From: Stephen Hemminger <stephen@networkplumber.org>
To: linux-usb@vger.kernel.org
Subject: USB warning on boot
Date: Fri, 25 Oct 2024 13:56:49 -0700 [thread overview]
Message-ID: <20241025135649.2d08be87@hermes.local> (raw)
This is on a new AMD based mini-PC with Debian testing (6.11.4-amd64).
Looks like a USB driver bug.
On every boot, this shows up in the log although the system seems to recover ok.
[ 2.085710] ACPI: bus type USB registered
[ 2.085745] usbcore: registered new interface driver usbfs
[ 2.085751] usbcore: registered new interface driver hub
[ 2.085765] usbcore: registered new device driver usb
[ 2.165810] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.165815] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 2.167015] i2c i2c-2: Successfully instantiated SPD at 0x50
[ 2.167731] i2c i2c-2: Successfully instantiated SPD at 0x51
[ 2.167784] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.266103] ACPI: bus type drm_connector registered
[ 2.334615] nvme nvme1: pci function 0000:05:00.0
[ 2.334615] nvme nvme0: pci function 0000:04:00.0
[ 2.342517] nvme nvme0: 8/0/0 default/read/poll queues
[ 2.345455] nvme0n1: p1 p2 p3
[ 2.346683] nvme nvme1: D3 entry latency set to 10 seconds
[ 2.352833] nvme nvme1: 32/0/0 default/read/poll queues
[ 2.355430] nvme1n1: p1 p2 p3
[ 2.766023] xhci_hcd 0000:08:00.3: xHCI Host Controller
[ 2.766031] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 1
[ 2.766378] xhci_hcd 0000:08:00.3: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000010
[ 2.766642] xhci_hcd 0000:08:00.3: xHCI Host Controller
[ 2.766644] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 2
[ 2.766646] xhci_hcd 0000:08:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.766691] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 2.766694] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.766695] usb usb1: Product: xHCI Host Controller
[ 2.766696] usb usb1: Manufacturer: Linux 6.11.4-amd64 xhci-hcd
[ 2.766697] usb usb1: SerialNumber: 0000:08:00.3
[ 2.766818] hub 1-0:1.0: USB hub found
[ 2.766823] hub 1-0:1.0: 2 ports detected
[ 2.766949] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.766965] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 2.766967] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.766969] usb usb2: Product: xHCI Host Controller
[ 2.766969] usb usb2: Manufacturer: Linux 6.11.4-amd64 xhci-hcd
[ 2.766970] usb usb2: SerialNumber: 0000:08:00.3
[ 2.767046] hub 2-0:1.0: USB hub found
[ 2.767051] hub 2-0:1.0: 2 ports detected
[ 2.767175] xhci_hcd 0000:08:00.4: xHCI Host Controller
[ 2.767179] xhci_hcd 0000:08:00.4: new USB bus registered, assigned bus number 3
[ 2.767536] xhci_hcd 0000:08:00.4: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000010
[ 2.767723] xhci_hcd 0000:08:00.4: xHCI Host Controller
[ 2.767725] xhci_hcd 0000:08:00.4: new USB bus registered, assigned bus number 4
[ 2.767726] xhci_hcd 0000:08:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.767764] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 2.767766] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.767767] usb usb3: Product: xHCI Host Controller
[ 2.767768] usb usb3: Manufacturer: Linux 6.11.4-amd64 xhci-hcd
[ 2.767769] usb usb3: SerialNumber: 0000:08:00.4
[ 2.767846] hub 3-0:1.0: USB hub found
[ 2.767852] hub 3-0:1.0: 2 ports detected
[ 2.767959] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.767983] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 2.767985] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.767986] usb usb4: Product: xHCI Host Controller
[ 2.767986] usb usb4: Manufacturer: Linux 6.11.4-amd64 xhci-hcd
[ 2.767987] usb usb4: SerialNumber: 0000:08:00.4
[ 2.768051] hub 4-0:1.0: USB hub found
[ 2.768057] hub 4-0:1.0: 2 ports detected
[ 2.768187] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 2.768190] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 5
[ 2.769475] xhci_hcd 0000:09:00.0: USB3 root hub has no ports
[ 2.769478] xhci_hcd 0000:09:00.0: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 2.769684] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 2.769686] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 6
