From: <gregkh@linuxfoundation.org>
To: bsevens@google.com,tiwai@suse.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] ALSA: usb-audio: Fix potential out-of-bound accesses for" failed to apply to 5.4-stable tree
Date: Mon, 02 Dec 2024 12:00:03 +0100 [thread overview]
Message-ID: <2024120202-underling-virtuous-1940@gregkh> (raw)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x b909df18ce2a998afef81d58bbd1a05dc0788c40
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024120202-underling-virtuous-1940@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From b909df18ce2a998afef81d58bbd1a05dc0788c40 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Beno=C3=AEt=20Sevens?= <bsevens@google.com>
Date: Wed, 20 Nov 2024 12:41:44 +0000
Subject: [PATCH] ALSA: usb-audio: Fix potential out-of-bound accesses for
Extigy and Mbox devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
A bogus device can provide a bNumConfigurations value that exceeds the
initial value used in usb_get_configuration for allocating dev->config.
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Link: https://patch.msgid.link/20241120124144.3814457-1-bsevens@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index cbfbb064a9c2..8bc959b60be3 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -555,6 +555,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
{
struct usb_host_config *config = dev->actconfig;
+ struct usb_device_descriptor new_device_descriptor;
int err;
if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
@@ -566,10 +567,14 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac
if (err < 0)
dev_dbg(&dev->dev, "error sending boot message: %d\n", err);
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &dev->descriptor, sizeof(dev->descriptor));
- config = dev->actconfig;
+ &new_device_descriptor, sizeof(new_device_descriptor));
if (err < 0)
dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+ if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+ dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
+ new_device_descriptor.bNumConfigurations);
+ else
+ memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
err = usb_reset_configuration(dev);
if (err < 0)
dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
@@ -901,6 +906,7 @@ static void mbox2_setup_48_24_magic(struct usb_device *dev)
static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
{
struct usb_host_config *config = dev->actconfig;
+ struct usb_device_descriptor new_device_descriptor;
int err;
u8 bootresponse[0x12];
int fwsize;
@@ -936,10 +942,14 @@ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
dev_dbg(&dev->dev, "device initialised!\n");
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &dev->descriptor, sizeof(dev->descriptor));
- config = dev->actconfig;
+ &new_device_descriptor, sizeof(new_device_descriptor));
if (err < 0)
dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+ if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+ dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
+ new_device_descriptor.bNumConfigurations);
+ else
+ memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
err = usb_reset_configuration(dev);
if (err < 0)
@@ -1249,6 +1259,7 @@ static void mbox3_setup_defaults(struct usb_device *dev)
static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
{
struct usb_host_config *config = dev->actconfig;
+ struct usb_device_descriptor new_device_descriptor;
int err;
int descriptor_size;
@@ -1262,10 +1273,14 @@ static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
dev_dbg(&dev->dev, "MBOX3: device initialised!\n");
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &dev->descriptor, sizeof(dev->descriptor));
- config = dev->actconfig;
+ &new_device_descriptor, sizeof(new_device_descriptor));
if (err < 0)
dev_dbg(&dev->dev, "MBOX3: error usb_get_descriptor: %d\n", err);
+ if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+ dev_dbg(&dev->dev, "MBOX3: error too large bNumConfigurations: %d\n",
+ new_device_descriptor.bNumConfigurations);
+ else
+ memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
err = usb_reset_configuration(dev);
if (err < 0)
next reply other threads:[~2024-12-02 11:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-02 11:00 gregkh [this message]
2024-12-02 13:09 ` [PATCH 5.4.y] ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices Benoît Sevens
2024-12-02 16:57 ` Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024120202-underling-virtuous-1940@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=bsevens@google.com \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.