From: vmolnaro@redhat.com
To: linux-perf-users@vger.kernel.org, acme@kernel.org,
acme@redhat.com, namhyung@kernel.org, mpetlan@redhat.com
Cc: irogers@google.com
Subject: [PATCH 03/10] perf test perftool_testsuite: Use absolute paths
Date: Fri, 20 Dec 2024 23:03:27 +0100 [thread overview]
Message-ID: <20241220220334.69198-4-vmolnaro@redhat.com> (raw)
In-Reply-To: <20241220220334.69198-1-vmolnaro@redhat.com>
From: Veronika Molnarova <vmolnaro@redhat.com>
Test cases from perftool_testsuite are affected by the current
directory where the test are run. For this reason, the test
driver has to change the directory to the base_dir for references to
work correctly.
Utilize absolute paths when sourcing and referencing other scripts so
that the current working directory doesn't impact the test cases.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
---
.../base_probe/test_adding_blacklisted.sh | 13 ++---
.../shell/base_probe/test_adding_kernel.sh | 53 ++++++++++---------
.../perf/tests/shell/base_probe/test_basic.sh | 19 +++----
.../shell/base_probe/test_invalid_options.sh | 11 ++--
.../shell/base_probe/test_line_semantics.sh | 7 +--
tools/perf/tests/shell/base_report/setup.sh | 6 ++-
.../tests/shell/base_report/test_basic.sh | 47 ++++++++--------
tools/perf/tests/shell/common/init.sh | 4 +-
8 files changed, 84 insertions(+), 76 deletions(-)
diff --git a/tools/perf/tests/shell/base_probe/test_adding_blacklisted.sh b/tools/perf/tests/shell/base_probe/test_adding_blacklisted.sh
index 45c21673643641b3..b60b0a58361d9ebe 100755
--- a/tools/perf/tests/shell/base_probe/test_adding_blacklisted.sh
+++ b/tools/perf/tests/shell/base_probe/test_adding_blacklisted.sh
@@ -13,11 +13,12 @@
# they must be skipped.
#
-# include working environment
-. ../common/init.sh
-
+DIR_PATH="$(dirname $0)"
TEST_RESULT=0
+# include working environment
+. "$DIR_PATH/../common/init.sh"
+
# skip if not supported
BLACKFUNC_LIST=`head -n 5 /sys/kernel/debug/kprobes/blacklist 2> /dev/null | cut -f2`
if [ -z "$BLACKFUNC_LIST" ]; then
@@ -53,7 +54,7 @@ for BLACKFUNC in $BLACKFUNC_LIST; do
PERF_EXIT_CODE=$?
# check for bad DWARF polluting the result
- ../common/check_all_patterns_found.pl "$REGEX_MISSING_DECL_LINE" >/dev/null < $LOGS_DIR/adding_blacklisted.err
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "$REGEX_MISSING_DECL_LINE" >/dev/null < $LOGS_DIR/adding_blacklisted.err
if [ $? -eq 0 ]; then
SKIP_DWARF=1
@@ -73,7 +74,7 @@ for BLACKFUNC in $BLACKFUNC_LIST; do
fi
fi
else
- ../common/check_all_lines_matched.pl "$REGEX_SKIP_MESSAGE" "$REGEX_NOT_FOUND_MESSAGE" "$REGEX_ERROR_MESSAGE" "$REGEX_SCOPE_FAIL" "$REGEX_INVALID_ARGUMENT" "$REGEX_SYMBOL_FAIL" "$REGEX_OUT_SECTION" < $LOGS_DIR/adding_blacklisted.err
+ "$DIR_PATH/../common/check_all_lines_matched.pl" "$REGEX_SKIP_MESSAGE" "$REGEX_NOT_FOUND_MESSAGE" "$REGEX_ERROR_MESSAGE" "$REGEX_SCOPE_FAIL" "$REGEX_INVALID_ARGUMENT" "$REGEX_SYMBOL_FAIL" "$REGEX_OUT_SECTION" < $LOGS_DIR/adding_blacklisted.err
CHECK_EXIT_CODE=$?
