From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, gakhil@marvell.com, david.marchand@redhat.com
Cc: Gagandeep Singh <g.singh@nxp.com>, Jun Yang <jun.yang@nxp.com>,
Gagandeep Singh <G.singh@nxp.com>
Subject: [PATCH] crypto/dpaa2_sec: rework debug code
Date: Mon, 7 Oct 2024 14:10:14 +0530 [thread overview]
Message-ID: <20241007084014.851198-1-g.singh@nxp.com> (raw)
Output debug information according to various modes.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Signed-off-by: Gagandeep Singh <G.singh@nxp.com>
---
drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 87 +++++++++++++++------
1 file changed, 63 insertions(+), 24 deletions(-)
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 2cdf9308f8..1a897514e1 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -1097,7 +1097,7 @@ build_auth_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
static int
build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
- struct qbman_fd *fd, __rte_unused uint16_t bpid)
+ struct qbman_fd *fd, uint16_t bpid)
{
struct rte_crypto_sym_op *sym_op = op->sym;
struct qbman_fle *ip_fle, *op_fle, *sge, *fle;
@@ -1107,6 +1107,10 @@ build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
struct rte_mbuf *mbuf;
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
sess->iv.offset);
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ char debug_str[1024];
+ int offset;
+#endif
data_len = sym_op->cipher.data.length;
data_offset = sym_op->cipher.data.offset;
@@ -1212,14 +1216,26 @@ build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
DPAA2_SET_FD_COMPOUND_FMT(fd);
DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
- DPAA2_SEC_DP_DEBUG(
- "CIPHER SG: fdaddr =%" PRIx64 " bpid =%d meta =%d"
- " off =%d, len =%d",
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ offset = sprintf(debug_str,
+ "CIPHER SG: fdaddr =%" PRIx64 ", from %s pool ",
DPAA2_GET_FD_ADDR(fd),
- DPAA2_GET_FD_BPID(fd),
- rte_dpaa2_bpid_info[bpid].meta_data_size,
- DPAA2_GET_FD_OFFSET(fd),
- DPAA2_GET_FD_LEN(fd));
+ bpid < MAX_BPID ? "SW" : "BMAN");
+ if (bpid < MAX_BPID) {
+ offset += sprintf(&debug_str[offset],
+ "bpid = %d ", bpid);
+ }
+ offset += sprintf(&debug_str[offset],
+ "private size = %d ",
+ mbuf->pool->private_data_size);
+ offset += sprintf(&debug_str[offset],
+ "off =%d, len =%d",
+ DPAA2_GET_FD_OFFSET(fd), DPAA2_GET_FD_LEN(fd));
+ DPAA2_SEC_DP_DEBUG("%s", debug_str);
+#else
+ RTE_SET_USED(bpid);
+#endif
+
return 0;
}
@@ -1235,6 +1251,10 @@ build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
sess->iv.offset);
struct rte_mbuf *dst;
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ char debug_str[1024];
+ int offset;
+#endif
data_len = sym_op->cipher.data.length;
data_offset = sym_op->cipher.data.offset;
@@ -1326,14 +1346,23 @@ build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
DPAA2_SET_FLE_FIN(sge);
DPAA2_SET_FLE_FIN(fle);
- DPAA2_SEC_DP_DEBUG(
- "CIPHER: fdaddr =%" PRIx64 " bpid =%d meta =%d"
- " off =%d, len =%d",
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ offset = sprintf(debug_str,
+ "CIPHER: fdaddr =%" PRIx64 ", from %s pool ",
DPAA2_GET_FD_ADDR(fd),
- DPAA2_GET_FD_BPID(fd),
- rte_dpaa2_bpid_info[bpid].meta_data_size,
- DPAA2_GET_FD_OFFSET(fd),
- DPAA2_GET_FD_LEN(fd));
+ bpid < MAX_BPID ? "SW" : "BMAN");
+ if (bpid < MAX_BPID) {
+ offset += sprintf(&debug_str[offset],
+ "bpid = %d ", bpid);
+ }
+ offset += sprintf(&debug_str[offset],
+ "private size = %d ",
+ dst->pool->private_data_size);
+ offset += sprintf(&debug_str[offset],
+ "off =%d, len =%d",
+ DPAA2_GET_FD_OFFSET(fd), DPAA2_GET_FD_LEN(fd));
+ DPAA2_SEC_DP_DEBUG("%s", debug_str);
+#endif
return 0;
}
@@ -1566,6 +1595,10 @@ sec_fd_to_mbuf(const struct qbman_fd *fd, struct dpaa2_sec_qp *qp)
struct qbman_fle *fle;
struct rte_crypto_op *op;
struct rte_mbuf *dst, *src;
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ char debug_str[1024];
+ int offset;
+#endif
if (DPAA2_FD_GET_FORMAT(fd) == qbman_fd_single)
return sec_simple_fd_to_mbuf(fd);
@@ -1604,15 +1637,21 @@ sec_fd_to_mbuf(const struct qbman_fd *fd, struct dpaa2_sec_qp *qp)
dst->data_len = len;
}
- DPAA2_SEC_DP_DEBUG("mbuf %p BMAN buf addr %p,"
- " fdaddr =%" PRIx64 " bpid =%d meta =%d off =%d, len =%d",
- (void *)dst,
- dst->buf_addr,
- DPAA2_GET_FD_ADDR(fd),
- DPAA2_GET_FD_BPID(fd),
- rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size,
- DPAA2_GET_FD_OFFSET(fd),
- DPAA2_GET_FD_LEN(fd));
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ offset = sprintf(debug_str, "Mbuf %p from %s pool ",
+ dst, DPAA2_GET_FD_IVP(fd) ? "SW" : "BMAN");
+ if (!DPAA2_GET_FD_IVP(fd)) {
+ offset += sprintf(&debug_str[offset], "bpid = %d ",
+ DPAA2_GET_FD_BPID(fd));
+ }
+ offset += sprintf(&debug_str[offset],
+ "private size = %d ", dst->pool->private_data_size);
+ offset += sprintf(&debug_str[offset],
+ "addr %p, fdaddr =%" PRIx64 ", off =%d, len =%d",
+ dst->buf_addr, DPAA2_GET_FD_ADDR(fd),
+ DPAA2_GET_FD_OFFSET(fd), DPAA2_GET_FD_LEN(fd));
+ DPAA2_SEC_DP_DEBUG("%s", debug_str);
+#endif
/* free the fle memory */
if (likely(rte_pktmbuf_is_contiguous(src))) {
--
2.25.1
next reply other threads:[~2024-10-07 8:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-07 8:40 Gagandeep Singh [this message]
-- strict thread matches above, loose matches on Subject: below --
2024-10-07 8:43 [PATCH] crypto/dpaa2_sec: rework debug code Gagandeep Singh
2024-10-07 8:48 ` David Marchand
2024-10-07 15:25 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241007084014.851198-1-g.singh@nxp.com \
--to=g.singh@nxp.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=jun.yang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.