[ 2.769688] xhci_hcd 0000:09:00.0: Host supports USB 3.0 SuperSpeed
[ 2.769713] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 2.769714] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.769715] usb usb5: Product: xHCI Host Controller
[ 2.769716] usb usb5: Manufacturer: Linux 6.11.4-amd64 xhci-hcd
[ 2.769717] usb usb5: SerialNumber: 0000:09:00.0
[ 2.769782] hub 5-0:1.0: USB hub found
[ 2.769786] hub 5-0:1.0: 1 port detected
[ 2.769866] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.769889] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 2.769891] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.769892] usb usb6: Product: xHCI Host Controller
[ 2.769893] usb usb6: Manufacturer: Linux 6.11.4-amd64 xhci-hcd
[ 2.769894] usb usb6: SerialNumber: 0000:09:00.0
[ 2.769957] hub 6-0:1.0: USB hub found
[ 2.769962] hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.024559] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 3.024587] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.176131] usb 5-1: New USB device found, idVendor=13d3, idProduct=3604, bcdDevice= 1.00
[ 3.176136] usb 5-1: New USB device strings: Mfr=5, Product=6, SerialNumber=7
[ 3.176138] usb 5-1: Product: Wireless_Device
[ 3.176139] usb 5-1: Manufacturer: MediaTek Inc.
[ 3.176140] usb 5-1: SerialNumber: 000000000
[ 3.177326] usb 1-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.13
[ 3.177327] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.177328] usb 1-1: Product: USB2.0 Hub
[ 3.177329] usb 1-1: Manufacturer: VIA Labs, Inc.
[ 3.177330] usb 1-1: SerialNumber: 000000000
[ 3.214766] hub 1-1:1.0: USB hub found
[ 3.215078] hub 1-1:1.0: 4 ports detected
[ 3.309956] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.428703] usb 2-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.13
[ 3.428709] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.428712] usb 2-1: Product: USB3.0 Hub
[ 3.428714] usb 2-1: Manufacturer: VIA Labs, Inc.
[ 3.428716] usb 2-1: SerialNumber: 000000000
[ 3.455128] hub 2-1:1.0: USB hub found
[ 3.455380] hub 2-1:1.0: 4 ports detected
[ 4.044556] usb 1-1.1: new full-speed USB device number 3 using xhci_hcd
[ 4.255602] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[ 4.255608] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.255610] usb 1-1.1: Product: USB Receiver
[ 4.255612] usb 1-1.1: Manufacturer: Logitech
[ 5.050203] [drm] amdgpu kernel modesetting enabled.
[ 5.050321] amdgpu: Virtual CRAT table created for CPU
[ 5.050337] amdgpu: Topology: Add CPU node
[ 5.050461] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[ 5.050528] [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x7480 0x1F4C:0xB006 0xC7).
[ 5.050540] [drm] register mmio base: 0xFC900000
[ 5.050542] [drm] register mmio size: 1048576
[ 5.054645] [drm] add ip block number 0 <soc21_common>
[ 5.054647] [drm] add ip block number 1 <gmc_v11_0>
[ 5.054648] [drm] add ip block number 2 <ih_v6_0>
[ 5.054650] [drm] add ip block number 3 <psp>
[ 5.054651] [drm] add ip block number 4 <smu>
[ 5.054652] [drm] add ip block number 5 <dm>
[ 5.054653] [drm] add ip block number 6 <gfx_v11_0>
[ 5.054654] [drm] add ip block number 7 <sdma_v6_0>
[ 5.054656] [drm] add ip block number 8 <vcn_v4_0>
[ 5.054657] [drm] add ip block number 9 <jpeg_v4_0>
[ 5.054658] [drm] add ip block number 10 <mes_v11_0>
[ 5.054670] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT
[ 5.054674] amdgpu: ATOM BIOS: 113-BRT138292-001
[ 5.055512] amdgpu 0000:03:00.0: amdgpu: CP RS64 enable
[ 5.056841] Console: switching to colour dummy device 80x25
[ 5.056858] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[ 5.056860] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 5.056913] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 5.056917] amdgpu 0000:03:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
[ 5.056919] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x00007FFF00000000 - 0x00007FFF1FFFFFFF
[ 5.056925] [drm] Detected VRAM RAM=8176M, BAR=8192M
[ 5.056926] [drm] RAM width 128bits GDDR6
[ 5.056997] [drm] amdgpu: 8176M of VRAM memory ready
[ 5.056998] [drm] amdgpu: 32004M of GTT memory ready.
