From: Yang Chen <yangchen.openbmc@gmail.com>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, andrew@codeconstruct.com.au,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
patrick@stwcx.xyz, amithash@meta.com
Cc: Jerry.Lin@quantatw.com, yang.chen@quantatw.com
Subject: [PATCH v1 2/4] ARM: dts: aspeed: minerva: add i/o expanders on each FCB
Date: Thu, 12 Dec 2024 21:32:24 +0800 [thread overview]
Message-ID: <20241212133226.342937-3-yangchen.openbmc@gmail.com> (raw)
In-Reply-To: <20241212133226.342937-1-yangchen.openbmc@gmail.com>
Add four I/O expanders on each i2c of fan control board (FCB), assign the
GPIO line name to each GPIO in use, and specify the interrupt GPIO number
for each FCB's i/o expander.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
---
.../aspeed/aspeed-bmc-facebook-minerva.dts | 456 ++++++++++++++++++
1 file changed, 456 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
index 426e249c3326..9cd225ae96cb 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -342,6 +342,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R",
+ "P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R",
+ "FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R",
+ "FCB_1_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N",
+ "INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N",
+ "FCB_1_TMP75_ALERT_N", "",
+ "", "",
+ "FAN1_PRSNT", "FAN2_PRSNT",
+ "FAN3_PRSNT", "FAN4_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT",
+ "FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT",
+ "FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT",
+ "FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL",
+ "FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL",
+ "FAN2_POWER_FAIL", "FAN3_POWER_FAIL",
+ "FAN4_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
// FCB 2
imux17: i2c@0 {
@@ -389,6 +465,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R",
+ "P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R",
+ "FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R",
+ "FCB_2_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N",
+ "INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N",
+ "FCB_2_TMP75_ALERT_N", "",
+ "", "",
+ "FAN5_PRSNT", "FAN6_PRSNT",
+ "FAN7_PRSNT", "FAN8_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT",
+ "FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT",
+ "FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT",
+ "FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL",
+ "FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL",
+ "FAN6_POWER_FAIL", "FAN7_POWER_FAIL",
+ "FAN8_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
// FCB 3
imux18: i2c@3 {
@@ -436,6 +588,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R",
+ "P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R",
+ "FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R",
+ "FCB_3_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N",
+ "INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N",
+ "FCB_3_TMP75_ALERT_N", "",
+ "", "",
+ "FAN9_PRSNT", "FAN10_PRSNT",
+ "FAN11_PRSNT", "FAN12_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT",
+ "FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT",
+ "FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT",
+ "FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL",
+ "FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL",
+ "FAN10_POWER_FAIL", "FAN11_POWER_FAIL",
+ "FAN12_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
// FCB 4
imux19: i2c@2 {
@@ -483,6 +711,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R",
+ "P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R",
+ "FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R",
+ "FCB_4_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N",
+ "INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N",
+ "FCB_4_TMP75_ALERT_N", "",
+ "", "",
+ "FAN13_PRSNT", "FAN14_PRSNT",
+ "FAN15_PRSNT", "FAN16_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT",
+ "FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT",
+ "FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT",
+ "FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL",
+ "FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL",
+ "FAN14_POWER_FAIL", "FAN15_POWER_FAIL",
+ "FAN16_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
// FCB 5
imux20: i2c@4 {
@@ -529,6 +833,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R",
+ "P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R",
+ "FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R",
+ "FCB_5_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N",
+ "INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N",
+ "FCB_5_TMP75_ALERT_N", "",
+ "", "",
+ "FAN20_PRSNT", "FAN19_PRSNT",
+ "FAN18_PRSNT", "FAN17_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT",
+ "FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT",
+ "FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT",
+ "FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL",
+ "FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL",
+ "FAN19_POWER_FAIL", "FAN18_POWER_FAIL",
+ "FAN17_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
// FCB 6
imux21: i2c@5 {
@@ -575,6 +955,82 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@11 {
+ compatible = "nxp,pca9555";
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R",
+ "P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R",
+ "FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R",
+ "FCB_6_PWRGD_P3V3_R", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N",
+ "INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N",
+ "FCB_6_TMP75_ALERT_N", "",
+ "", "",
+ "FAN24_PRSNT", "FAN23_PRSNT",
+ "FAN22_PRSNT", "FAN21_PRSNT",
+ "", "",
+ "", "";
+ };
+
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT",
+ "FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT",
+ "FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT",
+ "FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ gpio@17 {
+ compatible = "nxp,pca9555";
+ reg = <0x17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL",
+ "FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL",
+ "FAN23_POWER_FAIL", "FAN22_POWER_FAIL",
+ "FAN21_POWER_FAIL", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
};
imux22: i2c@6 {
--
2.34.1
next prev parent reply other threads:[~2024-12-12 13:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-12 13:32 [PATCH v1 0/4] Revise Meta (Facebook) Minerva BMC Yang Chen
2024-12-12 13:32 ` [PATCH v1 1/4] ARM: dts: aspeed: minerva: add i/o expanders on bus 0 Yang Chen
2024-12-12 13:32 ` Yang Chen [this message]
2024-12-12 13:32 ` [PATCH v1 3/4] ARM: dts: aspeed: minerva: add bmc ready led setting Yang Chen
2024-12-12 13:32 ` [PATCH v1 4/4] ARM: dts: aspeed: minerva: add second source RTC Yang Chen
2024-12-13 5:28 ` [PATCH v1 0/4] Revise Meta (Facebook) Minerva BMC Andrew Jeffery
2024-12-13 11:13 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241212133226.342937-3-yangchen.openbmc@gmail.com \
--to=yangchen.openbmc@gmail.com \
--cc=Jerry.Lin@quantatw.com \
--cc=amithash@meta.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
--cc=yang.chen@quantatw.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.