From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] RTC for 6.13
Date: Fri, 29 Nov 2024 22:06:50 +0100 [thread overview]
Message-ID: <2024112921065012cef1c8@mail.local> (raw)
Hello Linus,
Here is the RTC subsystem pull request for 6.12. There are 3 new drivers
this cycle which are the bulk of the additions. Alarm support for
isl12022 is also a fairly large change.
I'm carrying an m68k change that we decide was worth having in this
release alongside the corresponding m48t59 change. It introduces a
somewhat trivial conflict as code has been added after code the patch is
removing. It has been solved properly in linux-next.
The following changes since commit 9852d85ec9d492ebef56dc5f229416c925758edc:
Linux 6.12-rc1 (2024-09-29 15:06:19 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/rtc-6.13
for you to fetch changes up to e0779a0dcf41a6452ac0a169cd96863feb5787c7:
rtc: ab-eoz9: don't fail temperature reads on undervoltage notification (2024-11-25 23:34:12 +0100)
----------------------------------------------------------------
RTC for 6.13
New drivers:
- Amlogic A4 and A5 RTC
- Marvell 88PM886 PMIC RTC
- Renesas RTCA-3 for Renesas RZ/G3S
Drivers:
- ab-eoz9: fix temperature and alarm support
- cmos: improve locking behaviour
- isl12022: add alarm support
- m48t59: improve epoch handling
- mt6359: add range
- rzn1: fix BCD conversions and simplify driver
----------------------------------------------------------------
Alexandre Belloni (4):
dt-bindings: rtc: mpfs-rtc: Properly name file
rtc: amlogic-a4: drop error messages
rtc: rv3028: fix RV3028_TS_COUNT type
rtc: ab-eoz9: fix abeoz9_rtc_read_alarm
Andre Przywara (1):
dt-bindings: rtc: sun6i: Add Allwinner A523 support
AngeloGioacchino Del Regno (2):
rtc: mt6359: Add RTC hardware range and add support for start-year
rtc: mt6359: Use RTC_TC_DOW hardware register for wday
Claudiu Beznea (3):
dt-bindings: rtc: renesas,rzg3s-rtc: Document the Renesas RTCA-3 IP
rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC
rtc: renesas-rtca3: Fix compilation error on RISC-V
Conor Dooley (1):
dt-bindings: rtc: mpfs-rtc: remove Lewis from maintainers
Dmitry Torokhov (1):
rtc: cmos: avoid taking rtc_lock for extended period of time
Esben Haabendal (3):
rtc: isl12022: Prepare for extending rtc device drvdata
rtc: isl12022: Add alarm support
rtc: isl12022: Replace uint8_t types with u8
Finn Thain (2):
rtc: m48t59: Use platform_data struct for year offset value
m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver
Jinjie Ruan (1):
rtc: st-lpc: Use IRQF_NO_AUTOEN flag in request_irq()
Karel Balej (1):
rtc: add driver for Marvell 88PM886 PMIC RTC
Maxime Chevallier (1):
rtc: ab-eoz9: don't fail temperature reads on undervoltage notification
Nobuhiro Iwamatsu (4):
rtc: rtc-mc146818-lib: Use is_leap_year instead of calculate leap years
rtc: abx80x: Fix WDT bit position of the status register
rtc: pcf8563: Sort headers alphabetically
rtc: pcf8563: Switch to regmap
Peng Fan (1):
rtc: bbnsm: add remove hook
Pierre-Henry Moussay (1):
dt-bindings: rtc: mpfs-rtc: Add PIC64GX compatibility
Tóth János (1):
rtc: Makefile: Replace spaces with tab.