[ 5.057008] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.057057] [drm] PCIE GART of 512M enabled (table at 0x00000081FEB00000).
[ 5.057390] [drm] Loading DMUB firmware via PSP: version=0x07002A00
[ 5.057504] [drm] Found VCN firmware Version ENC: 1.21 DEC: 8 VEP: 0 Revision: 1
[ 5.114319] amdgpu 0000:03:00.0: amdgpu: reserve 0x1300000 from 0x81fc000000 for PSP TMR
[ 5.168267] usb 1-1.2: new full-speed USB device number 4 using xhci_hcd
[ 5.208577] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 5.216010] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 5.216011] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 5.216045] amdgpu 0000:03:00.0: amdgpu: smu driver if version = 0x00000035, smu fw if version = 0x00000040, smu fw program = 0, smu fw version = 0x00525b00 (82.91.0)
[ 5.216047] amdgpu 0000:03:00.0: amdgpu: SMU driver if version not matched
[ 5.257112] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
[ 5.257496] [drm] Display Core v3.2.291 initialized on DCN 3.2.1
[ 5.257498] [drm] DP-HDMI FRL PCON supported
[ 5.259352] [drm] DMUB hardware initialized: version=0x07002A00
[ 5.335608] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01
[ 5.335613] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.335616] usb 1-1.2: Product: USB Receiver
[ 5.335618] usb 1-1.2: Manufacturer: Logitech
[ 5.500779] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 5.500791] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[ 5.500816] amdgpu: Virtual CRAT table created for GPU
[ 5.500902] amdgpu: Topology: Add dGPU node [0x7480:0x1002]
[ 5.500903] kfd kfd: amdgpu: added device 1002:7480
[ 5.500915] amdgpu 0000:03:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 8, active_cu_number 32
[ 5.500918] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 5.500920] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 5.500921] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 5.500922] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[ 5.500923] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[ 5.500924] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[ 5.500924] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[ 5.500925] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[ 5.500926] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[ 5.500927] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[ 5.500928] amdgpu 0000:03:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[ 5.500929] amdgpu 0000:03:00.0: amdgpu: ring vcn_unified_0 uses VM inv eng 0 on hub 8
[ 5.500930] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 1 on hub 8
[ 5.500931] amdgpu 0000:03:00.0: amdgpu: ring mes_kiq_3.1.0 uses VM inv eng 14 on hub 0
[ 5.505132] [drm] ring gfx_32768.1.1 was added
[ 5.505525] [drm] ring compute_32768.2.2 was added
[ 5.505854] [drm] ring sdma_32768.3.3 was added
[ 5.505923] [drm] ring gfx_32768.1.1 ib test pass
[ 5.505995] [drm] ring compute_32768.2.2 ib test pass
[ 5.506047] [drm] ring sdma_32768.3.3 ib test pass
[ 5.508950] amdgpu 0000:03:00.0: amdgpu: Using BOCO for runtime pm
[ 5.509275] [drm] Initialized amdgpu 3.59.0 for 0000:03:00.0 on minor 0
[ 5.516138] fbcon: amdgpudrmfb (fb0) is primary device
[ 5.516306] [drm] pre_validate_dsc:1578 MST_DSC dsc precompute is not needed
[ 5.644432] usb 2-1.4: new SuperSpeed USB device number 3 using xhci_hcd
[ 5.692417] usb 2-1.4: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04
[ 5.692420] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.692421] usb 2-1.4: Product: USB3.0 Hub
[ 5.692422] usb 2-1.4: Manufacturer: VIA Labs, Inc.
