From: david regan <dregan@broadcom.com>
To: u-boot@lists.denx.de,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
Anand Gore <anand.gore@broadcom.com>,
William Zhang <william.zhang@broadcom.com>,
Kursad Oney <kursad.oney@broadcom.com>,
Philippe Reynes <philippe.reynes@softathome.com>,
Linus Walleij <linus.walleij@linaro.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Kamal Dasu <kamal.dasu@broadcom.com>,
Tom Rini <trini@konsulko.com>,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
dregan@mail.com, dregan@broadcom.com
Subject: [PATCH v2 2/4] arm: dts: Use upstream dts
Date: Tue, 12 Nov 2024 22:27:13 -0800 [thread overview]
Message-ID: <20241113062715.2872-3-dregan@broadcom.com> (raw)
In-Reply-To: <20241113062715.2872-1-dregan@broadcom.com>
Make use of OF_UPSTREAM which uses Linux dts.
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
---
arch/arm/dts/bcm47622.dtsi | 126 ------------
arch/arm/dts/bcm4912.dtsi | 128 ------------
arch/arm/dts/bcm63146.dtsi | 110 ----------
arch/arm/dts/bcm63158.dtsi | 278 --------------------------
arch/arm/dts/bcm63178.dtsi | 120 -----------
arch/arm/dts/bcm6756.dtsi | 130 ------------
arch/arm/dts/bcm6813.dtsi | 128 ------------
arch/arm/dts/bcm6855.dtsi | 257 ------------------------
arch/arm/dts/bcm6856.dtsi | 253 -----------------------
arch/arm/dts/bcm6858.dtsi | 272 -------------------------
arch/arm/dts/bcm6878.dtsi | 111 ----------
arch/arm/dts/bcm947622.dts | 30 ---
arch/arm/dts/bcm94912.dts | 30 ---
arch/arm/dts/bcm963146.dts | 30 ---
arch/arm/dts/bcm963158.dts | 30 ---
arch/arm/dts/bcm963178.dts | 30 ---
arch/arm/dts/bcm96756.dts | 30 ---
arch/arm/dts/bcm96813.dts | 30 ---
arch/arm/dts/bcm96855.dts | 30 ---
arch/arm/dts/bcm96856.dts | 30 ---
arch/arm/dts/bcm96858.dts | 30 ---
arch/arm/dts/bcm96878.dts | 30 ---
arch/arm/mach-bcmbca/bcm47622/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm4912/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm63146/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm63158/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm63178/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6756/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6813/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6855/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6856/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6858/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6878/Kconfig | 1 +
configs/bcm947622_defconfig | 11 +-
configs/bcm94912_defconfig | 11 +-
configs/bcm963146_defconfig | 11 +-
configs/bcm963158_defconfig | 11 +-
configs/bcm963178_defconfig | 11 +-
configs/bcm96756_defconfig | 11 +-
configs/bcm96813_defconfig | 11 +-
configs/bcm96855_defconfig | 11 +-
configs/bcm96856_defconfig | 11 +-
configs/bcm96858_defconfig | 11 +-
configs/bcm96878_defconfig | 11 +-
44 files changed, 121 insertions(+), 2254 deletions(-)
delete mode 100644 arch/arm/dts/bcm47622.dtsi
delete mode 100644 arch/arm/dts/bcm4912.dtsi
delete mode 100644 arch/arm/dts/bcm63146.dtsi
delete mode 100644 arch/arm/dts/bcm63158.dtsi
delete mode 100644 arch/arm/dts/bcm63178.dtsi
delete mode 100644 arch/arm/dts/bcm6756.dtsi
delete mode 100644 arch/arm/dts/bcm6813.dtsi
delete mode 100644 arch/arm/dts/bcm6855.dtsi
delete mode 100644 arch/arm/dts/bcm6856.dtsi
delete mode 100644 arch/arm/dts/bcm6858.dtsi
delete mode 100644 arch/arm/dts/bcm6878.dtsi
delete mode 100644 arch/arm/dts/bcm947622.dts
delete mode 100644 arch/arm/dts/bcm94912.dts
delete mode 100644 arch/arm/dts/bcm963146.dts
delete mode 100644 arch/arm/dts/bcm963158.dts
delete mode 100644 arch/arm/dts/bcm963178.dts
delete mode 100644 arch/arm/dts/bcm96756.dts
delete mode 100644 arch/arm/dts/bcm96813.dts
delete mode 100644 arch/arm/dts/bcm96855.dts
delete mode 100644 arch/arm/dts/bcm96856.dts
delete mode 100644 arch/arm/dts/bcm96858.dts
delete mode 100644 arch/arm/dts/bcm96878.dts
diff --git a/arch/arm/dts/bcm47622.dtsi b/arch/arm/dts/bcm47622.dtsi
deleted file mode 100644
index c016e12b7372..000000000000
--- a/arch/arm/dts/bcm47622.dtsi
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm47622", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
- CA7_3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>,
- <&CA7_2>, <&CA7_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- cpu_off = <1>;
- cpu_on = <2>;
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x818000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm4912.dtsi b/arch/arm/dts/bcm4912.dtsi
deleted file mode 100644
index 3d016c2ce675..000000000000
--- a/arch/arm/dts/bcm4912.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm4912", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm63146.dtsi b/arch/arm/dts/bcm63146.dtsi
deleted file mode 100644
index 04de96bd0a03..000000000000
--- a/arch/arm/dts/bcm63146.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm63146", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm63158.dtsi b/arch/arm/dts/bcm63158.dtsi
