From: Keith Busch <kbusch@meta.com>
To: <hch@lst.de>, <sagi@grimberg.me>, <linux-nvme@lists.infradead.org>
Cc: Keith Busch <kbusch@kernel.org>
Subject: [PATCH-part-2 4/9] nvme-pci: remove "dma_len" from nvme_iod
Date: Wed, 4 Sep 2024 11:38:12 -0700 [thread overview]
Message-ID: <20240904183818.713941-5-kbusch@meta.com> (raw)
In-Reply-To: <20240904183818.713941-1-kbusch@meta.com>
From: Keith Busch <kbusch@kernel.org>
This is redundant data that we can get from sgl nents and request data
length. Remove it to make the struct smaller.
Signed-off-by: Keith Busch <kbusch@kernel.org>
---
drivers/nvme/host/pci.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 77d42eaada742..3af4a226497c9 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -233,7 +233,6 @@ struct nvme_iod {
bool aborted;
s8 nr_allocations; /* PRP list pool allocations. 0 means small
pool in use */
- unsigned int dma_len; /* length of single DMA segment mapping */
dma_addr_t first_dma;
dma_addr_t meta_dma;
struct sg_table sgt;
@@ -554,14 +553,12 @@ static void nvme_unmap_data(struct nvme_dev *dev, struct request *req)
{
struct nvme_iod *iod = blk_mq_rq_to_pdu(req);
- if (iod->dma_len) {
- dma_unmap_page(dev->dev, iod->first_dma, iod->dma_len,
+ if (!iod->sgt.nents) {
+ dma_unmap_page(dev->dev, iod->first_dma, blk_rq_bytes(req),
rq_dma_dir(req));
return;
}
- WARN_ON_ONCE(!iod->sgt.nents);
-
dma_unmap_sgtable(dev->dev, &iod->sgt, rq_dma_dir(req), 0);
if (iod->nr_allocations == 0)
@@ -751,7 +748,6 @@ static blk_status_t nvme_setup_prp_simple(struct nvme_dev *dev,
iod->first_dma = dma_map_bvec(dev->dev, bv, rq_dma_dir(req), 0);
if (dma_mapping_error(dev->dev, iod->first_dma))
return BLK_STS_RESOURCE;
- iod->dma_len = bv->bv_len;
cmnd->dptr.prp1 = cpu_to_le64(iod->first_dma);
if (bv->bv_len > first_prp_len)
@@ -770,11 +766,10 @@ static blk_status_t nvme_setup_sgl_simple(struct nvme_dev *dev,
iod->first_dma = dma_map_bvec(dev->dev, bv, rq_dma_dir(req), 0);
if (dma_mapping_error(dev->dev, iod->first_dma))
return BLK_STS_RESOURCE;
- iod->dma_len = bv->bv_len;
cmnd->flags = NVME_CMD_SGL_METABUF;
cmnd->dptr.sgl.addr = cpu_to_le64(iod->first_dma);
- cmnd->dptr.sgl.length = cpu_to_le32(iod->dma_len);
+ cmnd->dptr.sgl.length = cpu_to_le32(bv->bv_len);
cmnd->dptr.sgl.type = NVME_SGL_FMT_DATA_DESC << 4;
return BLK_STS_OK;
}
@@ -786,7 +781,6 @@ static blk_status_t __nvme_map_data(struct nvme_dev *dev, struct request *req,
blk_status_t ret = BLK_STS_RESOURCE;
int rc;
- iod->dma_len = 0;
iod->sgt.sgl = mempool_alloc(dev->iod_mempool, GFP_ATOMIC);
if (!iod->sgt.sgl)
return BLK_STS_RESOURCE;
--
2.43.5
next prev parent reply other threads:[~2024-09-04 18:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-04 18:38 [PATCH-part-2 0/9] nvme support for sgl mptr, safe passthrough Keith Busch
2024-09-04 18:38 ` [PATCH-part-2 1/9] nvme-pci: use sgl capable helper function Keith Busch
2024-09-04 18:38 ` [PATCH-part-2 2/9] nvme-pci: provide prp selection helper Keith Busch
2024-09-06 11:22 ` Anuj Gupta
2024-09-04 18:38 ` [PATCH-part-2 3/9] nvme-pci: split out the simple dma mapping Keith Busch
2024-09-04 18:38 ` Keith Busch [this message]
2024-09-04 18:38 ` [PATCH-part-2 5/9] nvme-pci: simplify io setup function parameters Keith Busch
2024-09-06 11:24 ` Anuj Gupta
2024-09-04 18:38 ` [PATCH-part-2 6/9] nvme-pci: common dma pool alloc helper Keith Busch
2024-09-04 18:38 ` [PATCH-part-2 7/9] nvme-pci: provide a sgl mapping helper Keith Busch
2024-09-04 18:38 ` [PATCH-part-2 8/9] nvme-pci: add support for sgl metadata Keith Busch
2024-09-04 19:22 ` Keith Busch
2024-09-04 18:38 ` [PATCH-part-2 9/9] nvme: force sgls on user passthrough if possible Keith Busch
2024-09-04 19:23 ` Keith Busch
2024-09-06 17:29 ` [PATCH-part-2 0/9] nvme support for sgl mptr, safe passthrough Keith Busch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240904183818.713941-5-kbusch@meta.com \
--to=kbusch@meta.com \
--cc=hch@lst.de \
--cc=kbusch@kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.