SKIP_DWARF=0
@@ -94,7 +95,7 @@ fi
$CMD_PERF list probe:\* > $LOGS_DIR/adding_blacklisted_list.log
PERF_EXIT_CODE=$?
-../common/check_all_lines_matched.pl "$RE_LINE_EMPTY" "List of pre-defined events" "Metric Groups:" < $LOGS_DIR/adding_blacklisted_list.log
+"$DIR_PATH/../common/check_all_lines_matched.pl" "$RE_LINE_EMPTY" "List of pre-defined events" "Metric Groups:" < $LOGS_DIR/adding_blacklisted_list.log
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "listing blacklisted probe (should NOT be listed)"
diff --git a/tools/perf/tests/shell/base_probe/test_adding_kernel.sh b/tools/perf/tests/shell/base_probe/test_adding_kernel.sh
index 24fe91550c672cc2..5e4a3bf3a1cdaee3 100755
--- a/tools/perf/tests/shell/base_probe/test_adding_kernel.sh
+++ b/tools/perf/tests/shell/base_probe/test_adding_kernel.sh
@@ -13,13 +13,14 @@
# and removing.
#
-# include working environment
-. ../common/init.sh
-
+DIR_PATH="$(dirname $0)"
TEST_RESULT=0
+# include working environment
+. "$DIR_PATH/../common/init.sh"
+
# shellcheck source=lib/probe_vfs_getname.sh
-. "$(dirname "$0")/../lib/probe_vfs_getname.sh"
+. "$DIR_PATH/../lib/probe_vfs_getname.sh"
TEST_PROBE=${TEST_PROBE:-"inode_permission"}
@@ -44,7 +45,7 @@ for opt in "" "-a" "--add"; do
$CMD_PERF probe $opt $TEST_PROBE 2> $LOGS_DIR/adding_kernel_add$opt.err
PERF_EXIT_CODE=$?
- ../common/check_all_patterns_found.pl "Added new events?:" "probe:$TEST_PROBE" "on $TEST_PROBE" < $LOGS_DIR/adding_kernel_add$opt.err
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "Added new events?:" "probe:$TEST_PROBE" "on $TEST_PROBE" < $LOGS_DIR/adding_kernel_add$opt.err
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "adding probe $TEST_PROBE :: $opt"
@@ -58,7 +59,7 @@ done
$CMD_PERF list probe:\* > $LOGS_DIR/adding_kernel_list.log
PERF_EXIT_CODE=$?
-../common/check_all_lines_matched.pl "$RE_LINE_EMPTY" "List of pre-defined events" "probe:${TEST_PROBE}(?:_\d+)?\s+\[Tracepoint event\]" "Metric Groups:" < $LOGS_DIR/adding_kernel_list.log
+"$DIR_PATH/../common/check_all_lines_matched.pl" "$RE_LINE_EMPTY" "List of pre-defined events" "probe:${TEST_PROBE}(?:_\d+)?\s+\[Tracepoint event\]" "Metric Groups:" < $LOGS_DIR/adding_kernel_list.log
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "listing added probe :: perf list"
@@ -71,7 +72,7 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "listing added probe :: perf list
$CMD_PERF probe -l > $LOGS_DIR/adding_kernel_list-l.log
PERF_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "\s*probe:${TEST_PROBE}(?:_\d+)?\s+\(on ${TEST_PROBE}(?:[:\+]$RE_NUMBER_HEX)?@.+\)" < $LOGS_DIR/adding_kernel_list-l.log
+"$DIR_PATH/../common/check_all_patterns_found.pl" "\s*probe:${TEST_PROBE}(?:_\d+)?\s+\(on ${TEST_PROBE}(?:[:\+]$RE_NUMBER_HEX)?@.+\)" < $LOGS_DIR/adding_kernel_list-l.log
CHECK_EXIT_CODE=$?