deleted file mode 100644
index 4bed1f914a9b..000000000000
--- a/arch/arm/dts/bcm63158.dtsi
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2019 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm63158", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks {
- bootph-all;
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
-
- leds: led-controller@800 {
- compatible = "brcm,bcm6858-leds";
- reg = <0x800 0xe4>;
-
- status = "disabled";
- };
-
- wdt1: watchdog@480 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x480 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@4c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x4c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- hsspi: spi-controller@1000 {
- compatible = "brcm,bcm6328-hsspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1000 0x600>;
- clocks = <&hsspi_pll>, <&hsspi_pll>;
- clock-names = "hsspi", "pll";
- spi-max-frequency = <100000000>;
- num-cs = <8>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm63158",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm63178.dtsi b/arch/arm/dts/bcm63178.dtsi
deleted file mode 100644
index cbd094dde6d0..000000000000
--- a/arch/arm/dts/bcm63178.dtsi
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm63178", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>,
- <&CA7_2>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6756.dtsi b/arch/arm/dts/bcm6756.dtsi
deleted file mode 100644
index ce1b59faf800..000000000000
--- a/arch/arm/dts/bcm6756.dtsi
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm6756", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>,
- <&CA7_2>, <&CA7_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6813.dtsi b/arch/arm/dts/bcm6813.dtsi
deleted file mode 100644
index c3e6197be808..000000000000
--- a/arch/arm/dts/bcm6813.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm6813", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6855.dtsi b/arch/arm/dts/bcm6855.dtsi
deleted file mode 100644
index 10c003a57c95..000000000000
--- a/arch/arm/dts/bcm6855.dtsi
+++ /dev/null
@@ -1,257 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2022 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm6855", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
- };
-
- clocks: clocks {
- bootph-all;
-
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
-
- wdt1: watchdog@480 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x480 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@4c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x4c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm6753",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
-
- leds: led-controller@3000 {
- compatible = "brcm,bcm6753-leds";
- reg = <0x3000 0x3480>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6856.dtsi b/arch/arm/dts/bcm6856.dtsi
deleted file mode 100644
index 38c88f8399bb..000000000000
--- a/arch/arm/dts/bcm6856.dtsi
+++ /dev/null
@@ -1,253 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm6856", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>;
- };
-
- clocks: clocks {
- bootph-all;
-
- periph_clk:periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>, /* GICD */
- <0x2000 0x2000>, /* GICC */
- <0x4000 0x2000>, /* GICH */
- <0x6000 0x2000>; /* GICV */
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@640 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x640 0x18>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
- clock-names = "refclk";
- status = "disabled";
- };
-
- wdt1: watchdog@480 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x480 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@4c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x4c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- leds: led-controller@800 {
- compatible = "brcm,bcm6858-leds";
- reg = <0x800 0xe4>;
-
- status = "disabled";
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- hsspi: spi-controller@1000 {
- compatible = "brcm,bcm6328-hsspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1000 0x600>;
- clocks = <&hsspi_pll>, <&hsspi_pll>;
- clock-names = "hsspi", "pll";
- spi-max-frequency = <100000000>;
- num-cs = <8>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm68360",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6858.dtsi b/arch/arm/dts/bcm6858.dtsi
deleted file mode 100644
index dc95047a2659..000000000000
--- a/arch/arm/dts/bcm6858.dtsi
+++ /dev/null
@@ -1,272 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm6858", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks {
- bootph-all;
-
- periph_clk: periph_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>, /* GICD */
- <0x2000 0x2000>, /* GICC */
- <0x4000 0x2000>, /* GICH */
- <0x6000 0x2000>; /* GICV */
