From: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
To: <netdev@vger.kernel.org>
Cc: <davem@davemloft.net>, <linux@armlinux.org.uk>, <kuba@kernel.org>,
<andrew@lunn.ch>, <hkallweit1@gmail.com>,
<richardcochran@gmail.com>, <rdunlap@infradead.org>,
<bryan.whitehead@microchip.com>, <edumazet@google.com>,
<pabeni@redhat.com>, <maxime.chevallier@bootlin.com>,
<linux-kernel@vger.kernel.org>, <horms@kernel.org>,
<UNGLinuxDriver@microchip.com>
Subject: [PATCH net-next V6 5/5] net: lan743x: Add support to ethtool phylink get and set settings
Date: Fri, 6 Sep 2024 16:05:11 +0530 [thread overview]
Message-ID: <20240906103511.28416-6-Raju.Lakkaraju@microchip.com> (raw)
In-Reply-To: <20240906103511.28416-1-Raju.Lakkaraju@microchip.com>
Add support to ethtool phylink functions:
- get/set settings like speed, duplex etc
- get/set the wake-on-lan (WOL)
- get/set the energy-efficient ethernet (EEE)
- get/set the pause
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
---
Change List:
============
V5 -> V6:
- Add EEE enable check before calling lan743x_mac_eee_enable( ) function
V4 -> V5:
- Remove the "phydev->eee_enabled" check to update the MAC EEE
enable/disable
- Call lan743x_mac_eee_enable() with true after update tx_lpi_timer.
- Add phy_support_eee() to initialize the EEE flags
V3 -> V4:
- Remove the EEE private variables from LAN743x adapter strcture and fix the
EEE's set/get functions
- Change lan743x_set_eee( ) to lan743x_mac_eee_enable( )
- Fix the EEE's tx lpi counter update
V2 -> V3:
- No change
V1 -> V2:
- Fix the phylink changes
.../net/ethernet/microchip/lan743x_ethtool.c | 123 +++++++-----------
drivers/net/ethernet/microchip/lan743x_main.c | 22 ++++
drivers/net/ethernet/microchip/lan743x_main.h | 1 +
3 files changed, 67 insertions(+), 79 deletions(-)
diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index 0f1c0edec460..1a1cbd034eda 100644
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -1054,61 +1054,55 @@ static int lan743x_ethtool_get_eee(struct net_device *netdev,
struct ethtool_keee *eee)
{
struct lan743x_adapter *adapter = netdev_priv(netdev);
- struct phy_device *phydev = netdev->phydev;
- u32 buf;
- int ret;
-
- if (!phydev)
- return -EIO;
- if (!phydev->drv) {
- netif_err(adapter, drv, adapter->netdev,
- "Missing PHY Driver\n");
- return -EIO;
- }
- ret = phy_ethtool_get_eee(phydev, eee);
- if (ret < 0)
- return ret;
+ eee->tx_lpi_timer = lan743x_csr_read(adapter,
+ MAC_EEE_TX_LPI_REQ_DLY_CNT);
- buf = lan743x_csr_read(adapter, MAC_CR);
- if (buf & MAC_CR_EEE_EN_) {
- /* EEE_TX_LPI_REQ_DLY & tx_lpi_timer are same uSec unit */
- buf = lan743x_csr_read(adapter, MAC_EEE_TX_LPI_REQ_DLY_CNT);
- eee->tx_lpi_timer = buf;
- } else {
- eee->tx_lpi_timer = 0;
- }
-
- return 0;
+ return phylink_ethtool_get_eee(adapter->phylink, eee);
}
static int lan743x_ethtool_set_eee(struct net_device *netdev,
struct ethtool_keee *eee)
{
- struct lan743x_adapter *adapter;
- struct phy_device *phydev;
- u32 buf = 0;
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+ u32 tx_lpi_timer;
- if (!netdev)
- return -EINVAL;
- adapter = netdev_priv(netdev);
- if (!adapter)
- return -EINVAL;
- phydev = netdev->phydev;
- if (!phydev)
- return -EIO;
- if (!phydev->drv) {
- netif_err(adapter, drv, adapter->netdev,
- "Missing PHY Driver\n");
- return -EIO;
- }
+ tx_lpi_timer = lan743x_csr_read(adapter, MAC_EEE_TX_LPI_REQ_DLY_CNT);
+ if (tx_lpi_timer != eee->tx_lpi_timer) {
+ u32 mac_cr = lan743x_csr_read(adapter, MAC_CR);
+
+ /* Software should only change this field when Energy Efficient
+ * Ethernet Enable (EEEEN) is cleared.