[ 5.710711] hub 2-1.4:1.0: USB hub found
[ 5.710890] hub 2-1.4:1.0: 4 ports detected
[ 5.820267] usb 1-1.4: new high-speed USB device number 5 using xhci_hcd
[ 5.855249] amdgpu 0000:03:00.0: [drm] REG_WAIT timeout 1us * 150000 tries - optc32_disable_crtc line:195
[ 5.960301] Console: switching to colour frame buffer device 160x45
[ 5.971698] usb 1-1.4: New USB device found, idVendor=2109, idProduct=2815, bcdDevice= 7.04
[ 5.971700] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.971702] usb 1-1.4: Product: USB2.0 Hub
[ 5.971703] usb 1-1.4: Manufacturer: VIA Labs, Inc.
[ 5.995689] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 6.030776] hub 1-1.4:1.0: USB hub found
[ 6.031209] hub 1-1.4:1.0: 4 ports detected
[ 6.318722] hid: raw HID events driver (C) Jiri Kosina
[ 6.351093] usb 2-1.4: reset SuperSpeed USB device number 3 using xhci_hcd
[ 6.439699] usbcore: registered new interface driver usbhid
[ 6.439704] usbhid: USB HID core driver
[ 6.525168] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52B.0001/input/input3
[ 6.680676] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:08:00.3-1.1/input0
[ 6.680851] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input4
[ 6.680941] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input5
[ 6.740748] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input6
[ 6.740874] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:08:00.3-1.1/input1
[ 6.741026] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:08:00.3-1.1/input2
[ 6.741138] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C548.0004/input/input8
[ 6.824309] usb 1-1.4.2: new full-speed USB device number 6 using xhci_hcd
[ 6.888681] hub 2-1.4:1.0: hub_ext_port_status failed (err = -71)
[ 6.888750] hid-generic 0003:046D:C548.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:08:00.3-1.2/input0
[ 6.889146] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C548.0005/input/input9
[ 6.889291] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C548.0005/input/input10
[ 6.897179] hub 2-1.4:1.0: hub_ext_port_status failed (err = -71)
[ 6.948638] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C548.0005/input/input11
[ 6.948724] hid-generic 0003:046D:C548.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:08:00.3-1.2/input1
[ 6.948866] hid-generic 0003:046D:C548.0006: hiddev2,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:08:00.3-1.2/input2
[ 6.998638] usb 1-1.4.2: New USB device found, idVendor=051d, idProduct=0002, bcdDevice= 0.90
[ 6.998645] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.998647] usb 1-1.4.2: Product: Back-UPS NS 1350M2 FW:954.e3 .D USB FW:e3
[ 6.998649] usb 1-1.4.2: Manufacturer: American Power Conversion
[ 6.998651] usb 1-1.4.2: SerialNumber: 3B1741X04129
[ 7.063179] usb 2-1.4: Failed to suspend device, error -71
[ 7.064083] hid-generic 0003:051D:0002.0007: hiddev3,hidraw6: USB HID v1.00 Device [American Power Conversion Back-UPS NS 1350M2 FW:954.e3 .D USB FW:e3 ] on usb-0000:08:00.3-1.4.2/input0
[ 7.253051] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:08:00.3-1.1/input2
[ 7.375346] input: Logitech Wireless Device PID:408a Keyboard as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:408A.0008/input/input12
[ 7.488348] input: Logitech Wireless Device PID:408a Mouse as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:408A.0008/input/input13
[ 7.488447] hid-generic 0003:046D:408A.0008: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:408a] on usb-0000:08:00.3-1.1/input2:2
[ 7.614869] usb 2-1.4: reset SuperSpeed USB device number 3 using xhci_hcd
[ 7.695030] input: Logitech MX Keys as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:408A.0008/input/input17
[ 7.792307] usb 1-1.4.3: new high-speed USB device number 7 using xhci_hcd
[ 7.796465] logitech-hidpp-device 0003:046D:408A.0008: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Keys] on usb-0000:08:00.3-1.1/input2:2
[ 8.162182] usb 1-1.4.3: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12
[ 8.162192] usb 1-1.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 8.162195] usb 1-1.4.3: SerialNumber: 1E0B63F0
[ 12.800382] usb 2-1.4: can't restore configuration #1 (error=-110)
[ 12.800679] hub 2-1.4:1.0: set hub depth failed
[ 12.976335] usb 1-1.4.4: new full-speed USB device number 8 using xhci_hcd
[ 13.148678] usb 1-1.4.4: New USB device found, idVendor=1532, idProduct=0531, bcdDevice= 1.00
[ 13.148687] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.148690] usb 1-1.4.4: Product: Razer Seiren Mini
[ 13.148692] usb 1-1.4.4: Manufacturer: Razer Inc
[ 13.148693] usb 1-1.4.4: SerialNumber: UC2116L03302382
[ 13.208273] hid-generic 0003:1532:0531.0009: No inputs registered, leaving
[ 13.208876] hid-generic 0003:1532:0531.0009: hidraw2: USB HID v1.11 Device [Razer Inc Razer Seiren Mini] on usb-0000:08:00.3-1.4.4/input2
[ 13.504573] usb 2-1.4: USB disconnect, device number 3
[ 13.604972] usb 2-1.4: Device not responding to setup address.