if [ $NO_DEBUGINFO ] ; then
@@ -93,9 +94,9 @@ REGEX_STAT_VALUES="\s*\d+\s+probe:$TEST_PROBE"
# the value should be greater than 1
REGEX_STAT_VALUE_NONZERO="\s*[1-9][0-9]*\s+probe:$TEST_PROBE"
REGEX_STAT_TIME="\s*$RE_NUMBER\s+seconds (?:time elapsed|user|sys)"
-../common/check_all_lines_matched.pl "$REGEX_STAT_HEADER" "$REGEX_STAT_VALUES" "$REGEX_STAT_TIME" "$RE_LINE_COMMENT" "$RE_LINE_EMPTY" < $LOGS_DIR/adding_kernel_using_probe.log
+"$DIR_PATH/../common/check_all_lines_matched.pl" "$REGEX_STAT_HEADER" "$REGEX_STAT_VALUES" "$REGEX_STAT_TIME" "$RE_LINE_COMMENT" "$RE_LINE_EMPTY" < $LOGS_DIR/adding_kernel_using_probe.log
CHECK_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "$REGEX_STAT_HEADER" "$REGEX_STAT_VALUE_NONZERO" "$REGEX_STAT_TIME" < $LOGS_DIR/adding_kernel_using_probe.log
+"$DIR_PATH/../common/check_all_patterns_found.pl" "$REGEX_STAT_HEADER" "$REGEX_STAT_VALUE_NONZERO" "$REGEX_STAT_TIME" < $LOGS_DIR/adding_kernel_using_probe.log
(( CHECK_EXIT_CODE += $? ))
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "using added probe"
@@ -108,7 +109,7 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "using added probe"
$CMD_PERF probe -d $TEST_PROBE\* 2> $LOGS_DIR/adding_kernel_removing.err
PERF_EXIT_CODE=$?
-../common/check_all_lines_matched.pl "Removed event: probe:$TEST_PROBE" < $LOGS_DIR/adding_kernel_removing.err
+"$DIR_PATH/../common/check_all_lines_matched.pl" "Removed event: probe:$TEST_PROBE" < $LOGS_DIR/adding_kernel_removing.err
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "deleting added probe"
@@ -121,7 +122,7 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "deleting added probe"
$CMD_PERF list probe:\* > $LOGS_DIR/adding_kernel_list_removed.log
PERF_EXIT_CODE=$?
-../common/check_all_lines_matched.pl "$RE_LINE_EMPTY" "List of pre-defined events" "Metric Groups:" < $LOGS_DIR/adding_kernel_list_removed.log
+"$DIR_PATH/../common/check_all_lines_matched.pl" "$RE_LINE_EMPTY" "List of pre-defined events" "Metric Groups:" < $LOGS_DIR/adding_kernel_list_removed.log
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "listing removed probe (should NOT be listed)"
@@ -135,7 +136,7 @@ $CMD_PERF probe -n --add $TEST_PROBE 2> $LOGS_DIR/adding_kernel_dryrun.err
PERF_EXIT_CODE=$?
# check for the output (should be the same as usual)
-../common/check_all_patterns_found.pl "Added new events?:" "probe:$TEST_PROBE" "on $TEST_PROBE" < $LOGS_DIR/adding_kernel_dryrun.err
+"$DIR_PATH/../common/check_all_patterns_found.pl" "Added new events?:" "probe:$TEST_PROBE" "on $TEST_PROBE" < $LOGS_DIR/adding_kernel_dryrun.err
CHECK_EXIT_CODE=$?
