[PATCH 17/19] drivers: mtd: nand: Enabled Kconfig and Makefile for Cadence-SPL

[dinesh.maniyam@intel.com]

From: Dinesh Maniyam <dinesh.maniyam@intel.com>

This patch is to enable the Kconfig and Makefile for the Cadence-Nand
SPL support in agilex5 family device.

Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
---
 drivers/mtd/nand/raw/Kconfig  | 7 +++++++
 drivers/mtd/nand/raw/Makefile | 1 +
 2 files changed, 8 insertions(+)

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 709c85c6e5..a9515c7b74 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -801,6 +801,13 @@ config SPL_NAND_AM33XX_BCH
 	  so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling
 	  SPL-NAND driver with software ECC correction support.
 
+config SPL_NAND_CADENCE
+	bool "Support Cadence NAND controller for SPL"
+	depends on SPL_NAND_SUPPORT
+	help
+	  This is a small implementation of the Cadence NAND controller
+	  for use on SPL.
+
 config SPL_NAND_DENALI
 	bool "Support Denali NAND controller for SPL"
 	depends on SPL_NAND_SUPPORT
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 4ad1a2037f..58fde3272f 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -10,6 +10,7 @@ NORMAL_DRIVERS=y
 endif
 
 obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o
+obj-$(CONFIG_SPL_NAND_CADENCE) += cadence_spl.o
 obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o
 obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
 obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
-- 
2.26.2