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@640 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x640 0x18>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
- clock-names = "refclk";
- status = "disabled";
- };
-
- leds: led-controller@800 {
- compatible = "brcm,bcm6858-leds";
- reg = <0x800 0xe4>;
-
- status = "disabled";
- };
-
- wdt1: watchdog@2780 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x2780 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@27c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x27c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- hsspi: spi-controller@1000 {
- compatible = "brcm,bcm6328-hsspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1000 0x600>;
- clocks = <&hsspi_pll>, <&hsspi_pll>;
- clock-names = "hsspi", "pll";
- spi-max-frequency = <100000000>;
- num-cs = <8>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm6858",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6878.dtsi b/arch/arm/dts/bcm6878.dtsi
deleted file mode 100644
index 1e8b5fa96c25..000000000000
--- a/arch/arm/dts/bcm6878.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm6878", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm947622.dts b/arch/arm/dts/bcm947622.dts
deleted file mode 100644
index 6f083724ab8e..000000000000
--- a/arch/arm/dts/bcm947622.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm47622.dtsi"
-
-/ {
- model = "Broadcom BCM947622 Reference Board";
- compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm94912.dts b/arch/arm/dts/bcm94912.dts
deleted file mode 100644
index a3623e6f6919..000000000000
--- a/arch/arm/dts/bcm94912.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm4912.dtsi"
-
-/ {
- model = "Broadcom BCM94912 Reference Board";
- compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm963146.dts b/arch/arm/dts/bcm963146.dts
deleted file mode 100644
index e39f1e6d4774..000000000000
--- a/arch/arm/dts/bcm963146.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63146.dtsi"
-
-/ {
- model = "Broadcom BCM963146 Reference Board";
- compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm963158.dts b/arch/arm/dts/bcm963158.dts
deleted file mode 100644
index eba07e0b1ca6..000000000000
--- a/arch/arm/dts/bcm963158.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63158.dtsi"
-
-/ {
- model = "Broadcom BCM963158 Reference Board";
- compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm963178.dts b/arch/arm/dts/bcm963178.dts
deleted file mode 100644
index fa096e9cde23..000000000000
--- a/arch/arm/dts/bcm963178.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63178.dtsi"
-
-/ {
- model = "Broadcom BCM963178 Reference Board";
- compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96756.dts b/arch/arm/dts/bcm96756.dts
deleted file mode 100644
index 9a4a87ba9c8a..000000000000
--- a/arch/arm/dts/bcm96756.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6756.dtsi"
-
-/ {
- model = "Broadcom BCM96756 Reference Board";
- compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96813.dts b/arch/arm/dts/bcm96813.dts
deleted file mode 100644
index af17091ae764..000000000000
--- a/arch/arm/dts/bcm96813.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6813.dtsi"
-
-/ {
- model = "Broadcom BCM96813 Reference Board";
- compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96855.dts b/arch/arm/dts/bcm96855.dts
deleted file mode 100644
index e4e740c73e97..000000000000
--- a/arch/arm/dts/bcm96855.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6855.dtsi"
-
-/ {
- model = "Broadcom BCM96855 Reference Board";
- compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96856.dts b/arch/arm/dts/bcm96856.dts
deleted file mode 100644
index 032aeb75c983..000000000000
--- a/arch/arm/dts/bcm96856.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6856.dtsi"
-
-/ {
- model = "Broadcom BCM96856 Reference Board";
- compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96858.dts b/arch/arm/dts/bcm96858.dts
deleted file mode 100644
index 0cbf582f5d54..000000000000
--- a/arch/arm/dts/bcm96858.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6858.dtsi"
-
-/ {
- model = "Broadcom BCM96858 Reference Board";
- compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96878.dts b/arch/arm/dts/bcm96878.dts
deleted file mode 100644
index 8fbc175cb452..000000000000
--- a/arch/arm/dts/bcm96878.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6878.dtsi"
-
-/ {
- model = "Broadcom BCM96878 Reference Board";
- compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/mach-bcmbca/bcm47622/Kconfig b/arch/arm/mach-bcmbca/bcm47622/Kconfig
index bce30892e35d..56ce280a1cde 100644
--- a/arch/arm/mach-bcmbca/bcm47622/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm47622/Kconfig
@@ -8,6 +8,7 @@ if BCM47622
config TARGET_BCM947622
bool "Broadcom 47622 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm47622"
