All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hal Feng <hal.feng@starfivetech.com>
To: Leo <ycliang@andestech.com>, Tom Rini <trini@konsulko.com>,
	Sumit Garg <sumit.garg@linaro.org>,
	Rick Chen <rick@andestech.com>,
	Heinrich Schuchardt <xypron.glpk@gmx.de>,
	H Bell <dmoo_dv@protonmail.com>, E Shattow <lucent@gmail.com>,
	Conor Dooley <conor.dooley@microchip.com>,
	Nam Cao <namcao@linutronix.de>, Bo Gan <ganboing@gmail.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Minda Chen <minda.chen@starfivetech.com>,
	Hal Feng <hal.feng@starfivetech.com>,
	u-boot@lists.denx.de
Subject: [PATCH v6 04/11] riscv: dts: jh7110: Move common code to the new jh7110-common-u-boot.dtsi
Date: Mon, 25 Nov 2024 08:31:58 +0800	[thread overview]
Message-ID: <20241125003205.75327-5-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20241125003205.75327-1-hal.feng@starfivetech.com>

To support JH7110 based boards besides v1.3B,
add a common dtsi and add common code to it.

Tested-by: E Shattow <lucent@gmail.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 arch/riscv/dts/jh7110-common-u-boot.dtsi      | 144 ++++++++++++++++++
 ...10-starfive-visionfive-2-v1.3b-u-boot.dtsi | 140 +----------------
 2 files changed, 145 insertions(+), 139 deletions(-)
 create mode 100644 arch/riscv/dts/jh7110-common-u-boot.dtsi

diff --git a/arch/riscv/dts/jh7110-common-u-boot.dtsi b/arch/riscv/dts/jh7110-common-u-boot.dtsi
new file mode 100644
index 0000000000..c44553455e
--- /dev/null
+++ b/arch/riscv/dts/jh7110-common-u-boot.dtsi
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include "binman.dtsi"
+#include "jh7110-u-boot.dtsi"
+/ {
+	aliases {
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootph-pre-ram;
+	};
+
+	firmware {
+		spi0 = &qspi;
+		bootph-pre-ram;
+	};
+
+	config {
+		bootph-pre-ram;
+		u-boot,spl-payload-offset = <0x100000>;
+	};
+
+	memory@40000000 {
+		bootph-pre-ram;
+	};
+};
+
+&uart0 {
+	bootph-pre-ram;
+	reg-offset = <0>;
+	current-speed = <115200>;
+	clock-frequency = <24000000>;
+};
+
+&mmc0 {
+	bootph-pre-ram;
+	compatible = "snps,dw-mshc";
+};
+
+&mmc1 {
+	bootph-pre-ram;
+	compatible = "snps,dw-mshc";
+};
+
+&qspi {
+	bootph-pre-ram;
+	spi-max-frequency = <250000000>;
+
+	flash@0 {
+		bootph-pre-ram;
+		/delete-property/ cdns,read-delay;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&syscrg {
+	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
+			  <&syscrg JH7110_SYSCLK_BUS_ROOT>,
+			  <&syscrg JH7110_SYSCLK_PERH_ROOT>,
+			  <&syscrg JH7110_SYSCLK_QSPI_REF>;
+	assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>,
+				 <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+				 <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+				 <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>;
+};
+
+&sysgpio {
+	bootph-pre-ram;
+};
+
+&mmc0_pins {
+	bootph-pre-ram;
+	rst-pins {
+		bootph-pre-ram;
+	};
+};
+
+&mmc1_pins {
+	bootph-pre-ram;
+	clk-pins {
+		bootph-pre-ram;
+	};
+
+	mmc-pins {
+		bootph-pre-ram;
+	};
+};
+
+&i2c5_pins {
+	bootph-pre-ram;
+	i2c-pins {
+		bootph-pre-ram;
+	};
+};
+
+&i2c5 {
+	bootph-pre-ram;
+	eeprom@50 {
+		bootph-pre-ram;
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&binman {
+	itb {
+		fit {
+			images {
+				fdt-1 {
+					description = "NAME";
+					load = <0x40400000>;
+					compression = "none";
+
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+				};
+			};
+
+			configurations {
+				conf-1 {
+					fdt = "fdt-1";
+				};
+			};
+		};
+	};
+
+	spl-img {
+		filename = "spl/u-boot-spl.bin.normal.out";
+
+		mkimage {
+			args = "-T sfspl";
+
+			u-boot-spl {
+			};
+		};
+	};
+};
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
index c44553455e..e6bc6630dc 100644
--- a/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
+++ b/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
@@ -3,142 +3,4 @@
  * Copyright (C) 2023 StarFive Technology Co., Ltd.
  */
 
