From: Serhii Iliushyk <sil-plv@napatech.com>
To: dev@dpdk.org
Cc: mko-plv@napatech.com, sil-plv@napatech.com, ckm@napatech.com,
andrew.rybchenko@oktetlabs.ru, ferruh.yigit@amd.com,
Danylo Vodopianov <dvo-plv@napatech.com>
Subject: [PATCH v1 14/14] net/ntnic: add functions for retrieving and managing packets
Date: Fri, 4 Oct 2024 17:35:08 +0200 [thread overview]
Message-ID: <20241004153551.267935-51-sil-plv@napatech.com> (raw)
In-Reply-To: <20241004153551.267935-1-sil-plv@napatech.com>
From: Danylo Vodopianov <dvo-plv@napatech.com>
Implemented functionality for retrieving received packets from
virtual queues, supporting both SPLIT_RING and PACKED_RING types.
Updated sg_ops structure to include the new packet retrieval functions.
Signed-off-by: Danylo Vodopianov <dvo-plv@napatech.com>
---
doc/guides/nics/ntnic.rst | 44 ++++
drivers/net/ntnic/dbsconfig/ntnic_dbsconfig.c | 216 ++++++++++++++++++
2 files changed, 260 insertions(+)
diff --git a/doc/guides/nics/ntnic.rst b/doc/guides/nics/ntnic.rst
index 7ac92c891c..9ac8098735 100644
--- a/doc/guides/nics/ntnic.rst
+++ b/doc/guides/nics/ntnic.rst
@@ -51,6 +51,50 @@ and they are also supported.
If vfio-pci is not required, kernel version 4.18 is supported.
+Configuration
+-------------
+
+Command line arguments
+~~~~~~~~~~~~~~~~~~~~~
+
+Following standard DPDK command line arguments are used by the PMD:
+
+ -a: Used to specifically define the NT adapter by PCI ID.
+ --iova-mode: Must be set to ‘pa’ for Physical Address mode.
+
+NTNIC specific arguments can be passed to the PMD in the PCI device parameter list::
+
+ <application> ... -a 0000:03:00.0[{,<NTNIC specific argument>}]
+
+The NTNIC specific argument format is::
+
+ <object>.<attribute>=[<object-ids>:]<value>
+
+Multiple arguments for the same device are separated by ‘,’ comma.
+<object-ids> can be a single value or a range.
+
+
+- ``rxqs`` parameter [int]
+
+ Specify number of RX queues to use.
+
+ To specify number of RX queues::
+
+ -a <domain>:<bus>:00.0,rxqs=4,txqs=4
+
+ By default, the value is set to 1.
+
+- ``txqs`` parameter [int]
+
+ Specify number of TX queues to use.
+
+ To specify number of TX queues::
+
+ -a <domain>:<bus>:00.0,rxqs=4,txqs=4
+
+ By default, the value is set to 1.
+
+
Logging and Debugging
---------------------
diff --git a/drivers/net/ntnic/dbsconfig/ntnic_dbsconfig.c b/drivers/net/ntnic/dbsconfig/ntnic_dbsconfig.c
index 6d7862791d..a5051891e8 100644
--- a/drivers/net/ntnic/dbsconfig/ntnic_dbsconfig.c
+++ b/drivers/net/ntnic/dbsconfig/ntnic_dbsconfig.c
@@ -58,6 +58,15 @@
} \
} while (0)
+#define inc_used(vq, num) do { \
+ struct nthw_virt_queue *temp_vq = (vq); \
+ temp_vq->next_used += (num); \
+ if (temp_vq->next_used >= temp_vq->queue_size) { \
+ temp_vq->next_used -= temp_vq->queue_size; \
+ temp_vq->used_wrap_count ^= 1; \
+ } \
+} while (0)
+
struct __rte_aligned(8) virtq_avail {
uint16_t flags;
uint16_t idx;
@@ -107,6 +116,10 @@ struct nthw_virt_queue {
struct pvirtq_event_suppress *driver_event;
struct pvirtq_event_suppress *device_event;
struct pvirtq_desc *desc;
+ struct {
+ uint16_t next;
+ uint16_t num;
+ } outs;
/*
* when in-order release used Tx packets from FPGA it may collapse
* into a batch. When getting new Tx buffers we may only need
@@ -1097,6 +1110,107 @@ nthw_setup_mngd_tx_virt_queue(nthw_dbs_t *p_nthw_dbs,
return NULL;
}
+static uint16_t nthw_get_rx_packets(struct nthw_virt_queue *rxvq,
+ uint16_t n,
+ struct nthw_received_packets *rp,
+ uint16_t *nb_pkts)
+{
+ uint16_t segs = 0;
+ uint16_t pkts = 0;
+
+ if (rxvq->vq_type == SPLIT_RING) {
+ uint16_t i;
+ uint16_t entries_ready = (uint16_t)(rxvq->cached_idx - rxvq->used_idx);
+
+ if (entries_ready < n) {
+ /* Look for more packets */
+ rxvq->cached_idx = rxvq->p_used->idx;
+ entries_ready = (uint16_t)(rxvq->cached_idx - rxvq->used_idx);
+
+ if (entries_ready == 0) {
+ *nb_pkts = 0;
+ return 0;
+ }
+
+ if (n > entries_ready)
+ n = entries_ready;
+ }
+
+ /*
+ * Give packets - make sure all packets are whole packets.
