From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Xi Ruoyao <xry111@xry111.site>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Sasha Levin <sashal@kernel.org>,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
jiaxun.yang@flygoat.com, davem@davemloft.net,
si.yanteng@linux.dev, devicetree@vger.kernel.org,
linux-mips@vger.kernel.org
Subject: [PATCH AUTOSEL 6.6 08/10] MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a
Date: Wed, 4 Dec 2024 17:18:06 -0500 [thread overview]
Message-ID: <20241204221820.2248367-8-sashal@kernel.org> (raw)
In-Reply-To: <20241204221820.2248367-1-sashal@kernel.org>
From: Xi Ruoyao <xry111@xry111.site>
[ Upstream commit 4fbd66d8254cedfd1218393f39d83b6c07a01917 ]
Fix the dtc warnings:
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on
deprecated #address-cells/#size-cells handling"):
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0
Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0
The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe
port nodes for ls7a"), which has fixed the issue for ls2k (despite its
subject mentions ls7a).
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 73 +++++++++++++++++++----
1 file changed, 60 insertions(+), 13 deletions(-)
diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
index cce9428afc41f..ee71045883e7e 100644
--- a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
@@ -70,7 +70,6 @@ pci@1a000000 {
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <2>;
msi-parent = <&msi>;
reg = <0 0x1a000000 0 0x02000000>,
@@ -234,7 +233,7 @@ phy1: ethernet-phy@1 {
};
};
- pci_bridge@9,0 {
+ pcie@9,0 {
compatible = "pci0014,7a19.1",
"pci0014,7a19",
"pciclass060400",
@@ -244,12 +243,16 @@ pci_bridge@9,0 {
interrupts = <32 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@a,0 {
+ pcie@a,0 {
compatible = "pci0014,7a09.1",
"pci0014,7a09",
"pciclass060400",
@@ -259,12 +262,16 @@ pci_bridge@a,0 {
interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@b,0 {
+ pcie@b,0 {
compatible = "pci0014,7a09.1",
"pci0014,7a09",
"pciclass060400",
@@ -274,12 +281,16 @@ pci_bridge@b,0 {
interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@c,0 {
+ pcie@c,0 {
compatible = "pci0014,7a09.1",
"pci0014,7a09",
"pciclass060400",
@@ -289,12 +300,16 @@ pci_bridge@c,0 {
interrupts = <35 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@d,0 {
+ pcie@d,0 {
compatible = "pci0014,7a19.1",
"pci0014,7a19",
"pciclass060400",
@@ -304,12 +319,16 @@ pci_bridge@d,0 {
interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@e,0 {
+ pcie@e,0 {
compatible = "pci0014,7a09.1",
"pci0014,7a09",
"pciclass060400",
@@ -319,12 +338,16 @@ pci_bridge@e,0 {
interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@f,0 {
+ pcie@f,0 {
compatible = "pci0014,7a29.1",
"pci0014,7a29",
"pciclass060400",
@@ -334,12 +357,16 @@ pci_bridge@f,0 {
interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@10,0 {
+ pcie@10,0 {
compatible = "pci0014,7a19.1",
"pci0014,7a19",
"pciclass060400",
@@ -349,12 +376,16 @@ pci_bridge@10,0 {
interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 41 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@11,0 {
+ pcie@11,0 {
compatible = "pci0014,7a29.1",
"pci0014,7a29",
"pciclass060400",
@@ -364,12 +395,16 @@ pci_bridge@11,0 {
interrupts = <42 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 42 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@12,0 {
+ pcie@12,0 {
compatible = "pci0014,7a19.1",
"pci0014,7a19",
"pciclass060400",
@@ -379,12 +414,16 @@ pci_bridge@12,0 {
interrupts = <43 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 43 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@13,0 {
+ pcie@13,0 {
compatible = "pci0014,7a29.1",
"pci0014,7a29",
"pciclass060400",
@@ -394,12 +433,16 @@ pci_bridge@13,0 {
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 38 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
- pci_bridge@14,0 {
+ pcie@14,0 {
compatible = "pci0014,7a19.1",
"pci0014,7a19",
"pciclass060400",
@@ -409,9 +452,13 @@ pci_bridge@14,0 {
interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &pic 39 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
};
};
--
2.43.0
next prev parent reply other threads:[~2024-12-04 23:30 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-04 22:17 [PATCH AUTOSEL 6.6 01/10] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible Sasha Levin
2024-12-04 22:18 ` [PATCH AUTOSEL 6.6 02/10] usb: chipidea: udc: handle USB Error Interrupt if IOC not set Sasha Levin
2024-12-04 22:18 ` [PATCH AUTOSEL 6.6 03/10] iio: light: ltr501: Add LTER0303 to the supported devices Sasha Levin
2024-12-04 22:18 ` [PATCH AUTOSEL 6.6 04/10] drm: display: Set fwnode for aux bus devices Sasha Levin
2024-12-06 0:05 ` Saravana Kannan
2024-12-04 22:18 ` [PATCH AUTOSEL 6.6 05/10] phy: tegra: xusb: Set fwnode for xusb port devices Sasha Levin
2024-12-04 22:18 ` Sasha Levin
2024-12-06 0:05 ` Saravana Kannan
2024-12-06 0:05 ` Saravana Kannan
2024-12-04 22:18 ` [PATCH AUTOSEL 6.6 06/10] ASoC: amd: yc: fix internal mic on Redmi G 2022 Sasha Levin
2024-12-04 22:18 ` [PATCH AUTOSEL 6.6 07/10] drm/amdgpu/vcn: reset fw_shared when VCPU buffers corrupted on vcn v4.0.3 Sasha Levin
2024-12-04 22:18 ` Sasha Levin [this message]
2024-12-04 22:18 ` [PATCH AUTOSEL 6.6 09/10] ASoC: amd: yc: Add quirk for microphone on Lenovo Thinkpad T14s Gen 6 21M1CTO1WW Sasha Levin
2024-12-04 22:18 ` [PATCH AUTOSEL 6.6 10/10] powerpc/prom_init: Fixup missing powermac #size-cells Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241204221820.2248367-8-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh@kernel.org \
--cc=si.yanteng@linux.dev \
--cc=stable@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
--cc=xry111@xry111.site \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.