Re: [PATCH 18/21] dt-bindings: serial: adi,uart4: add adi,uart4 driver documentation

[Rob Herring <robh@kernel.org>]

On Thu, Sep 12, 2024 at 07:25:03PM +0100, Arturs Artamonovs wrote:
> Add serial driver bindings.

Don''t need 'documentation' in the the subject. That's redundant with 
'dt-bindings'.


> 
> Signed-off-by: Arturs Artamonovs <Arturs.Artamonovs@analog.com>

Your S-o-b goes last since you are sending the patch.

> Signed-off-by: Utsav Agarwal <Utsav.Agarwal@analog.com>

Not clear what Utsav's role was. Needs Co-developed-by?

> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
> Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
> Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
> ---
>  .../devicetree/bindings/serial/adi,uart.yaml       | 85 ++++++++++++++++++++++
>  1 file changed, 85 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/serial/adi,uart.yaml b/Documentation/devicetree/bindings/serial/adi,uart.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..de58059efa7e21acaa5b7f4984ffadca18f7f53a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/adi,uart.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/adi,uart4.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices UART Driver for SC5XX-family processors

Bindings aren't a driver.

> +
> +maintainers:
> +  - Arturs Artamonovs <arturs.artamonovs@analog.com>
> +  - Utsav Agarwal <Utsav.Agarwal@analog.com>
> +
> +description: |

Don't need '|'.

> +  Analog Devices UART Driver for SC59X-family processors
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,uart

Only 1 UART implementation for all of Analog Devices ever.

compatibles should be specific to SoC.

> +
> +  reg:
> +    maxItems: 1
> +
> +  dmas:
> +    maxItems: 2
> +    minItems: 2
> +    description: TX and RX DMA cluster numbers
> +
> +  dma-names:
> +    maxItems: 2
> +    minItems: 2
> +    description: DMA channel names (tx and rx)

Names need to be constraints, not freeform text. Plenty of examples to 
look at...

> +
> +  clocks:
> +    maxItems: 1
> +    description: Clock being used for UART

That's obvious. Drop description or say something unique to this device.

> +
> +  clock-names:
> +    maxItems: 1
> +    description: Clock name (sclk0)
> +
> +  interrupt-names:
> +    minItems: 3
> +    maxItems: 3
> +    description: Interrupt names (tx + rx + status)
> +
> +  interrupts:
> +    minItems: 3
> +    maxItems: 3
> +    description: GIC interrupt numbers
> +
> +  adi,use-edbo:
> +    type: boolean
> +    description: Enable divide by one in divisor

Versus divide by ???

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupt-names
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/clock/adi-sc5xx-clock.h>
> +
> +    uart0: uart@31003000 {

serial@...

Drop unused labels.

> +      compatible = "adi,uart";
> +      reg = <0x31003000 0x40>;
> +      clocks = <&clk ADSP_SC598_CLK_CGU0_SCLK0>;
> +      clock-names = "sclk0";
> +      interrupt-parent = <&gic>;
> +      interrupt-names = "tx", "rx", "status";
> +      interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> +      adi,use-edbo;
> +      status = "disabled";

Examples should be enabled. Drop.

> +    };
> +
> 
> -- 
> 2.25.1
>