From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,willy@infradead.org,konishi.ryusuke@gmail.com,akpm@linux-foundation.org
Subject: [merged mm-nonmm-stable] nilfs2-convert-common-metadata-file-code-to-be-folio-based.patch removed from -mm tree
Date: Tue, 05 Nov 2024 17:14:14 -0800 [thread overview]
Message-ID: <20241106011415.7127CC4CECF@smtp.kernel.org> (raw)
The quilt patch titled
Subject: nilfs2: convert common metadata file code to be folio-based
has been removed from the -mm tree. Its filename was
nilfs2-convert-common-metadata-file-code-to-be-folio-based.patch
This patch was dropped because it was merged into the mm-nonmm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Subject: nilfs2: convert common metadata file code to be folio-based
Date: Thu, 24 Oct 2024 18:25:36 +0900
In the common routines for metadata files, nilfs_mdt_insert_new_block(),
which inserts a new block buffer into the cache, is still page-based, and
there are two places where bh_offset() is used. Convert these to
page-based.
Link: https://lkml.kernel.org/r/20241024092602.13395-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/nilfs2/alloc.c | 8 +++++---
fs/nilfs2/cpfile.c | 4 ++--
fs/nilfs2/mdt.c | 21 +++++++++++++--------
3 files changed, 20 insertions(+), 13 deletions(-)
--- a/fs/nilfs2/alloc.c~nilfs2-convert-common-metadata-file-code-to-be-folio-based
+++ a/fs/nilfs2/alloc.c
@@ -177,12 +177,14 @@ nilfs_palloc_entry_blkoff(const struct i
* nilfs_palloc_desc_block_init - initialize buffer of a group descriptor block
* @inode: inode of metadata file
* @bh: buffer head of the buffer to be initialized
- * @kaddr: kernel address mapped for the page including the buffer
+ * @from: kernel address mapped for a chunk of the block
+ *
+ * This function does not yet support the case where block size > PAGE_SIZE.
*/
static void nilfs_palloc_desc_block_init(struct inode *inode,
- struct buffer_head *bh, void *kaddr)
+ struct buffer_head *bh, void *from)
{
- struct nilfs_palloc_group_desc *desc = kaddr + bh_offset(bh);
+ struct nilfs_palloc_group_desc *desc = from;
unsigned long n = nilfs_palloc_groups_per_desc_block(inode);
__le32 nfrees;
--- a/fs/nilfs2/cpfile.c~nilfs2-convert-common-metadata-file-code-to-be-folio-based
+++ a/fs/nilfs2/cpfile.c
@@ -113,9 +113,9 @@ nilfs_cpfile_block_get_checkpoint(const
static void nilfs_cpfile_block_init(struct inode *cpfile,
struct buffer_head *bh,
- void *kaddr)
+ void *from)
{
- struct nilfs_checkpoint *cp = kaddr + bh_offset(bh);
+ struct nilfs_checkpoint *cp = from;
size_t cpsz = NILFS_MDT(cpfile)->mi_entry_size;
int n = nilfs_cpfile_checkpoints_per_block(cpfile);
--- a/fs/nilfs2/mdt.c~nilfs2-convert-common-metadata-file-code-to-be-folio-based
+++ a/fs/nilfs2/mdt.c
@@ -33,7 +33,8 @@ nilfs_mdt_insert_new_block(struct inode
struct buffer_head *, void *))
{
struct nilfs_inode_info *ii = NILFS_I(inode);
- void *kaddr;
+ struct folio *folio = bh->b_folio;
+ void *from;
int ret;
/* Caller exclude read accesses using page lock */
@@ -47,12 +48,14 @@ nilfs_mdt_insert_new_block(struct inode
set_buffer_mapped(bh);
- kaddr = kmap_local_page(bh->b_page);
- memset(kaddr + bh_offset(bh), 0, i_blocksize(inode));
+ /* Initialize block (block size > PAGE_SIZE not yet supported) */
+ from = kmap_local_folio(folio, offset_in_folio(folio, bh->b_data));
+ memset(from, 0, bh->b_size);
if (init_block)
- init_block(inode, bh, kaddr);
- flush_dcache_page(bh->b_page);
- kunmap_local(kaddr);
+ init_block(inode, bh, from);
+ kunmap_local(from);
+
+ flush_dcache_folio(folio);
set_buffer_uptodate(bh);
mark_buffer_dirty(bh);
@@ -571,7 +574,8 @@ int nilfs_mdt_freeze_buffer(struct inode
if (!bh_frozen)
bh_frozen = create_empty_buffers(folio, 1 << blkbits, 0);
- bh_frozen = get_nth_bh(bh_frozen, bh_offset(bh) >> blkbits);
+ bh_frozen = get_nth_bh(bh_frozen,
+ offset_in_folio(folio, bh->b_data) >> blkbits);
if (!buffer_uptodate(bh_frozen))
nilfs_copy_buffer(bh_frozen, bh);
@@ -601,7 +605,8 @@ nilfs_mdt_get_frozen_buffer(struct inode
if (!IS_ERR(folio)) {
bh_frozen = folio_buffers(folio);
if (bh_frozen) {
- n = bh_offset(bh) >> inode->i_blkbits;
+ n = offset_in_folio(folio, bh->b_data) >>
+ inode->i_blkbits;
bh_frozen = get_nth_bh(bh_frozen, n);
}
folio_unlock(folio);
_
Patches currently in -mm which might be from konishi.ryusuke@gmail.com are
reply other threads:[~2024-11-06 1:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241106011415.7127CC4CECF@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=konishi.ryusuke@gmail.com \
--cc=mm-commits@vger.kernel.org \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.