[PATCH net-next v3 00/10] net: freescale: ucc_geth: Phylink conversion

[Maxime Chevallier <maxime.chevallier@bootlin.com>]

Hello everyone,

This is V3 of the phylink conversion for ucc_geth.

The main changes in this V3 are related to error handling in the patches
1 and 10 to report an error when the deprecated "interface" property is
found in DT. Doing so, I found and addressed some issues with the jump
labels in the error paths, impacting patches 1 and 10.

The rest of the changes are just a rebase on net-next.

Some of the V2 changes haven't been reviewed, so I stress out that I'm
still uncertain about the way WoL is handled is patches 4 and 10.

Thanks,

Maxime

Link to V1: https://lore.kernel.org/netdev/20241107170255.1058124-1-maxime.chevallier@bootlin.com/
Link to V2: https://lore.kernel.org/netdev/20241114153603.307872-1-maxime.chevallier@bootlin.com/

Maxime Chevallier (10):
  net: freescale: ucc_geth: Drop support for the "interface" DT property
  net: freescale: ucc_geth: split adjust_link for phylink conversion
  net: freescale: ucc_geth: Use netdev->phydev to access the PHY
  net: freescale: ucc_geth: Fix WOL configuration
  net: freescale: ucc_geth: Use the correct type to store WoL opts
  net: freescale: ucc_geth: Simplify frame length check
  net: freescale: ucc_geth: Hardcode the preamble length to 7 bytes
  net: freescale: ucc_geth: Move the serdes configuration around
  net: freescale: ucc_geth: Introduce a helper to check Reduced modes
  net: freescale: ucc_geth: phylink conversion

 drivers/net/ethernet/freescale/Kconfig        |   3 +-
 drivers/net/ethernet/freescale/ucc_geth.c     | 602 +++++++-----------
 drivers/net/ethernet/freescale/ucc_geth.h     |  22 +-
 .../net/ethernet/freescale/ucc_geth_ethtool.c |  74 +--
 4 files changed, 266 insertions(+), 435 deletions(-)

-- 
2.47.0