From: Alex Williamson <alex.williamson@redhat.com>
To: zdravko delineshev <delineshev@outlook.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
kvm@vger.kernel.org
Subject: Re: nointxmask device
Date: Wed, 11 Sep 2024 16:12:48 -0600 [thread overview]
Message-ID: <20240911161248.1f05d7da.alex.williamson@redhat.com> (raw)
In-Reply-To: <20240910134918.GA579571@bhelgaas>
On Tue, 10 Sep 2024 08:49:18 -0500
Bjorn Helgaas <helgaas@kernel.org> wrote:
> [+cc Alex, kvm]
>
> On Tue, Sep 10, 2024 at 01:13:41PM +0000, zdravko delineshev wrote:
> >
> > Hello,
> >
> > i found a note in the vfio-pci parameters to email devices fixed by the nointxmask parameter.
> >
> > Here is the one i have and i am trying to pass trough. it is currently working fine, with nointxmask=1 .
What are the symptoms without using nointxmask=1? Please provide any
dmesg snippets in the host related to using this device.
> > 81:00.0 Audio device: Creative Labs EMU20k2 [Sound Blaster X-Fi Titanium Series] (rev 03)
> > Subsystem: Creative Labs EMU20k2 [Sound Blaster X-Fi Titanium Series]
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 32 bytes
> > Interrupt: pin A routed to IRQ 409
> > NUMA node: 1
> > IOMMU group: 23
> > Region 0: Memory at d3200000 (64-bit, non-prefetchable) [size=64K]
> > Region 2: Memory at d3000000 (64-bit, non-prefetchable) [size=2M]
> > Region 4: Memory at d2000000 (64-bit, non-prefetchable) [size=16M]
> > Capabilities: [40] Power Management version 3
> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
> > Address: 0000000000000000 Data: 0000
The device supports MSI, but the snd-ctxfs driver we have in the Linux
kernel has no support for it, therefore reporting zero for the INTx pin
is not an option.
Are you able to verify a kernel patch?
Adding it to the existing broken INTx quirk should simply be:
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a2ce4e08edf5..c7596e9aabb0 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3608,6 +3608,8 @@ DECLARE_PCI_FIXUP_FINAL(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
quirk_broken_intx_masking);
DECLARE_PCI_FIXUP_FINAL(0x1b7c, 0x0004, /* Ceton InfiniTV4 */
quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K2,
+ quirk_broken_intx_masking);
/*
* Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10)
Thanks,
Alex
> > Capabilities: [58] Express (v2) Endpoint, MSI 00
> > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0W
> > DevCtl: CorrErr- NonFatalErr- FatalErr+ UnsupReq-
> > RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
> > MaxPayload 128 bytes, MaxReadReq 512 bytes
> > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
> > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
> > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> > LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > LnkSta: Speed 2.5GT/s, Width x1
> > TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
> > DevCap2: Completion Timeout: Range ABCD, TimeoutDis- NROPrPrP- LTR-
> > 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
> > EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
> > FRS- TPHComp- ExtTPHComp-
> > AtomicOpsCap: 32bit- 64bit- 128bitCAS-
> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
> > AtomicOpsCtl: ReqEn-
> > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
> > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> > Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
> > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
> > EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
> > Retimer- 2Retimers- CrosslinkRes: unsupported
> > Capabilities: [100 v1] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
> > Capabilities: [300 v1] Advanced Error Reporting
> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> > UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
> > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
> > AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
> > MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
> > HeaderLog: 00000000 00000000 00000000 00000000
> > Kernel driver in use: vfio-pci
> > Kernel modules: snd_ctxfi
> > 00: 02 11 0b 00 46 01 10 00 03 00 03 04 08 00 00 00
> > 10: 04 00 20 d3 00 00 00 00 04 00 00 d3 00 00 00 00
> > 20: 04 00 00 d2 00 00 00 00 00 00 00 00 02 11 44 00
> > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
> > 40: 01 48 03 00 00 00 00 00 05 58 80 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 10 00 02 00 00 80 00 00
> > 60: 14 2c 20 00 11 0c 00 00 00 00 11 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
next prev parent reply other threads:[~2024-09-11 22:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <VI1PR10MB82076D45499546DE7B5BB9D4DB9A2@VI1PR10MB8207.EURPRD10.PROD.OUTLOOK.COM>
2024-09-10 13:13 ` nointxmask device zdravko delineshev
2024-09-10 13:49 ` Bjorn Helgaas
2024-09-11 22:12 ` Alex Williamson [this message]
2024-09-12 19:52 ` zdravko delineshev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240911161248.1f05d7da.alex.williamson@redhat.com \
--to=alex.williamson@redhat.com \
--cc=delineshev@outlook.com \
--cc=helgaas@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.