+ * This function will trigger an autonegotiation restart and
+ * eee will be reenabled during link up if eee was negotiated.
+ */
+ lan743x_mac_eee_enable(adapter, false);
+ lan743x_csr_write(adapter, MAC_EEE_TX_LPI_REQ_DLY_CNT,
+ eee->tx_lpi_timer);
- if (eee->eee_enabled) {
- buf = (u32)eee->tx_lpi_timer;
- lan743x_csr_write(adapter, MAC_EEE_TX_LPI_REQ_DLY_CNT, buf);
+ if (mac_cr & MAC_CR_EEE_EN_)
+ lan743x_mac_eee_enable(adapter, true);
}
- return phy_ethtool_set_eee(phydev, eee);
+ return phylink_ethtool_set_eee(adapter->phylink, eee);
+}
+
+static int
+lan743x_ethtool_set_link_ksettings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+
+ return phylink_ethtool_ksettings_set(adapter->phylink, cmd);
+}
+
+static int
+lan743x_ethtool_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+
+ return phylink_ethtool_ksettings_get(adapter->phylink, cmd);
}
#ifdef CONFIG_PM
@@ -1120,8 +1114,7 @@ static void lan743x_ethtool_get_wol(struct net_device *netdev,
wol->supported = 0;
wol->wolopts = 0;
- if (netdev->phydev)
- phy_ethtool_get_wol(netdev->phydev, wol);
+ phylink_ethtool_get_wol(adapter->phylink, wol);
if (wol->supported != adapter->phy_wol_supported)
netif_warn(adapter, drv, adapter->netdev,
@@ -1162,7 +1155,7 @@ static int lan743x_ethtool_set_wol(struct net_device *netdev,
!(adapter->phy_wol_supported & WAKE_MAGICSECURE))
phy_wol.wolopts &= ~WAKE_MAGIC;
- ret = phy_ethtool_set_wol(netdev->phydev, &phy_wol);
+ ret = phylink_ethtool_set_wol(adapter->phylink, wol);
if (ret && (ret != -EOPNOTSUPP))
return ret;
@@ -1351,44 +1344,16 @@ static void lan743x_get_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pause)
{
struct lan743x_adapter *adapter = netdev_priv(dev);
- struct lan743x_phy *phy = &adapter->phy;
- if (phy->fc_request_control & FLOW_CTRL_TX)
- pause->tx_pause = 1;
- if (phy->fc_request_control & FLOW_CTRL_RX)
- pause->rx_pause = 1;
- pause->autoneg = phy->fc_autoneg;
+ phylink_ethtool_get_pauseparam(adapter->phylink, pause);
}
static int lan743x_set_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pause)
{
struct lan743x_adapter *adapter = netdev_priv(dev);
- struct phy_device *phydev = dev->phydev;
- struct lan743x_phy *phy = &adapter->phy;
-
- if (!phydev)
- return -ENODEV;
-
- if (!phy_validate_pause(phydev, pause))
- return -EINVAL;
-
- phy->fc_request_control = 0;
- if (pause->rx_pause)
- phy->fc_request_control |= FLOW_CTRL_RX;
- if (pause->tx_pause)
- phy->fc_request_control |= FLOW_CTRL_TX;
-
- phy->fc_autoneg = pause->autoneg;
-
- if (pause->autoneg == AUTONEG_DISABLE)
- lan743x_mac_flow_ctrl_set_enables(adapter, pause->tx_pause,
- pause->rx_pause);
- else
- phy_set_asym_pause(phydev, pause->rx_pause, pause->tx_pause);
-
- return 0;
+ return phylink_ethtool_set_pauseparam(adapter->phylink, pause);
}
const struct ethtool_ops lan743x_ethtool_ops = {
@@ -1413,8 +1378,8 @@ const struct ethtool_ops lan743x_ethtool_ops = {
.get_ts_info = lan743x_ethtool_get_ts_info,
.get_eee = lan743x_ethtool_get_eee,
.set_eee = lan743x_ethtool_set_eee,
- .get_link_ksettings = phy_ethtool_get_link_ksettings,
- .set_link_ksettings = phy_ethtool_set_link_ksettings,
+ .get_link_ksettings = lan743x_ethtool_get_link_ksettings,
+ .set_link_ksettings = lan743x_ethtool_set_link_ksettings,
.get_regs_len = lan743x_get_regs_len,
.get_regs = lan743x_get_regs,
