From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,willy@infradead.org,pedro.falcato@gmail.com,mjguzik@gmail.com,lorenzo.stoakes@oracle.com,Jason@zx2c4.com,hch@infradead.org,david.laight@aculab.com,dan.carpenter@linaro.org,axboe@kernel.dk,arnd@kernel.org,andriy.shevchenko@linux.intel.com,David.Laight@ACULAB.COM,akpm@linux-foundation.org
Subject: + minmaxh-add-whitespace-around-operators-and-after-commas.patch added to mm-nonmm-unstable branch
Date: Fri, 29 Nov 2024 03:11:32 -0800 [thread overview]
Message-ID: <20241129111133.7747EC4CECF@smtp.kernel.org> (raw)
The patch titled
Subject: minmax.h: add whitespace around operators and after commas
has been added to the -mm mm-nonmm-unstable branch. Its filename is
minmaxh-add-whitespace-around-operators-and-after-commas.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/minmaxh-add-whitespace-around-operators-and-after-commas.patch
This patch will later appear in the mm-nonmm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: David Laight <David.Laight@ACULAB.COM>
Subject: minmax.h: add whitespace around operators and after commas
Date: Mon, 18 Nov 2024 19:11:24 +0000
Patch series "minmax.h: Cleanups and minor optimisations".
Some tidyups and minor changes to minmax.h.
This patch (of 7):
Link: https://lkml.kernel.org/r/c50365d214e04f9ba256d417c8bebbc0@AcuMS.aculab.com
Link: https://lkml.kernel.org/r/f04b2e1310244f62826267346fde0553@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/minmax.h | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
--- a/include/linux/minmax.h~minmaxh-add-whitespace-around-operators-and-after-commas
+++ a/include/linux/minmax.h
@@ -51,10 +51,10 @@
* only need to be careful to not cause warnings for
* pointer use.
*/
-#define __signed_type_use(x,ux) (2+__is_nonneg(x,ux))
-#define __unsigned_type_use(x,ux) (1+2*(sizeof(ux)<4))
-#define __sign_use(x,ux) (is_signed_type(typeof(ux))? \
- __signed_type_use(x,ux):__unsigned_type_use(x,ux))
+#define __signed_type_use(x, ux) (2 + __is_nonneg(x, ux))
+#define __unsigned_type_use(x, ux) (1 + 2 * (sizeof(ux) < 4))
+#define __sign_use(x, ux) (is_signed_type(typeof(ux)) ? \
+ __signed_type_use(x, ux) : __unsigned_type_use(x, ux))
/*
* To avoid warnings about casting pointers to integers
@@ -74,15 +74,15 @@
#ifdef CONFIG_64BIT
#define __signed_type(ux) long
#else
- #define __signed_type(ux) typeof(__builtin_choose_expr(sizeof(ux)>4,1LL,1L))
+ #define __signed_type(ux) typeof(__builtin_choose_expr(sizeof(ux) > 4, 1LL, 1L))
#endif
-#define __is_nonneg(x,ux) statically_true((__signed_type(ux))(x)>=0)
+#define __is_nonneg(x, ux) statically_true((__signed_type(ux))(x) >= 0)
-#define __types_ok(x,y,ux,uy) \
- (__sign_use(x,ux) & __sign_use(y,uy))
+#define __types_ok(x, y, ux, uy) \
+ (__sign_use(x, ux) & __sign_use(y, uy))
-#define __types_ok3(x,y,z,ux,uy,uz) \
- (__sign_use(x,ux) & __sign_use(y,uy) & __sign_use(z,uz))
+#define __types_ok3(x, y, z, ux, uy, uz) \
+ (__sign_use(x, ux) & __sign_use(y, uy) & __sign_use(z, uz))
#define __cmp_op_min <
#define __cmp_op_max >
@@ -97,7 +97,7 @@
#define __careful_cmp_once(op, x, y, ux, uy) ({ \
__auto_type ux = (x); __auto_type uy = (y); \
- BUILD_BUG_ON_MSG(!__types_ok(x,y,ux,uy), \
+ BUILD_BUG_ON_MSG(!__types_ok(x, y, ux, uy), \
#op"("#x", "#y") signedness error"); \
__cmp(op, ux, uy); })
@@ -114,7 +114,7 @@
static_assert(__builtin_choose_expr(__is_constexpr((lo) > (hi)), \
(lo) <= (hi), true), \
"clamp() low limit " #lo " greater than high limit " #hi); \
- BUILD_BUG_ON_MSG(!__types_ok3(val,lo,hi,uval,ulo,uhi), \
+ BUILD_BUG_ON_MSG(!__types_ok3(val, lo, hi, uval, ulo, uhi), \
"clamp("#val", "#lo", "#hi") signedness error"); \
__clamp(uval, ulo, uhi); })
@@ -154,7 +154,7 @@
#define __careful_op3(op, x, y, z, ux, uy, uz) ({ \
__auto_type ux = (x); __auto_type uy = (y);__auto_type uz = (z);\
- BUILD_BUG_ON_MSG(!__types_ok3(x,y,z,ux,uy,uz), \
+ BUILD_BUG_ON_MSG(!__types_ok3(x, y, z, ux, uy, uz), \
#op"3("#x", "#y", "#z") signedness error"); \
__cmp(op, ux, __cmp(op, uy, uz)); })
@@ -326,9 +326,9 @@ static inline bool in_range32(u32 val, u
* Use these carefully: no type checking, and uses the arguments
* multiple times. Use for obvious constants only.
*/
-#define MIN(a,b) __cmp(min,a,b)
-#define MAX(a,b) __cmp(max,a,b)
-#define MIN_T(type,a,b) __cmp(min,(type)(a),(type)(b))
-#define MAX_T(type,a,b) __cmp(max,(type)(a),(type)(b))
+#define MIN(a, b) __cmp(min, a, b)
+#define MAX(a, b) __cmp(max, a, b)
+#define MIN_T(type, a, b) __cmp(min, (type)(a), (type)(b))
+#define MAX_T(type, a, b) __cmp(max, (type)(a), (type)(b))
#endif /* _LINUX_MINMAX_H */
_
Patches currently in -mm which might be from David.Laight@ACULAB.COM are
minmaxh-add-whitespace-around-operators-and-after-commas.patch
minmaxh-update-some-comments.patch
minmaxh-reduce-the-define-expansion-of-min-max-and-clamp.patch
minmaxh-use-build_bug_on_msg-for-the-lo-hi-test-in-clamp.patch
minmaxh-move-all-the-clamp-definitions-after-the-min-max-ones.patch
minmaxh-simplify-the-variants-of-clamp.patch
minmaxh-remove-some-defines-that-are-only-expanded-once.patch
reply other threads:[~2024-11-29 11:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241129111133.7747EC4CECF@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=Jason@zx2c4.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@kernel.org \
--cc=axboe@kernel.dk \
--cc=dan.carpenter@linaro.org \
--cc=david.laight@aculab.com \
--cc=hch@infradead.org \
--cc=lorenzo.stoakes@oracle.com \
--cc=mjguzik@gmail.com \
--cc=mm-commits@vger.kernel.org \
--cc=pedro.falcato@gmail.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.