diff --git a/arch/arm/mach-bcmbca/bcm4912/Kconfig b/arch/arm/mach-bcmbca/bcm4912/Kconfig
index b8c14d1dc1a1..9844ddeb8b8b 100644
--- a/arch/arm/mach-bcmbca/bcm4912/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm4912/Kconfig
@@ -8,6 +8,7 @@ if BCM4912
config TARGET_BCM94912
bool "Broadcom 4912 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm4912"
diff --git a/arch/arm/mach-bcmbca/bcm63146/Kconfig b/arch/arm/mach-bcmbca/bcm63146/Kconfig
index 690cbf1eb20a..7c26742e4742 100644
--- a/arch/arm/mach-bcmbca/bcm63146/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm63146/Kconfig
@@ -8,6 +8,7 @@ if BCM63146
config TARGET_BCM963146
bool "Broadcom 63146 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm63146"
diff --git a/arch/arm/mach-bcmbca/bcm63158/Kconfig b/arch/arm/mach-bcmbca/bcm63158/Kconfig
index b77444369ec9..6db7b36aa327 100644
--- a/arch/arm/mach-bcmbca/bcm63158/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm63158/Kconfig
@@ -8,6 +8,7 @@ if BCM63158
config TARGET_BCM963158
bool "Broadcom 63158 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm63158"
diff --git a/arch/arm/mach-bcmbca/bcm63178/Kconfig b/arch/arm/mach-bcmbca/bcm63178/Kconfig
index 73ac46284b2c..167acfff2c9d 100644
--- a/arch/arm/mach-bcmbca/bcm63178/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm63178/Kconfig
@@ -8,6 +8,7 @@ if BCM63178
config TARGET_BCM963178
bool "Broadcom 63178 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm63178"
diff --git a/arch/arm/mach-bcmbca/bcm6756/Kconfig b/arch/arm/mach-bcmbca/bcm6756/Kconfig
index c83dcd0f3e2b..bbaa45eaab0a 100644
--- a/arch/arm/mach-bcmbca/bcm6756/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6756/Kconfig
@@ -8,6 +8,7 @@ if BCM6756
config TARGET_BCM96756
bool "Broadcom 6756 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6756"
diff --git a/arch/arm/mach-bcmbca/bcm6813/Kconfig b/arch/arm/mach-bcmbca/bcm6813/Kconfig
index 25a4221bef9c..0cda69cb43ee 100644
--- a/arch/arm/mach-bcmbca/bcm6813/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6813/Kconfig
@@ -8,6 +8,7 @@ if BCM6813
config TARGET_BCM96813
bool "Broadcom 6813 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6813"
diff --git a/arch/arm/mach-bcmbca/bcm6855/Kconfig b/arch/arm/mach-bcmbca/bcm6855/Kconfig
index 78087c7dd59d..31eaaed7ca24 100644
--- a/arch/arm/mach-bcmbca/bcm6855/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6855/Kconfig
@@ -8,6 +8,7 @@ if BCM6855
config TARGET_BCM96855
bool "Broadcom 6855 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6855"
diff --git a/arch/arm/mach-bcmbca/bcm6856/Kconfig b/arch/arm/mach-bcmbca/bcm6856/Kconfig
index 6ac75cb84095..7b09a1577bb1 100644
--- a/arch/arm/mach-bcmbca/bcm6856/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6856/Kconfig
@@ -8,6 +8,7 @@ if BCM6856
config TARGET_BCM96856
bool "Broadcom 6856 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6856"
diff --git a/arch/arm/mach-bcmbca/bcm6858/Kconfig b/arch/arm/mach-bcmbca/bcm6858/Kconfig
index a6504bae1f18..d32107a17a89 100644
--- a/arch/arm/mach-bcmbca/bcm6858/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6858/Kconfig
@@ -8,6 +8,7 @@ if BCM6858
config TARGET_BCM96858
bool "Broadcom 6858 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6858"
diff --git a/arch/arm/mach-bcmbca/bcm6878/Kconfig b/arch/arm/mach-bcmbca/bcm6878/Kconfig
index 43f8942c9b1d..2365cfde6ec2 100644
--- a/arch/arm/mach-bcmbca/bcm6878/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6878/Kconfig
@@ -8,6 +8,7 @@ if BCM6878
config TARGET_BCM96878
bool "Broadcom 6878 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6878"
diff --git a/configs/bcm947622_defconfig b/configs/bcm947622_defconfig
index 71057f1dc042..cf0651c65023 100644
--- a/configs/bcm947622_defconfig
+++ b/configs/bcm947622_defconfig
@@ -8,7 +8,7 @@ CONFIG_TARGET_BCM947622=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm947622"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm947622"
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM47622"
@@ -16,6 +16,15 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm94912_defconfig b/configs/bcm94912_defconfig
index 5b6de30cd8b5..bce823b90418 100644
--- a/configs/bcm94912_defconfig
+++ b/configs/bcm94912_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM94912=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm94912"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm94912"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM4912"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm963146_defconfig b/configs/bcm963146_defconfig
index 5033b069d7d3..691d055e310c 100644
--- a/configs/bcm963146_defconfig
+++ b/configs/bcm963146_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM963146=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm963146"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm963146"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM63146"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm963158_defconfig b/configs/bcm963158_defconfig