.get_pauseparam = lan743x_get_pauseparam,
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index 2767bfa4bdec..4dc5adcda6a3 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -2966,6 +2966,18 @@ static int lan743x_phylink_2500basex_config(struct lan743x_adapter *adapter)
return lan743x_pcs_power_reset(adapter);
}
+void lan743x_mac_eee_enable(struct lan743x_adapter *adapter, bool enable)
+{
+ u32 mac_cr;
+
+ mac_cr = lan743x_csr_read(adapter, MAC_CR);
+ if (enable)
+ mac_cr |= MAC_CR_EEE_EN_;
+ else
+ mac_cr &= ~MAC_CR_EEE_EN_;
+ lan743x_csr_write(adapter, MAC_CR, mac_cr);
+}
+
static void lan743x_phylink_mac_config(struct phylink_config *config,
unsigned int link_an_mode,
const struct phylink_link_state *state)
@@ -3014,7 +3026,11 @@ static void lan743x_phylink_mac_link_down(struct phylink_config *config,
unsigned int link_an_mode,
phy_interface_t interface)
{
+ struct net_device *netdev = to_net_dev(config->dev);
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+
netif_tx_stop_all_queues(to_net_dev(config->dev));
+ lan743x_mac_eee_enable(adapter, false);
}
static void lan743x_phylink_mac_link_up(struct phylink_config *config,
@@ -3056,6 +3072,9 @@ static void lan743x_phylink_mac_link_up(struct phylink_config *config,
cap & FLOW_CTRL_TX,
cap & FLOW_CTRL_RX);
+ if (phydev)
+ lan743x_mac_eee_enable(adapter, phydev->enable_tx_lpi);
+
netif_tx_wake_all_queues(netdev);
}
@@ -3239,6 +3258,9 @@ static int lan743x_netdev_open(struct net_device *netdev)
goto close_tx;
}
+ if (netdev->phydev)
+ phy_support_eee(netdev->phydev);
+
#ifdef CONFIG_PM
if (adapter->netdev->phydev) {
struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index 7f73d66854be..8ef897c114d3 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -1206,5 +1206,6 @@ void lan743x_hs_syslock_release(struct lan743x_adapter *adapter);
void lan743x_mac_flow_ctrl_set_enables(struct lan743x_adapter *adapter,
bool tx_enable, bool rx_enable);
int lan743x_sgmii_read(struct lan743x_adapter *adapter, u8 mmd, u16 addr);
+void lan743x_mac_eee_enable(struct lan743x_adapter *adapter, bool enable);
#endif /* _LAN743X_H */
--
2.34.1
next prev parent reply other threads:[~2024-09-06 10:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-06 10:35 [PATCH net-next V6 0/5] Add support to PHYLINK for LAN743x/PCI11x1x chips Raju Lakkaraju
2024-09-06 10:35 ` [PATCH net-next V6 1/5] net: phylink: Add phylink_set_fixed_link() to configure fixed link state in phylink Raju Lakkaraju
2024-09-06 10:35 ` [PATCH net-next V6 2/5] net: lan743x: Create separate PCS power reset function Raju Lakkaraju
2024-09-06 10:35 ` [PATCH net-next V6 3/5] net: lan743x: Create separate Link Speed Duplex state function Raju Lakkaraju
2024-09-06 10:35 ` [PATCH net-next V6 4/5] net: lan743x: Migrate phylib to phylink Raju Lakkaraju
2024-09-17 15:59 ` Russell King (Oracle)
2024-09-06 10:35 ` Raju Lakkaraju [this message]
2024-09-11 10:10 ` [PATCH net-next V6 0/5] Add support to PHYLINK for LAN743x/PCI11x1x chips patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240906103511.28416-6-Raju.Lakkaraju@microchip.com \
--to=raju.lakkaraju@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=bryan.whitehead@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rdunlap@infradead.org \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.