+ * Valid because queue_size is always 2^n
+ */
+ const uint16_t queue_mask = (uint16_t)(rxvq->queue_size - 1);
+ const uint32_t buf_len = rxvq->p_desc[0].len;
+
+ uint16_t used = rxvq->used_idx;
+
+ for (i = 0; i < n; ++i) {
+ uint32_t id = rxvq->p_used->ring[used & queue_mask].id;
+ rp[i].addr = rxvq->p_virtual_addr[id].virt_addr;
+ rp[i].len = rxvq->p_used->ring[used & queue_mask].len;
+
+ uint32_t pkt_len = ((struct _pkt_hdr_rx *)rp[i].addr)->cap_len;
+
+ if (pkt_len > buf_len) {
+ /* segmented */
+ int nbsegs = (pkt_len + buf_len - 1) / buf_len;
+
+ if (((int)i + nbsegs) > n) {
+ /* don't have enough segments - break out */
+ break;
+ }
+
+ int ii;
+
+ for (ii = 1; ii < nbsegs; ii++) {
+ ++i;
+ id = rxvq->p_used->ring[(used + ii) & queue_mask].id;
+ rp[i].addr = rxvq->p_virtual_addr[id].virt_addr;
+ rp[i].len =
+ rxvq->p_used->ring[(used + ii) & queue_mask].len;
+ }
+
+ used += nbsegs;
+
+ } else {
+ ++used;
+ }
+
+ pkts++;
+ segs = i + 1;
+ }
+
+ rxvq->used_idx = used;
+
+ } else if (rxvq->vq_type == PACKED_RING) {
+ /* This requires in-order behavior from FPGA */
+ int i;
+
+ for (i = 0; i < n; i++) {
+ struct pvirtq_desc *desc = &rxvq->desc[rxvq->next_used];
+
+ uint16_t flags = desc->flags;
+ uint8_t avail = !!(flags & VIRTQ_DESC_F_AVAIL);
+ uint8_t used = !!(flags & VIRTQ_DESC_F_USED);
+
+ if (avail != rxvq->used_wrap_count || used != rxvq->used_wrap_count)
+ break;
+
+ rp[pkts].addr = rxvq->p_virtual_addr[desc->id].virt_addr;
+ rp[pkts].len = desc->len;
+ pkts++;
+
+ inc_used(rxvq, 1);
+ }
+
+ segs = pkts;
+ }
+
+ *nb_pkts = pkts;
+ return segs;
+}
+
/*
* Put buffers back into Avail Ring
*/
@@ -1139,6 +1253,106 @@ static void nthw_release_rx_packets(struct nthw_virt_queue *rxvq, uint16_t n)
}
}
+static uint16_t nthw_get_tx_packets(struct nthw_virt_queue *txvq,
+ uint16_t n,
+ uint16_t *first_idx,
+ struct nthw_cvirtq_desc *cvq,
+ struct nthw_memory_descriptor **p_virt_addr)
+{
+ int m = 0;
+ uint16_t queue_mask =
+ (uint16_t)(txvq->queue_size - 1); /* Valid because queue_size is always 2^n */
+ *p_virt_addr = txvq->p_virtual_addr;
+
+ if (txvq->vq_type == SPLIT_RING) {
+ cvq->s = txvq->p_desc;
+ cvq->vq_type = SPLIT_RING;
+
+ *first_idx = txvq->tx_descr_avail_idx;
+
+ uint16_t entries_used =
+ (uint16_t)((txvq->tx_descr_avail_idx - txvq->cached_idx) & queue_mask);
+ uint16_t entries_ready = (uint16_t)(txvq->queue_size - 1 - entries_used);
+
+ vq_log_arg(txvq,
+ "ask %i: descrAvail %i, cachedidx %i, used: %i, ready %i used->idx %i\n",
+ n, txvq->tx_descr_avail_idx, txvq->cached_idx, entries_used, entries_ready,
+ txvq->p_used->idx);
+
+ if (entries_ready < n) {
+ /*
+ * Look for more packets.
