Re: [net-next PATCH v3 3/3] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY

[Maxime Chevallier <maxime.chevallier@bootlin.com>]

Hello Christian,

On Wed,  6 Nov 2024 13:22:38 +0100
Christian Marangi <ansuelsmth@gmail.com> wrote:

> Add support for Airoha AN8855 Internal Switch Gigabit PHY.
> 
> This is a simple PHY driver to configure and calibrate the PHY for the
> AN8855 Switch with the use of NVMEM cells.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

[...]

> +static int an8855_get_downshift(struct phy_device *phydev, u8 *data)
> +{
> +	int saved_page;
> +	int val;
> +	int ret;
> +
> +	saved_page = phy_select_page(phydev, AN8855_PHY_PAGE_EXTENDED_1);
> +	if (saved_page >= 0)
> +		val = __phy_read(phydev, AN8855_PHY_EXT_REG_14);
> +	ret = phy_restore_page(phydev, saved_page, val);

I think this can be replaced with phy_read_paged()

[...]

> +static int an8855_set_downshift(struct phy_device *phydev, u8 cnt)
> +{
> +	int saved_page;
> +	int ret;
> +
> +	saved_page = phy_select_page(phydev, AN8855_PHY_PAGE_EXTENDED_1);
> +	if (saved_page >= 0) {
> +		if (cnt != DOWNSHIFT_DEV_DISABLE)
> +			ret = __phy_set_bits(phydev, AN8855_PHY_EXT_REG_14,
> +					     AN8855_PHY_EN_DOWN_SHFIT);
> +		else
> +			ret = __phy_clear_bits(phydev, AN8855_PHY_EXT_REG_14,
> +					       AN8855_PHY_EN_DOWN_SHFIT);
> +	}
> +
> +	return phy_restore_page(phydev, saved_page, ret);

And this by phy_modify_paged() :)

Thanks,

Maxime