From: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
To: "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Jingoo Han" <jingoohan1@gmail.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
konrad.dybcio@oss.qualcomm.com, quic_mrana@quicinc.com,
quic_vbadigan@quicinc.com, Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>,
Krishna chaitanya chundru <quic_krichai@quicinc.com>
Subject: [PATCH v2 2/4] PCI: of: Add API to retrieve equalization presets from device tree
Date: Thu, 12 Dec 2024 16:02:16 +0530 [thread overview]
Message-ID: <20241212-preset_v2-v2-2-210430fbcd8a@oss.qualcomm.com> (raw)
In-Reply-To: <20241212-preset_v2-v2-0-210430fbcd8a@oss.qualcomm.com>
From: Krishna chaitanya chundru <quic_krichai@quicinc.com>
PCIe equalization presets are predefined settings used to optimize
signal integrity by compensating for signal loss and distortion in
high-speed data transmission.
As per PCIe spec 6.0.1 revision section 8.3.3.3 & 4.2.4 for data rates
of 8.0 GT/s, 16.0 GT/s, 32.0 GT/s, and 64.0 GT/s, there is a way to
configure lane equalization presets for each lane to enhance the PCIe
link reliability. Each preset value represents a different combination
of pre-shoot and de-emphasis values. For each data rate, different
registers are defined: for 8.0 GT/s, registers are defined in section
7.7.3.4; for 16.0 GT/s, in section 7.7.5.9, etc. The 8.0 GT/s rate has
an extra receiver preset hint, requiring 16 bits per lane, while the
remaining data rates use 8 bits per lane.
Based on the number of lanes and the supported data rate, this function
reads the device tree property and stores in the presets structure.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
drivers/pci/of.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
drivers/pci/pci.h | 17 +++++++++++++++--
2 files changed, 60 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index dacea3fc5128..99e0e7ae12e9 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -826,3 +826,48 @@ u32 of_pci_get_slot_power_limit(struct device_node *node,
return slot_power_limit_mw;
}
EXPORT_SYMBOL_GPL(of_pci_get_slot_power_limit);
+
+int of_pci_get_equalization_presets(struct device *dev,
+ struct pci_eq_presets *presets,
+ int num_lanes)
+{
+ char name[20];
+ void **preset;
+ void *temp;
+ int ret;
+
+ if (of_property_present(dev->of_node, "eq-presets-8gts")) {
+ presets->eq_presets_8gts = devm_kzalloc(dev, sizeof(u16) * num_lanes, GFP_KERNEL);
+ if (!presets->eq_presets_8gts)
+ return -ENOMEM;
+
+ ret = of_property_read_u16_array(dev->of_node, "eq-presets-8gts",
+ presets->eq_presets_8gts, num_lanes);
+ if (ret) {
+ dev_err(dev, "Error reading eq-presets-8gts %d\n", ret);
+ return ret;
+ }
+ }
+
+ for (int i = 1; i < sizeof(struct pci_eq_presets) / sizeof(void *); i++) {
+ snprintf(name, sizeof(name), "eq-presets-%dgts", 8 << i);
+ if (of_property_present(dev->of_node, name)) {
+ temp = devm_kzalloc(dev, sizeof(u8) * num_lanes, GFP_KERNEL);
+ if (!temp)
+ return -ENOMEM;
+
+ ret = of_property_read_u8_array(dev->of_node, name,
+ temp, num_lanes);
+ if (ret) {
+ dev_err(dev, "Error %s %d\n", name, ret);
+ return ret;
+ }
+
+ preset = (void **)((u8 *)presets + i * sizeof(void *));
+ *preset = temp;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_pci_get_equalization_presets);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 14d00ce45bfa..82362d58bedc 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -731,7 +731,12 @@ static inline u64 pci_rebar_size_to_bytes(int size)
}
struct device_node;
-
+struct pci_eq_presets {
+ void *eq_presets_8gts;
+ void *eq_presets_16gts;
+ void *eq_presets_32gts;
+ void *eq_presets_64gts;
+};
#ifdef CONFIG_OF
int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
int of_get_pci_domain_nr(struct device_node *node);
@@ -746,7 +751,9 @@ void pci_set_bus_of_node(struct pci_bus *bus);
void pci_release_bus_of_node(struct pci_bus *bus);
int devm_of_pci_bridge_init(struct device *dev, struct pci_host_bridge *bridge);
-
+int of_pci_get_equalization_presets(struct device *dev,
+ struct pci_eq_presets *presets,
+ int num_lanes);
#else
static inline int
of_pci_parse_bus_range(struct device_node *node, struct resource *res)
@@ -793,6 +800,12 @@ static inline int devm_of_pci_bridge_init(struct device *dev, struct pci_host_br
return 0;
}
+static inline int of_pci_get_equalization_presets(struct device *dev,
+ struct pci_eq_presets *presets,
+ int num_lanes)
+{
+ return 0;
+}
#endif /* CONFIG_OF */
struct of_changeset;
--
2.34.1
next prev parent reply other threads:[~2024-12-12 10:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-12 10:32 [PATCH v2 0/4] PCI: dwc: Add support for configuring lane equalization presets Krishna Chaitanya Chundru
2024-12-12 10:32 ` [PATCH v2 1/4] arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties Krishna Chaitanya Chundru
2024-12-12 12:25 ` Krzysztof Kozlowski
2024-12-12 12:32 ` Krishna Chaitanya Chundru
2024-12-12 12:37 ` Krzysztof Kozlowski
2024-12-12 10:32 ` Krishna Chaitanya Chundru [this message]
2024-12-12 10:32 ` [PATCH v2 3/4] PCI: dwc: Improve handling of PCIe lane configuration Krishna Chaitanya Chundru
2024-12-12 10:32 ` [PATCH v2 4/4] PCI: dwc: Add support for new pci function op Krishna Chaitanya Chundru
2024-12-12 10:40 ` [PATCH v2 0/4] PCI: dwc: Add support for configuring lane equalization presets Krishna Chaitanya Chundru
2024-12-12 12:26 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241212-preset_v2-v2-2-210430fbcd8a@oss.qualcomm.com \
--to=krishna.chundru@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jingoohan1@gmail.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=quic_krichai@quicinc.com \
--cc=quic_mrana@quicinc.com \
--cc=quic_vbadigan@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.