+ * Using the used_idx in the avail ring since they are held synchronous
+ * because of in-order
+ */
+ txvq->cached_idx =
+ txvq->p_avail->ring[(txvq->p_used->idx - 1) & queue_mask];
+
+ vq_log_arg(txvq, "Update: get cachedidx %i (used_idx-1 %i)\n",
+ txvq->cached_idx, (txvq->p_used->idx - 1) & queue_mask);
+ entries_used =
+ (uint16_t)((txvq->tx_descr_avail_idx - txvq->cached_idx)
+ & queue_mask);
+ entries_ready = (uint16_t)(txvq->queue_size - 1 - entries_used);
+ vq_log_arg(txvq, "new used: %i, ready %i\n", entries_used, entries_ready);
+
+ if (n > entries_ready)
+ n = entries_ready;
+ }
+
+ } else if (txvq->vq_type == PACKED_RING) {
+ int i;
+
+ cvq->p = txvq->desc;
+ cvq->vq_type = PACKED_RING;
+
+ if (txvq->outs.num) {
+ *first_idx = txvq->outs.next;
+ uint16_t num = min(n, txvq->outs.num);
+ txvq->outs.next = (txvq->outs.next + num) & queue_mask;
+ txvq->outs.num -= num;
+
+ if (n == num)
+ return n;
+
+ m = num;
+ n -= num;
+
+ } else {
+ *first_idx = txvq->next_used;
+ }
+
+ /* iterate the ring - this requires in-order behavior from FPGA */
+ for (i = 0; i < n; i++) {
+ struct pvirtq_desc *desc = &txvq->desc[txvq->next_used];
+
+ uint16_t flags = desc->flags;
+ uint8_t avail = !!(flags & VIRTQ_DESC_F_AVAIL);
+ uint8_t used = !!(flags & VIRTQ_DESC_F_USED);
+
+ if (avail != txvq->used_wrap_count || used != txvq->used_wrap_count) {
+ n = i;
+ break;
+ }
+
+ uint16_t incr = (desc->id - txvq->next_used) & queue_mask;
+ i += incr;
+ inc_used(txvq, incr + 1);
+ }
+
+ if (i > n) {
+ int outs_num = i - n;
+ txvq->outs.next = (txvq->next_used - outs_num) & queue_mask;
+ txvq->outs.num = outs_num;
+ }
+
+ } else {
+ return 0;
+ }
+
+ return m + n;
+}
+
static void nthw_release_tx_packets(struct nthw_virt_queue *txvq, uint16_t n, uint16_t n_segs[])
{
int i;
@@ -1200,7 +1414,9 @@ static struct sg_ops_s sg_ops = {
.nthw_release_mngd_rx_virt_queue = nthw_release_mngd_rx_virt_queue,
.nthw_setup_mngd_tx_virt_queue = nthw_setup_mngd_tx_virt_queue,
.nthw_release_mngd_tx_virt_queue = nthw_release_mngd_tx_virt_queue,
+ .nthw_get_rx_packets = nthw_get_rx_packets,
.nthw_release_rx_packets = nthw_release_rx_packets,
+ .nthw_get_tx_packets = nthw_get_tx_packets,
.nthw_release_tx_packets = nthw_release_tx_packets,
.nthw_virt_queue_init = nthw_virt_queue_init
};
--
2.45.0
next prev parent reply other threads:[~2024-10-04 15:52 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-04 15:34 [PATCH v1 00/50] Provide: flow filter init API, Enable virtual queues, fix ntnic issues for release 24.07 Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 1/5] net/ntnic: update NT NiC PMD driver with FPGA version Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 2/5] net/ntnic: fix coverity issues: Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 3/5] net/ntnic: update documentation Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 4/5] net/ntnic: remove extra calling of the API for release port Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 5/5] net/ntnic: extend and fix logging implementation Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 01/31] net/ntnic: add flow filter init API Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 02/31] net/ntnic: add flow filter deinitialization API Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 03/31] net/ntnic: add flow backend initialization API Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 04/31] net/ntnic: add flow backend deinitialization API Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 05/31] net/ntnic: add INFO flow module Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 06/31] net/ntnic: add categorizer (CAT) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 07/31] net/ntnic: add key match (KM) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 08/31] net/ntnic: add flow matcher (FLM) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 09/31] net/ntnic: add IP fragmenter (IFR) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 10/31] net/ntnic: add hasher (HSH) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 11/31] net/ntnic: add queue select (QSL) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 12/31] net/ntnic: add slicer (SLC LR) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 13/31] net/ntnic: add packet descriptor builder (PDB) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 14/31] net/ntnic: add header field update (HFU) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 15/31] net/ntnic: add RPP local retransmit (RPP LR) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 16/31] net/ntnic: add copier (Tx CPY) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 17/31] net/ntnic: add checksum update (CSU) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 18/31] net/ntnic: add insert (Tx INS) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 19/31] net/ntnic: add replacer (Tx RPL) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 20/31] net/ntnic: add Tx Packet Editor (TPE) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 21/31] net/ntnic: add base init and deinit of the NT flow API Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 22/31] net/ntnic: add base init and deinit the NT flow backend Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 23/31] net/ntnic: add categorizer (CAT) FPGA module Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 24/31] net/ntnic: add key match (KM) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 25/31] net/ntnic: add flow matcher (FLM) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 26/31] net/ntnic: add hasher (HSH) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 27/31] net/ntnic: add queue select (QSL) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 28/31] net/ntnic: add slicer (SLC LR) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 29/31] net/ntnic: add packet descriptor builder (PDB) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 30/31] net/ntnic: add Tx Packet Editor (TPE) " Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 31/31] net/ntnic: add receive MAC converter (RMC) core module Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 01/14] net/ntnic: add basic queue operations Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 02/14] net/ntnic: enhance Ethernet device configuration Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 03/14] net/ntnic: add scatter-gather HW deallocation Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 04/14] net/ntnic: add queue setup operations Serhii Iliushyk
2024-10-04 15:34 ` [PATCH v1 05/14] net/ntnic: add packet handler for virtio queues Serhii Iliushyk
2024-10-04 15:35 ` [PATCH v1 06/14] net/ntnic: add init for virt queues in the DBS Serhii Iliushyk
2024-10-04 15:35 ` [PATCH v1 07/14] net/ntnic: add split-queue support Serhii Iliushyk
2024-10-04 15:35 ` [PATCH v1 08/14] net/ntnic: add functions for availability monitor management Serhii Iliushyk
2024-10-04 15:35 ` [PATCH v1 09/14] net/ntnic: used writer data handling functions Serhii Iliushyk
2024-10-04 15:35 ` [PATCH v1 10/14] net/ntnic: add descriptor reader " Serhii Iliushyk
2024-10-04 15:35 ` [PATCH v1 11/14] net/ntnic: update FPGA registeris related to DBS Serhii Iliushyk
2024-10-04 15:35 ` [PATCH v1 12/14] net/ntnic: virtqueue setup managed packed-ring was added Serhii Iliushyk
2024-10-04 15:35 ` [PATCH v1 13/14] net/ntnic: add functions for releasing virt queues Serhii Iliushyk
2024-10-04 15:35 ` Serhii Iliushyk [this message]
-- strict thread matches above, loose matches on Subject: below --
2024-10-04 15:06 [PATCH v1 0/5] Fixes for release 24.07 Serhii Iliushyk
2024-10-04 15:07 ` [PATCH v1 14/14] net/ntnic: add functions for retrieving and managing packets Serhii Iliushyk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241004153551.267935-51-sil-plv@napatech.com \
--to=sil-plv@napatech.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=ckm@napatech.com \
--cc=dev@dpdk.org \
--cc=dvo-plv@napatech.com \
--cc=ferruh.yigit@amd.com \
--cc=mko-plv@napatech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.