All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: James Calligeros <jcalligeros99@gmail.com>
Cc: "Martin Povišer" <povik+lin@cutebit.org>,
	"David Rhodes" <david.rhodes@cirrus.com>,
	"Richard Fitzgerald" <rf@opensource.cirrus.com>,
	"Liam Girdwood" <lgirdwood@gmail.com>,
	"Mark Brown" <broonie@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Jaroslav Kysela" <perex@perex.cz>,
	"Takashi Iwai" <tiwai@suse.com>,
	asahi@lists.linux.dev, linux-sound@vger.kernel.org,
	patches@opensource.cirrus.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, "Hector Martin" <marcan@marcan.st>,
	"Neal Gompa" <neal@gompa.dev>
Subject: Re: [PATCH v2 1/3] dt-bindings: sound: Add CS42L84 codec
Date: Mon, 21 Oct 2024 14:26:32 -0500	[thread overview]
Message-ID: <20241021192632.GA965116-robh@kernel.org> (raw)
In-Reply-To: <20241020-cs42l84-v2-1-37ba2b6721d9@gmail.com>

On Sun, Oct 20, 2024 at 12:47:31AM +1000, James Calligeros wrote:
> From: Martin Povišer <povik+lin@cutebit.org>
> 
> CS42L84 is a headphone jack codec made by Cirrus Logic and seen in Apple
> computer models starting with 2021 Macbook Pros. It is not a publicly
> documented part. To a degree the part is similar to the public CS42L42.
> (The L84 superseded L83 seen in earlier Apple models, and the L83 was
> pretty much the same as L42.)

Why can't this be added to 
Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml?

I guess perhaps you don't know what the supplies look like? Do any of 
the custom properties apply?

> 
> Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
> Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
> Reviewed-by: Neal Gompa <neal@gompa.dev>
> ---
>  .../bindings/sound/cirrus,cs42l84.yaml   | 56 +++++++++++++++++++++++++
>  MAINTAINERS                              |  1 +
>  2 files changed, 57 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l84.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l84.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..7f8338e8ae369bc529ac3cf35041d5a7b9f3e6d1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l84.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/cirrus,cs42l84.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cirrus Logic CS42L84 audio CODEC
> +
> +maintainers:
> +  - Martin Povišer <povik+lin@cutebit.org>
> +
> +description: |

Don't need '|' if no formatting.

> +  The CS42L84 is a headphone jack codec made by Cirrus Logic and embedded
> +  in personal computers sold by Apple. It was first seen in 2021 Macbook
> +  Pro models. It has stereo DAC for playback, mono ADC for capture, and
> +  is somewhat similar to CS42L42 but with a different regmap.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - cirrus,cs42l84
> +
> +  reg:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  '#sound-dai-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      jack_codec: codec@4b {
> +          compatible = "cirrus,cs42l84";
> +          reg = <0x4b>;
> +          reset-gpios = <&pinctrl_nub 4 GPIO_ACTIVE_LOW>;
> +          interrupts-extended = <&pinctrl_ap 180 IRQ_TYPE_LEVEL_LOW>;
> +          #sound-dai-cells = <0>;
> +      };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c1a2c296446c0724a0c6e70c845e5e5e1e693fd5..f5f85714dc4e8ca9c60b3f6963b2cec1ea33fdd0 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2132,6 +2132,7 @@ L:	asahi@lists.linux.dev
>  L:	linux-sound@vger.kernel.org
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
> +F:	Documentation/devicetree/bindings/sound/cirrus,cs42l84.yaml
>  F:	Documentation/devicetree/bindings/sound/apple,*
>  F:	sound/soc/apple/*
>  F:	sound/soc/codecs/cs42l83-i2c.c
> 
> -- 
> 2.47.0
> 

  reply	other threads:[~2024-10-21 19:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-19 14:47 [PATCH v2 0/3] ASoC: add CS42L84 codec driver James Calligeros
2024-10-19 14:47 ` [PATCH v2 1/3] dt-bindings: sound: Add CS42L84 codec James Calligeros
2024-10-21 19:26   ` Rob Herring [this message]
2024-10-21 22:15     ` Mark Brown
2024-10-22  7:14       ` James Calligeros
2024-10-24 14:59   ` Rob Herring (Arm)
2024-10-24 15:09   ` Mark Brown
2024-10-19 14:47 ` [PATCH v2 2/3] ASoC: cs42l84: Add new codec driver James Calligeros
2024-10-19 14:47 ` [PATCH v2 3/3] ASoC: cs42l84: leverage ring sense IRQs to correctly detect headsets James Calligeros
2024-10-24 20:16 ` [PATCH v2 0/3] ASoC: add CS42L84 codec driver Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241021192632.GA965116-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=asahi@lists.linux.dev \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=david.rhodes@cirrus.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jcalligeros99@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=neal@gompa.dev \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=povik+lin@cutebit.org \
    --cc=rf@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.