From: Kuniyuki Iwashima <kuniyu@amazon.com>
To: <x86@kernel.org>, <linux-edac@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: Tony Luck <tony.luck@intel.com>, Borislav Petkov <bp@alien8.de>,
"Thomas Gleixner" <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
"H. Peter Anvin" <hpa@zytor.com>,
"Benjamin Herrenschmidt" <benh@amazon.com>,
Kuniyuki Iwashima <kuniyu@amazon.com>
Subject: WARNING in lmce_supported() during reboot.
Date: Fri, 25 Oct 2024 16:13:20 -0700 [thread overview]
Message-ID: <20241025231320.45417-1-kuniyu@amazon.com> (raw)
Hello x86 maintainers,
We have seen the splat below few times when just rebooting hosts.
It rarely happens and seems a timing related, so we don't have a
reproducer.
Our kernel source in the splat is here,
https://github.com/amazonlinux/linux/tree/kernel-6.1.61-85.141.amzn2023
and the triggered WARN_ON_ONCE() in lmce_supported() is here.
https://github.com/amazonlinux/linux/blob/kernel-6.1.61-85.141.amzn2023/arch/x86/kernel/cpu/mce/intel.c#L124
Do you have any hint ?
Thanks in advance.
ACPI: PM: Preparing to enter system sleep state S5
reboot: Restarting system
reboot: machine restart
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/mce/intel.c:124 lmce_supported (arch/x86/kernel/cpu/mce/intel.c:124 arch/x86/kernel/cpu/mce/intel.c:99)
Modules linked in: ib_core binfmt_misc ext4 crc16 mbcache jbd2 sunrpc mousedev atkbd psmouse ghash_clmulni_intel vivaldi_fmap libps2 aesni_intel crypto_simd cryptd i8042 serio ena button sch_fq_codel dm_mod fuse configfs dax loop dmi_sysfs simpledrm drm_shmem_helper drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea drm i2c_core drm_panel_orientation_quirks backlight fb crc32_pclmul crc32c_intel fbdev efivarfs
Hardware name: Amazon EC2 c6i.4xlarge/, BIOS 1.0 10/16/2017
RIP: 0010:lmce_supported (arch/x86/kernel/cpu/mce/intel.c:124 arch/x86/kernel/cpu/mce/intel.c:99)
Code: 81 fb 00 00 00 09 75 da b9 3a 00 00 00 0f 32 48 c1 e2 20 48 09 c2 48 89 d3 66 90 48 89 d8 48 c1 e8 14 83 e0 01 83 e3 01 75 ba <0f> 0b 31 c0 eb b4 31 d2 48 89 de bf 3a 00 00 00 e8 6b e6 57 00 eb
All code
========
0: 81 fb 00 00 00 09 cmp $0x9000000,%ebx
6: 75 da jne 0xffffffffffffffe2
8: b9 3a 00 00 00 mov $0x3a,%ecx
d: 0f 32 rdmsr
f: 48 c1 e2 20 shl $0x20,%rdx
13: 48 09 c2 or %rax,%rdx
16: 48 89 d3 mov %rdx,%rbx
19: 66 90 xchg %ax,%ax
1b: 48 89 d8 mov %rbx,%rax
1e: 48 c1 e8 14 shr $0x14,%rax
22: 83 e0 01 and $0x1,%eax
25: 83 e3 01 and $0x1,%ebx
28: 75 ba jne 0xffffffffffffffe4
2a:* 0f 0b ud2 <-- trapping instruction
2c: 31 c0 xor %eax,%eax
2e: eb b4 jmp 0xffffffffffffffe4
30: 31 d2 xor %edx,%edx
32: 48 89 de mov %rbx,%rsi
35: bf 3a 00 00 00 mov $0x3a,%edi
3a: e8 6b e6 57 00 call 0x57e6aa
3f: eb .byte 0xeb
Code starting with the faulting instruction
===========================================
0: 0f 0b ud2
2: 31 c0 xor %eax,%eax
4: eb b4 jmp 0xffffffffffffffba
6: 31 d2 xor %edx,%edx
8: 48 89 de mov %rbx,%rsi
b: bf 3a 00 00 00 mov $0x3a,%edi
10: e8 6b e6 57 00 call 0x57e680
15: eb .byte 0xeb
RSP: 0018:ffffa18f00154fb8 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000003a
RDX: 0000000000000000 RSI: 00000000000000ff RDI: ffff965cfe2599c0
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffa18f00154ff8 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff965cfe240000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8485dfba30 CR3: 0000000389a10003 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
? mce_intel_feature_clear (arch/x86/kernel/cpu/mce/intel.c:465 arch/x86/kernel/cpu/mce/intel.c:502)
? lmce_supported (arch/x86/kernel/cpu/mce/intel.c:124 arch/x86/kernel/cpu/mce/intel.c:99)