Uwe Kleine-König (1):
rtc: Switch back to struct platform_driver::remove()
Wolfram Sang (5):
rtc: rzn1: fix BCD to rtc_time conversion errors
rtc: rzn1: update Michel's email
rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly
rtc: rzn1: drop superfluous wday calculation
rtc: rzn1: reduce register access
Xianwei Zhao (1):
rtc: amlogic-a4: fix compile error
Yiting Deng (3):
dt-bindings: rtc: Add Amlogic A4 and A5 RTC
rtc: support for the Amlogic on-chip RTC
MAINTAINERS: Add an entry for Amlogic RTC driver
Yongliang Gao (1):
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
.../bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 4 +-
.../devicetree/bindings/rtc/amlogic,a4-rtc.yaml | 63 ++
...ochip,mfps-rtc.yaml => microchip,mpfs-rtc.yaml} | 10 +-
.../devicetree/bindings/rtc/renesas,rz-rtca3.yaml | 84 ++
MAINTAINERS | 17 +
arch/m68k/configs/multi_defconfig | 1 +
arch/m68k/configs/mvme147_defconfig | 1 +
arch/m68k/configs/mvme16x_defconfig | 1 +
arch/m68k/include/asm/mvme147hw.h | 19 +-
arch/m68k/include/asm/mvme16xhw.h | 18 +-
arch/m68k/mvme147/config.c | 54 +-
arch/m68k/mvme16x/Makefile | 2 +-
arch/m68k/mvme16x/config.c | 57 +-
arch/m68k/mvme16x/rtc.c | 165 ----
arch/sparc/kernel/time_32.c | 1 +
arch/sparc/kernel/time_64.c | 1 +
drivers/rtc/Kconfig | 33 +
drivers/rtc/Makefile | 5 +-
drivers/rtc/interface.c | 7 +-
drivers/rtc/rtc-88pm80x.c | 2 +-
drivers/rtc/rtc-88pm860x.c | 2 +-
drivers/rtc/rtc-88pm886.c | 97 +++
drivers/rtc/rtc-ab-eoz9.c | 11 +-
drivers/rtc/rtc-ab8500.c | 2 +-
drivers/rtc/rtc-abx80x.c | 2 +-
drivers/rtc/rtc-ac100.c | 2 +-
drivers/rtc/rtc-amlogic-a4.c | 465 +++++++++++
drivers/rtc/rtc-asm9260.c | 2 +-
drivers/rtc/rtc-at91rm9200.c | 2 +-
drivers/rtc/rtc-at91sam9.c | 2 +-
drivers/rtc/rtc-brcmstb-waketimer.c | 3 +-
drivers/rtc/rtc-cadence.c | 2 +-
drivers/rtc/rtc-cmos.c | 39 +-
drivers/rtc/rtc-cros-ec.c | 2 +-
drivers/rtc/rtc-ds1685.c | 2 +-
drivers/rtc/rtc-ftrtc010.c | 2 +-
drivers/rtc/rtc-hid-sensor-time.c | 2 +-
drivers/rtc/rtc-imxdi.c | 2 +-
drivers/rtc/rtc-isl12022.c | 271 ++++++-
drivers/rtc/rtc-loongson.c | 2 +-
drivers/rtc/rtc-lpc24xx.c | 2 +-
drivers/rtc/rtc-m48t59.c | 26 +-
drivers/rtc/rtc-max77686.c | 2 +-
drivers/rtc/rtc-mc13xxx.c | 2 +-
drivers/rtc/rtc-mc146818-lib.c | 6 +-
drivers/rtc/rtc-mpc5121.c | 2 +-
drivers/rtc/rtc-mpfs.c | 2 +-
drivers/rtc/rtc-mt6397.c | 29 +-
drivers/rtc/rtc-mt7622.c | 2 +-
drivers/rtc/rtc-mv.c | 2 +-
drivers/rtc/rtc-mxc_v2.c | 2 +-
drivers/rtc/rtc-nxp-bbnsm.c | 20 +-
drivers/rtc/rtc-omap.c | 2 +-
drivers/rtc/rtc-palmas.c | 2 +-
drivers/rtc/rtc-pcf50633.c | 2 +-
drivers/rtc/rtc-pcf8563.c | 214 ++---
drivers/rtc/rtc-pic32.c | 2 +-
drivers/rtc/rtc-pm8xxx.c | 2 +-
drivers/rtc/rtc-pxa.c | 2 +-
drivers/rtc/rtc-rc5t583.c | 2 +-
drivers/rtc/rtc-renesas-rtca3.c | 900 +++++++++++++++++++++
drivers/rtc/rtc-rtd119x.c | 2 +-
drivers/rtc/rtc-rv3028.c | 6 +-
drivers/rtc/rtc-rzn1.c | 92 +--
drivers/rtc/rtc-s3c.c | 2 +-
drivers/rtc/rtc-sa1100.c | 2 +-
drivers/rtc/rtc-sh.c | 2 +-
drivers/rtc/rtc-spear.c | 2 +-
drivers/rtc/rtc-st-lpc.c | 5 +-
drivers/rtc/rtc-stm32.c | 2 +-
drivers/rtc/rtc-stmp3xxx.c | 2 +-
drivers/rtc/rtc-sunplus.c | 2 +-
drivers/rtc/rtc-tegra.c | 2 +-
drivers/rtc/rtc-tps6586x.c | 2 +-
drivers/rtc/rtc-twl.c | 2 +-
drivers/rtc/rtc-vt8500.c | 2 +-
drivers/rtc/rtc-wm8350.c | 2 +-
drivers/rtc/rtc-xgene.c | 2 +-
drivers/rtc/rtc-zynqmp.c | 2 +-
include/linux/mfd/88pm886.h | 9 +
include/linux/rtc/m48t59.h | 3 +
81 files changed, 2226 insertions(+), 603 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,a4-rtc.yaml
rename Documentation/devicetree/bindings/rtc/{microchip,mfps-rtc.yaml => microchip,mpfs-rtc.yaml} (87%)
create mode 100644 Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml
delete mode 100644 arch/m68k/mvme16x/rtc.c
create mode 100644 drivers/rtc/rtc-88pm886.c
create mode 100644 drivers/rtc/rtc-amlogic-a4.c
create mode 100644 drivers/rtc/rtc-renesas-rtca3.c
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next reply other threads:[~2024-11-29 21:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-29 21:06 Alexandre Belloni [this message]
2024-11-30 19:23 ` [GIT PULL] RTC for 6.13 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024112921065012cef1c8@mail.local \
--to=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.