[PATCH 1/5] arm64: dts: imx8mp-kontron-bl-osm-s: Add HDMI connector

[Liu Ying <victor.liu@nxp.com>]

Add a HDMI connector to connect with i.MX8MP HDMI TX output.
This is a preparation for making the i.MX8MP LCDIF driver use
drm_bridge_connector which requires the DRM_BRIDGE_ATTACH_NO_CONNECTOR
flag.  With that flag, the DW HDMI bridge core driver would
try to attach the next bridge which is the HDMI connector.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
 .../dts/freescale/imx8mp-kontron-bl-osm-s.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
index 0eb9e726a9b8..445bf5a46c6a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
@@ -23,6 +23,17 @@ extcon_usbc: usbc {
 		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -168,6 +179,14 @@ &hdmi_tx {
 	pinctrl-0 = <&pinctrl_hdmi>;
 	ddc-i2c-bus = <&i2c2>;
 	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
 };
 
 &hdmi_tx_phy {
-- 
2.34.1