[PATCH v2 04/22] iio: accel: adxl345: rename to adxl34x_channels

[Lothar Rubusch <l.rubusch@gmail.com>]

Rename the "adxl345_channels" to "adxl34x_channels". The driver
supports several Analog accelerometers equally, e.g. adxl346 and
adxl375.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/iio/accel/adxl345_core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 30896555a4..2b62e79248 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -33,7 +33,7 @@ struct adxl34x_state {
 		BIT(IIO_CHAN_INFO_SAMP_FREQ),				\
 }
 
-static const struct iio_chan_spec adxl345_channels[] = {
+static const struct iio_chan_spec adxl34x_channels[] = {
 	ADXL345_CHANNEL(0, X),
 	ADXL345_CHANNEL(1, Y),
 	ADXL345_CHANNEL(2, Z),
@@ -203,8 +203,8 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	indio_dev->name = st->info->name;
 	indio_dev->info = &adxl345_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels = adxl345_channels;
-	indio_dev->num_channels = ARRAY_SIZE(adxl345_channels);
+	indio_dev->channels = adxl34x_channels;
+	indio_dev->num_channels = ARRAY_SIZE(adxl34x_channels);
 
 	if (setup) {
 		/* Perform optional initial bus specific configuration */
-- 
2.39.5