[ 13.820572] usb 2-1.4: Device not responding to setup address.
[ 14.028596] usb 2-1.4: device not accepting address 4, error -71
[ 14.357259] usb 2-1.4: new SuperSpeed USB device number 5 using xhci_hcd
[ 14.406294] usb 2-1.4: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04
[ 14.406304] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 14.406305] usb 2-1.4: Product: USB3.0 Hub
[ 14.406306] usb 2-1.4: Manufacturer: VIA Labs, Inc.
[ 14.431018] hub 2-1.4:1.0: USB hub found
[ 14.431150] hub 2-1.4:1.0: 4 ports detected
[ 15.071013] usb 2-1.4: reset SuperSpeed USB device number 5 using xhci_hcd
[ 15.188260] raid6: avx512x4 gen() 46185 MB/s
[ 15.256258] raid6: avx512x2 gen() 46715 MB/s
[ 15.324259] raid6: avx512x1 gen() 38221 MB/s
[ 15.392259] raid6: avx2x4 gen() 47513 MB/s
[ 15.460250] raid6: avx2x2 gen() 42067 MB/s
[ 15.528259] raid6: avx2x1 gen() 27728 MB/s
[ 15.528260] raid6: using algorithm avx2x4 gen() 47513 MB/s
[ 15.585606] ------------[ cut here ]------------
[ 15.585607] URB 00000000ed1c678e submitted while active
[ 15.585620] WARNING: CPU: 17 PID: 569 at drivers/usb/core/urb.c:379 usb_submit_urb+0x648/0x670 [usbcore]
[ 15.585632] Modules linked in: raid6_pq(+) libcrc32c crc32c_generic raid1 raid0 md_mod hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid amdgpu amdxcp drm_exec gpu_sched drm_buddy i2c_algo_bit drm_suballoc_helper drm_display_helper crct10dif_pclmul cec crc32_pclmul rc_core crc32c_intel drm_ttm_helper ghash_clmulni_intel ttm xhci_pci sha512_ssse3 drm_kms_helper xhci_hcd sha256_ssse3 nvme drm i2c_piix4 usbcore video sha1_ssse3 nvme_core igc crc16 i2c_smbus usb_common wmi button aesni_intel gf128mul crypto_simd cryptd
[ 15.585654] CPU: 17 UID: 0 PID: 569 Comm: kworker/17:1 Not tainted 6.11.4-amd64 #1 Debian 6.11.4-1
[ 15.585657] Hardware name: Micro Computer (HK) Tech Limited AtomMan G Series/DRBAA, BIOS 1.04 08/01/2024
[ 15.585658] Workqueue: events_power_efficient hub_init_func2 [usbcore]
[ 15.585665] RIP: 0010:usb_submit_urb+0x648/0x670 [usbcore]
[ 15.585672] Code: 6e 69 c0 e8 8a d3 29 ef eb d9 b8 fe ff ff ff e9 0f fd ff ff 48 89 fe 48 c7 c7 70 a9 6b c0 c6 05 41 d6 01 00 01 e8 38 49 c4 ee <0f> 0b eb 9f b8 f8 ff ff ff e9 eb fc ff ff 66 2e 0f 1f 84 00 00 00
[ 15.585673] RSP: 0018:ffffa5d101653db8 EFLAGS: 00010282
[ 15.585675] RAX: 0000000000000000 RBX: ffff8de07df5c600 RCX: 0000000000000003
[ 15.585676] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000001
[ 15.585677] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffa5d101653c38
[ 15.585678] R10: ffff8de07cfbffa8 R11: 0000000000000003 R12: ffff8dd19ebbd000
[ 15.585678] R13: ffff8dd1a8551000 R14: 0000000000000000 R15: 0000000000000005
[ 15.585679] FS: 0000000000000000(0000) GS:ffff8de07d880000(0000) knlGS:0000000000000000
[ 15.585680] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.585681] CR2: 0000564b523a70b0 CR3: 000000094ec22000 CR4: 0000000000750ef0
[ 15.585682] PKRU: 55555554
[ 15.585683] Call Trace:
[ 15.585685] <TASK>
[ 15.585686] ? usb_submit_urb+0x648/0x670 [usbcore]
[ 15.585691] ? __warn.cold+0x8e/0xe8
[ 15.585694] ? usb_submit_urb+0x648/0x670 [usbcore]
[ 15.585699] ? report_bug+0xff/0x140
[ 15.585701] ? console_unlock+0x84/0x130
[ 15.585703] ? handle_bug+0x3c/0x80
[ 15.585705] ? exc_invalid_op+0x17/0x70
[ 15.585707] ? asm_exc_invalid_op+0x1a/0x20
[ 15.585710] ? usb_submit_urb+0x648/0x670 [usbcore]
[ 15.585715] ? usb_submit_urb+0x648/0x670 [usbcore]
[ 15.585721] hub_activate+0x285/0x8a0 [usbcore]
[ 15.585726] ? srso_alias_return_thunk+0x5/0xfbef5
[ 15.585729] process_one_work+0x174/0x330
[ 15.585731] worker_thread+0x252/0x390
[ 15.585733] ? __pfx_worker_thread+0x10/0x10
[ 15.585735] kthread+0xcf/0x100
[ 15.585737] ? __pfx_kthread+0x10/0x10
[ 15.585739] ret_from_fork+0x31/0x50
[ 15.585741] ? __pfx_kthread+0x10/0x10