index c3010d979085..6e4a85ec3a3c 100644
--- a/configs/bcm963158_defconfig
+++ b/configs/bcm963158_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM963158=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm963158"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm963158"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM63158"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm963178_defconfig b/configs/bcm963178_defconfig
index 1409febae14f..60a198719a35 100644
--- a/configs/bcm963178_defconfig
+++ b/configs/bcm963178_defconfig
@@ -9,7 +9,7 @@ CONFIG_TARGET_BCM963178=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm963178"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm963178"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM63178"
@@ -17,6 +17,15 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96756_defconfig b/configs/bcm96756_defconfig
index 96a9a311037a..4b1fa991a04d 100644
--- a/configs/bcm96756_defconfig
+++ b/configs/bcm96756_defconfig
@@ -9,7 +9,7 @@ CONFIG_TARGET_BCM96756=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96756"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm96756"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6756"
@@ -17,6 +17,15 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96813_defconfig b/configs/bcm96813_defconfig
index eadcb6374c64..553bdc148b28 100644
--- a/configs/bcm96813_defconfig
+++ b/configs/bcm96813_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM96813=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96813"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm96813"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6813"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96855_defconfig b/configs/bcm96855_defconfig
index 6ffae45faa2d..ff6dff0fca63 100644
--- a/configs/bcm96855_defconfig
+++ b/configs/bcm96855_defconfig
@@ -9,7 +9,7 @@ CONFIG_TARGET_BCM96855=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96855"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm96855"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6855"
@@ -17,6 +17,15 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96856_defconfig b/configs/bcm96856_defconfig
index f926b3770f0c..7c6fba29abf6 100644
--- a/configs/bcm96856_defconfig
+++ b/configs/bcm96856_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM96856=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96856"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm96856"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6856"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96858_defconfig b/configs/bcm96858_defconfig
index cc6069fe794f..3e11b4012601 100644
--- a/configs/bcm96858_defconfig
+++ b/configs/bcm96858_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM96858=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96858"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm96858"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6858"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96878_defconfig b/configs/bcm96878_defconfig
index 7d1cd6c944f9..52c869aab9b6 100644
--- a/configs/bcm96878_defconfig
+++ b/configs/bcm96878_defconfig
@@ -9,7 +9,7 @@ CONFIG_TARGET_BCM96878=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96878"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm96878"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6878"
@@ -17,6 +17,15 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
--
2.37.3
next prev parent reply other threads:[~2024-11-13 13:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-13 6:27 [PATCH v2 0/4] Broadcom BCMBCA nand updates david regan
2024-11-13 6:27 ` [PATCH v2 1/4] mtd: nand: brcmnand: remove device specific nand driver files david regan
2024-11-13 6:27 ` david regan [this message]
2024-11-13 6:27 ` [PATCH v2 3/4] mtd: rawnand: brcmnand: Default bcmbca parameter_page_big_endian to zero david regan
2024-11-13 7:53 ` Linus Walleij
2024-11-13 6:27 ` [PATCH v2 4/4] mtd: rawnand: brcmnand: update log level messages david regan
2024-11-13 8:26 ` [PATCH v2 0/4] Broadcom BCMBCA nand updates Michael Nazzareno Trimarchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241113062715.2872-3-dregan@broadcom.com \
--to=dregan@broadcom.com \
--cc=anand.gore@broadcom.com \
--cc=dario.binacchi@amarulasolutions.com \
--cc=dregan@mail.com \
--cc=florian.fainelli@broadcom.com \
--cc=jiaxun.yang@flygoat.com \
--cc=kamal.dasu@broadcom.com \
--cc=kursad.oney@broadcom.com \
--cc=linus.walleij@linaro.org \
--cc=michael@amarulasolutions.com \
--cc=miquel.raynal@bootlin.com \
--cc=philippe.reynes@softathome.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=william.zhang@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.