Re: [PATCH v2 11/13] dt-bindings: iio: add binding for BME680 driver

[Rob Herring <robh@kernel.org>]

On Mon, Oct 21, 2024 at 09:53:14PM +0200, Vasileios Amoiridis wrote:
> Add dt-binding for BME680 gas sensor device. The device incorporates as
> well temperature, pressure and relative humidity sensors.

You aren't adding a binding for bme680, but extending it.

Drop the 2nd 'bindings' from subject. 

Something like this:

dt-bindings: iio/chemical: bosch,bme680: Add supply properties

> 
> Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
> ---
>  .../bindings/iio/chemical/bosch,bme680.yaml   | 64 +++++++++++++++++++
>  .../devicetree/bindings/trivial-devices.yaml  |  2 -
>  2 files changed, 64 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml b/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml
> new file mode 100644
> index 000000000000..e54df3afa7b2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/chemical/bosch,bme680.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bosch BME680 Gas sensor
> +
> +maintainers:
> +  - Vasileios Amoiridis <vassilisamir@gmail.com>
> +
> +description:

You need '>' to maintain paragraphs.

> +  BME680 is a gas sensor which combines relative humidity, barometric pressure,
> +  ambient temperature and gas (VOC - Volatile Organic Compounds) measurements.
> +
> +  https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme680-ds001.pdf
> +
> +properties:
> +  compatible:
> +    const: bosch,bme680
> +
> +  reg:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +  vddio-supply: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - vdd-supply
> +  - vddio-supply

These supplies can't be required. That's an ABI change from what was 
already supported.

> +
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        bme680@77 {
> +            compatible = "bosch,bme680";
> +            reg = <0x77>;
> +            vddio-supply = <&vddio>;
> +            vdd-supply = <&vdd>;
> +        };
> +    };
> +  - |
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        bme680@0 {
> +            compatible = "bosch,bme680";
> +            reg = <0>;
> +            spi-max-frequency = <500000>;
> +            vddio-supply = <&vddio>;
> +            vdd-supply = <&vdd>;
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> index 0108d7507215..3d9c08ed7bce 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -55,8 +55,6 @@ properties:
>            - atmel,atsha204a
>              # BPA-RS600: Power Supply
>            - blutek,bpa-rs600
> -            # Bosch Sensortec pressure, temperature, humididty and VOC sensor
> -          - bosch,bme680
>              # CM32181: Ambient Light Sensor
>            - capella,cm32181
>              # CM3232: Ambient Light Sensor
> -- 
> 2.43.0
>