[PATCH] Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing"

[Chun-Kuang Hu <chunkuang.hu@kernel.org>]

This reverts commit 417d8c47271d5cf1a705e997065873b2a9a36fd4.

With this patch the panel in the Tentacruel ASUS Chromebook CM14
(CM1402F) flickers. There are 1 or 2 times per second a black panel.
Stable Kernel 6.11.5 and mainline 6.12-rc4 works only when reverse
this patch.

Reported-by: Jens Ziller <zillerbaer@gmx.de>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 31 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 33ceeb8d6925..3907863579b9 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -246,23 +246,22 @@ static void mtk_dsi_phy_timconfig(struct mtk_dsi *dsi)
 	u32 data_rate_mhz = DIV_ROUND_UP(dsi->data_rate, HZ_PER_MHZ);
 	struct mtk_phy_timing *timing = &dsi->phy_timing;
 
-	timing->lpx = (80 * data_rate_mhz / (8 * 1000)) + 1;
-	timing->da_hs_prepare = (59 * data_rate_mhz + 4 * 1000) / 8000 + 1;
-	timing->da_hs_zero = (163 * data_rate_mhz + 11 * 1000) / 8000 + 1 -
+	timing->lpx = (60 * data_rate_mhz / (8 * 1000)) + 1;
+	timing->da_hs_prepare = (80 * data_rate_mhz + 4 * 1000) / 8000;
+	timing->da_hs_zero = (170 * data_rate_mhz + 10 * 1000) / 8000 + 1 -
 			     timing->da_hs_prepare;
-	timing->da_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 + 1;
-
-	timing->ta_go = 4 * timing->lpx;
-	timing->ta_sure = 3 * timing->lpx / 2;
-	timing->ta_get = 5 * timing->lpx;
-	timing->da_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
-
-	timing->clk_hs_prepare = (57 * data_rate_mhz / (8 * 1000)) + 1;
-	timing->clk_hs_post = (65 * data_rate_mhz + 53 * 1000) / 8000 + 1;
-	timing->clk_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 + 1;
-	timing->clk_hs_zero = (330 * data_rate_mhz / (8 * 1000)) + 1 -
-			      timing->clk_hs_prepare;
-	timing->clk_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
+	timing->da_hs_trail = timing->da_hs_prepare + 1;
+
+	timing->ta_go = 4 * timing->lpx - 2;
+	timing->ta_sure = timing->lpx + 2;
+	timing->ta_get = 4 * timing->lpx;
+	timing->da_hs_exit = 2 * timing->lpx + 1;
+
+	timing->clk_hs_prepare = 70 * data_rate_mhz / (8 * 1000);
+	timing->clk_hs_post = timing->clk_hs_prepare + 8;
+	timing->clk_hs_trail = timing->clk_hs_prepare;
+	timing->clk_hs_zero = timing->clk_hs_trail * 4;
+	timing->clk_hs_exit = 2 * timing->clk_hs_trail;
 
 	timcon0 = FIELD_PREP(LPX, timing->lpx) |
 		  FIELD_PREP(HS_PREP, timing->da_hs_prepare) |
-- 
2.34.1