gpio name>-hog
Date: Mon, 2 Sep 2024 15:30:12 -0400 [thread overview]
Message-ID: <20240902193013.1456513-1-Frank.Li@nxp.com> (raw)
Rename admin_led_lower to admin-led-lower-hog.
Rename gpio rs485_en as rs485-en-hog.
Rename gpio uart4_rs485_en to uart4-rs485-en-hog.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: gpio@76:
'admin_led_lower' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtb:
gpio@30230000: 'rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb:
gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v2 to v3
-rebase to guoshawn/imx/dt64
---
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 2 +-
.../dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso | 2 +-
.../dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso | 2 +-
.../boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso | 2 +-
.../boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso | 4 ++--
.../boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso | 4 ++--
.../boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso | 2 +-
.../boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso | 4 ++--
.../boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso | 4 ++--
9 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index bea9e8bcafc47..bc0d89427fbe5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -220,7 +220,7 @@ sfpgpio: gpio@76 {
#gpio-cells = <2>;
gpio-controller;
- admin_led_lower {
+ admin-led-lower-hog {
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
index 9dd0703423635..4de22d2044d69 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
@@ -18,7 +18,7 @@ &gpio3 {
pinctrl-names = "default";
pinctrcl-0 = <&pinctrl_gpio3_hog>;
- uart4_rs485_en {
+ uart4-rs485-en-hog {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
index 045cd8082781c..e259d8d5d9e39 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
@@ -19,7 +19,7 @@ &gpio3 {
pinctrl-names = "default";
pinctrcl-0 = <&pinctrl_gpio3_hog>;
- uart4_rs485_en {
+ uart4-rs485-en-hog {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
index 47d3c0c49e8a0..bb2056746f8c9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
@@ -16,7 +16,7 @@
/plugin/;
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
index 7fcd8c851159a..45ac8bdce8699 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
@@ -19,14 +19,14 @@
/plugin/;
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "rs485_en";
};
- rs485_hd {
+ rs485-hd-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
index b19e38fc27bae..30aa620d7004d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
@@ -19,14 +19,14 @@
/plugin/;
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "rs485_en";
};
- rs485_hd {
+ rs485-hd-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
index 1f8ea20dfafcb..9bee7159a67b5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
@@ -20,7 +20,7 @@
};
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
index 3e6404340d529..e98f50bcec57f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
@@ -23,14 +23,14 @@
};
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "rs485_en";
};
- rs485_hd {
+ rs485-hd-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
index 2c71ab9854cb3..e875ff4637bd5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
@@ -23,14 +23,14 @@
};
&gpio4 {
- rs485_en {
+ rs485-en-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "rs485_en";
};
- rs485_hd {
+ rs485-hd-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-high;
--
2.34.1
next reply other threads:[~2024-09-02 19:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-02 19:30 Frank Li [this message]
2024-09-03 8:47 ` [PATCH v3 1/1] arm64: dts: imx: rename gpio hog as <gpio name>-hog Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240902193013.1456513-1-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.