All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: shawnguo2@yeah.net
Cc: Frank.Li@nxp.com, conor+dt@kernel.org,
	devicetree@vger.kernel.org, festevam@gmail.com,
	imx@lists.linux.dev, kernel@pengutronix.de, krzk+dt@kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, robh@kernel.org,
	s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: [PATCH v3 2/4] arm64: dts: imx8dxl-evk: Add PCIe support
Date: Mon, 21 Oct 2024 15:06:00 -0400	[thread overview]
Message-ID: <20241021190602.1056492-2-Frank.Li@nxp.com> (raw)
In-Reply-To: <20241021190602.1056492-1-Frank.Li@nxp.com>

From: Richard Zhu <hongxing.zhu@nxp.com>

Add PCIe support on i.MX8DXL EVK board.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v2 to v3
- none
chagne from v1 to v2
- supports -> support
- add space before {
---
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 4caaecc192277..6259186cd4d92 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -182,6 +182,15 @@ mii_select: regulator-4 {
 		regulator-always-on;
 	};
 
+	reg_pcieb: regulator-pcieb {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "reg_pcieb";
+		gpio = <&pca6416_1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	bt_sco_codec: audio-codec-bt {
 		compatible = "linux,bt-sco";
 		#sound-dai-cells = <1>;
@@ -567,6 +576,12 @@ &flexcan3 {
 	status = "okay";
 };
 
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "output";
+	status = "okay";
+};
+
 &cm40_intmux {
 	status = "disabled";
 };
@@ -585,6 +600,16 @@ &lsio_gpio5 {
 	status = "okay";
 };
 
+&pcieb {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	status = "okay";
+};
+
 &sai0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai0>;
@@ -868,6 +893,14 @@ IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B    0x06000020
 		>;
 	};
 
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <
+			IMX8DXL_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000021
+			IMX8DXL_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000021
+			IMX8DXL_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000021
+		>;
+	};
+
 	pinctrl_sai0: sai0grp {
 		fsl,pins = <
 			IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD		0x06000060
-- 
2.34.1


  reply	other threads:[~2024-10-21 19:06 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-21 19:05 [PATCH v3 1/4] arm64: dts: imx8-ss-hsio: Add PCIe and SATA support Frank Li
2024-10-21 19:06 ` Frank Li [this message]
2024-10-21 19:06 ` [PATCH v3 3/4] arm64: dts: imx8qxp-mek: Add PCIe support Frank Li
2024-10-21 19:06 ` [PATCH v3 4/4] arm64: dts: imx8qm-mek: Add PCIe and SATA Frank Li
2024-10-22  3:36 ` [PATCH v3 1/4] arm64: dts: imx8-ss-hsio: Add PCIe and SATA support Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241021190602.1056492-2-Frank.Li@nxp.com \
    --to=frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo2@yeah.net \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.