? __warn (kernel/panic.c:672)
? lmce_supported (arch/x86/kernel/cpu/mce/intel.c:124 arch/x86/kernel/cpu/mce/intel.c:99)
? report_bug (lib/bug.c:201 lib/bug.c:219)
? handle_bug (arch/x86/kernel/traps.c:324)
? exc_invalid_op (arch/x86/kernel/traps.c:345 (discriminator 1))
? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:568)
? lmce_supported (arch/x86/kernel/cpu/mce/intel.c:124 arch/x86/kernel/cpu/mce/intel.c:99)
? clear_local_APIC (./arch/x86/include/asm/apic.h:393 arch/x86/kernel/apic/apic.c:1192)
mce_intel_feature_clear (arch/x86/kernel/cpu/mce/intel.c:465 arch/x86/kernel/cpu/mce/intel.c:502)
stop_this_cpu (arch/x86/kernel/process.c:780)
__sysvec_reboot (arch/x86/kernel/smp.c:140)
sysvec_reboot (arch/x86/kernel/smp.c:136 (discriminator 14))
</IRQ>
<TASK>
asm_sysvec_reboot (./arch/x86/include/asm/idtentry.h:656)
RIP: 0010:acpi_idle_do_entry (./arch/x86/include/asm/irqflags.h:40 ./arch/x86/include/asm/irqflags.h:75 drivers/acpi/processor_idle.c:113 drivers/acpi/processor_idle.c:572)
Code: 75 08 48 8b 15 b1 81 df 02 ed c3 cc cc cc cc 65 48 8b 04 25 00 ff 01 00 48 8b 00 a8 08 75 eb 66 90 0f 00 2d 58 c8 6a 00 fb f4 <fa> c3 cc cc cc cc e9 01 fc ff ff 90 0f 1f 44 00 00 41 56 41 55 41
All code
========
0: 75 08 jne 0xa
2: 48 8b 15 b1 81 df 02 mov 0x2df81b1(%rip),%rdx # 0x2df81ba
9: ed in (%dx),%eax
a: c3 ret
b: cc int3
c: cc int3
d: cc int3
e: cc int3
f: 65 48 8b 04 25 00 ff mov %gs:0x1ff00,%rax
16: 01 00
18: 48 8b 00 mov (%rax),%rax
1b: a8 08 test $0x8,%al
1d: 75 eb jne 0xa
1f: 66 90 xchg %ax,%ax
21: 0f 00 2d 58 c8 6a 00 verw 0x6ac858(%rip) # 0x6ac880
28: fb sti
29: f4 hlt
2a:* fa cli <-- trapping instruction
2b: c3 ret
2c: cc int3
2d: cc int3
2e: cc int3
2f: cc int3
30: e9 01 fc ff ff jmp 0xfffffffffffffc36
35: 90 nop
36: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
3b: 41 56 push %r14
3d: 41 55 push %r13
3f: 41 rex.B
Code starting with the faulting instruction
===========================================
0: fa cli
1: c3 ret
2: cc int3
3: cc int3
4: cc int3
5: cc int3
6: e9 01 fc ff ff jmp 0xfffffffffffffc0c
b: 90 nop
c: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
11: 41 56 push %r14
13: 41 55 push %r13
15: 41 rex.B
RSP: 0018:ffffa18f000afe70 EFLAGS: 00000246
RAX: 0000000000004000 RBX: ffff965603d92400 RCX: 4000000000000000
RDX: ffff965cfe240000 RSI: ffff965601478800 RDI: ffff965601478864
RBP: 0000000000000001 R08: ffffffffb62182c0 R09: 0000000000000000
R10: 0000000000002703 R11: 000000000001993d R12: 0000000000000001
R13: ffffffffb6218340 R14: 0000000000000001 R15: 0000000000000000
acpi_idle_enter (drivers/acpi/processor_idle.c:711 (discriminator 3))
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:239)
cpuidle_enter (drivers/cpuidle/cpuidle.c:358)
cpuidle_idle_call (kernel/sched/idle.c:240)
do_idle (kernel/sched/idle.c:305)
cpu_startup_entry (kernel/sched/idle.c:400 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:215 arch/x86/kernel/smpboot.c:249)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:358)
</TASK>
---[ end trace 0000000000000000 ]---
next reply other threads:[~2024-10-25 23:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-25 23:13 Kuniyuki Iwashima [this message]
2024-10-25 23:26 ` WARNING in lmce_supported() during reboot Benjamin Herrenschmidt
2024-10-25 23:57 ` Luck, Tony
2024-10-25 23:58 ` Dave Hansen
2024-10-26 2:33 ` Benjamin Herrenschmidt
2024-10-28 15:46 ` Dave Hansen
2024-10-30 2:26 ` Zhuo, Qiuxu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241025231320.45417-1-kuniyu@amazon.com \
--to=kuniyu@amazon.com \
--cc=benh@amazon.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.