[PATCH 02/10] lpfc: Restrict the REG_FCFI MAM field to FCoE adapters only

[Justin Tee <justintee8345@gmail.com>]

Qualify setting the REG_FCFI MAM field to FCoE adapters only by keying
off HBA_FCOE_MODE phba->hba_flag.  The field is not applicable to FC
adapters.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_mbox.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index e98f1c2b2220..fb6dbcb86c09 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2524,8 +2524,10 @@ lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
 		bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID);
 
 		/* addr mode is bit wise inverted value of fcf addr_mode */
-		bf_set(lpfc_reg_fcfi_mam, reg_fcfi,
-		       (~phba->fcf.addr_mode) & 0x3);
+		if (test_bit(HBA_FCOE_MODE, &phba->hba_flag)) {
+			bf_set(lpfc_reg_fcfi_mam, reg_fcfi,
+			       (~phba->fcf.addr_mode) & 0x3);
+		}
 	} else {
 		/* This is ONLY for NVMET MRQ == 1 */
 		if (phba->cfg_nvmet_mrq != 1)
-- 
2.38.0