[ 15.585743] ret_from_fork_asm+0x1a/0x30
[ 15.585746] </TASK>
[ 15.585747] ---[ end trace 0000000000000000 ]---
[ 15.585748] hub 2-1.4:1.0: activate --> -16
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 2109:2817 VIA Labs, Inc. USB2.0 Hub
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 004: ID 046d:c548 Logitech, Inc. Logi Bolt Receiver
Bus 001 Device 005: ID 2109:2815 VIA Labs, Inc. USB2.0 Hub
Bus 001 Device 006: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 001 Device 007: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 001 Device 008: ID 1532:0531 Razer USA, Ltd Razer Seiren Mini
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 2109:0817 VIA Labs, Inc. USB3.0 Hub
Bus 002 Device 022: ID 2109:0815 VIA Labs, Inc. USB3.0 Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 13d3:3604 IMC Networks Wireless_Device
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14d8
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 14d9
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14da
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 14db
00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 14db
00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 14db
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14da
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 14db
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14da
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 14db
00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14da
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14da
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 14dd
00:08.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 14dd
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 71)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14e0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14e1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14e2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14e3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14e4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14e5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14e6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 14e7
01:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch (rev 12)
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch (rev 12)
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 33 [Radeon RX 7600/7600 XT/7600M XT/7600S/7700S / PRO W7600] (rev c7)
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 31 HDMI/DP Audio
04:00.0 Non-Volatile memory controller: Intel Corporation SSD 660P Series (rev 03)
05:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO
06:00.0 Network controller: MEDIATEK Corp. Device 7925
07:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04)
08:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Phoenix PCIe Dummy Function (rev d8)
08:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 19h PSP/CCP
08:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15b6
08:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15b7
08:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] ACP/ACP3X/ACP6x Audio Coprocessor (rev 62)
08:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller
09:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15b8
next reply other threads:[~2024-10-25 20:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-25 20:56 Stephen Hemminger [this message]
2024-10-25 22:03 ` USB warning on boot Alan Stern
2024-10-25 22:23 ` Stephen Hemminger
2024-10-26 2:23 ` Alan Stern
2024-11-05 4:53 ` Stephen Hemminger
2024-11-05 16:31 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241025135649.2d08be87@hermes.local \
--to=stephen@networkplumber.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.