-#include "binman.dtsi"
-#include "jh7110-u-boot.dtsi"
-/ {
-	aliases {
-		spi0 = &qspi;
-	};
-
-	chosen {
-		bootph-pre-ram;
-	};
-
-	firmware {
-		spi0 = &qspi;
-		bootph-pre-ram;
-	};
-
-	config {
-		bootph-pre-ram;
-		u-boot,spl-payload-offset = <0x100000>;
-	};
-
-	memory@40000000 {
-		bootph-pre-ram;
-	};
-};
-
-&uart0 {
-	bootph-pre-ram;
-	reg-offset = <0>;
-	current-speed = <115200>;
-	clock-frequency = <24000000>;
-};
-
-&mmc0 {
-	bootph-pre-ram;
-	compatible = "snps,dw-mshc";
-};
-
-&mmc1 {
-	bootph-pre-ram;
-	compatible = "snps,dw-mshc";
-};
-
-&qspi {
-	bootph-pre-ram;
-	spi-max-frequency = <250000000>;
-
-	flash@0 {
-		bootph-pre-ram;
-		/delete-property/ cdns,read-delay;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&syscrg {
-	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
-			  <&syscrg JH7110_SYSCLK_BUS_ROOT>,
-			  <&syscrg JH7110_SYSCLK_PERH_ROOT>,
-			  <&syscrg JH7110_SYSCLK_QSPI_REF>;
-	assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>,
-				 <&pllclk JH7110_PLLCLK_PLL2_OUT>,
-				 <&pllclk JH7110_PLLCLK_PLL2_OUT>,
-				 <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>;
-	assigned-clock-rates = <0>, <0>, <0>, <0>;
-};
-
-&sysgpio {
-	bootph-pre-ram;
-};
-
-&mmc0_pins {
-	bootph-pre-ram;
-	rst-pins {
-		bootph-pre-ram;
-	};
-};
-
-&mmc1_pins {
-	bootph-pre-ram;
-	clk-pins {
-		bootph-pre-ram;
-	};
-
-	mmc-pins {
-		bootph-pre-ram;
-	};
-};
-
-&i2c5_pins {
-	bootph-pre-ram;
-	i2c-pins {
-		bootph-pre-ram;
-	};
-};
-
-&i2c5 {
-	bootph-pre-ram;
-	eeprom@50 {
-		bootph-pre-ram;
-		compatible = "atmel,24c04";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&binman {
-	itb {
-		fit {
-			images {
-				fdt-1 {
-					description = "NAME";
-					load = <0x40400000>;
-					compression = "none";
-
-					uboot_fdt_blob: blob-ext {
-						filename = "u-boot.dtb";
-					};
-				};
-			};
-
-			configurations {
-				conf-1 {
-					fdt = "fdt-1";
-				};
-			};
-		};
-	};
-
-	spl-img {
-		filename = "spl/u-boot-spl.bin.normal.out";
-
-		mkimage {
-			args = "-T sfspl";
-
-			u-boot-spl {
-			};
-		};
-	};
-};
+#include "jh7110-common-u-boot.dtsi"
-- 
2.43.2


  parent reply	other threads:[~2024-11-25  0:41 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-25  0:31 [PATCH v6 00/11] Support OF_UPSTREAM for StarFive JH7110 Hal Feng
2024-11-25  0:31 ` [PATCH v6 01/11] dts: starfive: Switch to using upstream DT Hal Feng
2024-11-25  0:31 ` [PATCH v6 02/11] riscv: dts: jh7110: Make u-boot device trees adapting to " Hal Feng
2024-11-26 15:14   ` E Shattow
2024-11-25  0:31 ` [PATCH v6 03/11] pcie: starfive: Make the driver compatible with " Hal Feng
2024-11-25  0:31 ` Hal Feng [this message]
2024-11-26 15:24   ` [PATCH v6 04/11] riscv: dts: jh7110: Move common code to the new jh7110-common-u-boot.dtsi E Shattow
2024-11-25  0:31 ` [PATCH v6 05/11] riscv: dts: jh7110: Add u-boot device tree for JH7110 based boards Hal Feng
2024-11-26 13:15   ` E Shattow
2024-11-25  0:32 ` [PATCH v6 06/11] board: starfive: spl: Drop the unneeded DT modification code Hal Feng
2024-11-25  0:32 ` [PATCH v6 07/11] configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT Hal Feng
2024-11-26 14:31   ` E Shattow
2024-11-25  0:32 ` [PATCH v6 08/11] riscv: dts: jh7110: Support multiple DTBs in a Fit image Hal Feng
2024-11-26 14:17   ` E Shattow
2024-11-25  0:32 ` [PATCH v6 09/11] board: starfive: spl: Fix the wrong use of CONFIG_IS_ENABLED() Hal Feng
2024-11-25  0:32 ` [PATCH v6 10/11] board: starfive: spl: Support multiple DTBs for JH7110 based boards Hal Feng
2024-11-25  0:32 ` [PATCH v6 11/11] riscv: cpu: jh7110: Sort the list of imply statements Hal Feng
2024-11-25  8:25 ` [PATCH v6 00/11] Support OF_UPSTREAM for StarFive JH7110 Anand Moon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241125003205.75327-5-hal.feng@starfivetech.com \
    --to=hal.feng@starfivetech.com \
    --cc=conor.dooley@microchip.com \
    --cc=dmoo_dv@protonmail.com \
    --cc=emil.renner.berthing@canonical.com \
    --cc=ganboing@gmail.com \
    --cc=lucent@gmail.com \
    --cc=minda.chen@starfivetech.com \
    --cc=namcao@linutronix.de \
    --cc=rick@andestech.com \
    --cc=sumit.garg@linaro.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=xypron.glpk@gmx.de \
    --cc=ycliang@andestech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.