# check that no probe was added in real
@@ -152,7 +153,7 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "dry run :: adding probe"
$CMD_PERF probe --add $TEST_PROBE 2> $LOGS_DIR/adding_kernel_forceadd_01.err
PERF_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "Added new events?:" "probe:$TEST_PROBE" "on $TEST_PROBE" < $LOGS_DIR/adding_kernel_forceadd_01.err
+"$DIR_PATH/../common/check_all_patterns_found.pl" "Added new events?:" "probe:$TEST_PROBE" "on $TEST_PROBE" < $LOGS_DIR/adding_kernel_forceadd_01.err
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "force-adding probes :: first probe adding"
@@ -162,7 +163,7 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "force-adding probes :: first pro
! $CMD_PERF probe --add $TEST_PROBE 2> $LOGS_DIR/adding_kernel_forceadd_02.err
PERF_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "Error: event \"$TEST_PROBE\" already exists." "Error: Failed to add events." < $LOGS_DIR/adding_kernel_forceadd_02.err
+"$DIR_PATH/../common/check_all_patterns_found.pl" "Error: event \"$TEST_PROBE\" already exists." "Error: Failed to add events." < $LOGS_DIR/adding_kernel_forceadd_02.err
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "force-adding probes :: second probe adding (without force)"
@@ -173,7 +174,7 @@ NO_OF_PROBES=`$CMD_PERF probe -l | wc -l`
$CMD_PERF probe --force --add $TEST_PROBE 2> $LOGS_DIR/adding_kernel_forceadd_03.err
PERF_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "Added new events?:" "probe:${TEST_PROBE}_${NO_OF_PROBES}" "on $TEST_PROBE" < $LOGS_DIR/adding_kernel_forceadd_03.err
+"$DIR_PATH/../common/check_all_patterns_found.pl" "Added new events?:" "probe:${TEST_PROBE}_${NO_OF_PROBES}" "on $TEST_PROBE" < $LOGS_DIR/adding_kernel_forceadd_03.err
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "force-adding probes :: second probe adding (with force)"
@@ -187,7 +188,7 @@ $CMD_PERF stat -e probe:$TEST_PROBE -e probe:${TEST_PROBE}_${NO_OF_PROBES} -x';'
PERF_EXIT_CODE=$?
REGEX_LINE="$RE_NUMBER;+probe:${TEST_PROBE}_?(?:$NO_OF_PROBES)?;$RE_NUMBER;$RE_NUMBER"
-../common/check_all_lines_matched.pl "$REGEX_LINE" "$RE_LINE_EMPTY" "$RE_LINE_COMMENT" < $LOGS_DIR/adding_kernel_using_two.log
+"$DIR_PATH/../common/check_all_lines_matched.pl" "$REGEX_LINE" "$RE_LINE_EMPTY" "$RE_LINE_COMMENT" < $LOGS_DIR/adding_kernel_using_two.log
CHECK_EXIT_CODE=$?
VALUE_1=`grep "$TEST_PROBE;" $LOGS_DIR/adding_kernel_using_two.log | awk -F';' '{print $1}'`
@@ -205,7 +206,7 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "using doubled probe"
$CMD_PERF probe --del \* 2> $LOGS_DIR/adding_kernel_removing_wildcard.err
PERF_EXIT_CODE=$?
-../common/check_all_lines_matched.pl "Removed event: probe:$TEST_PROBE" "Removed event: probe:${TEST_PROBE}_1" < $LOGS_DIR/adding_kernel_removing_wildcard.err
+"$DIR_PATH/../common/check_all_lines_matched.pl" "Removed event: probe:$TEST_PROBE" "Removed event: probe:${TEST_PROBE}_1" < $LOGS_DIR/adding_kernel_removing_wildcard.err
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "removing multiple probes"
@@ -217,7 +218,7 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "removing multiple probes"
$CMD_PERF probe -nf --max-probes=512 -a 'vfs_* $params' 2> $LOGS_DIR/adding_kernel_adding_wildcard.err
PERF_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "probe:vfs_mknod" "probe:vfs_create" "probe:vfs_rmdir" "probe:vfs_link" "probe:vfs_write" < $LOGS_DIR/adding_kernel_adding_wildcard.err
+"$DIR_PATH/../common/check_all_patterns_found.pl" "probe:vfs_mknod" "probe:vfs_create" "probe:vfs_rmdir" "probe:vfs_link" "probe:vfs_write" < $LOGS_DIR/adding_kernel_adding_wildcard.err
CHECK_EXIT_CODE=$?
if [ $NO_DEBUGINFO ] ; then
@@ -240,13 +241,13 @@ test $PERF_EXIT_CODE -ne 139 -a $PERF_EXIT_CODE -ne 0
PERF_EXIT_CODE=$?
# check that the error message is reasonable
-../common/check_all_patterns_found.pl "Failed to find" "somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64" < $LOGS_DIR/adding_kernel_nonexisting.err
+"$DIR_PATH/../common/check_all_patterns_found.pl" "Failed to find" "somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64" < $LOGS_DIR/adding_kernel_nonexisting.err
CHECK_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "in this function|at this address" "Error" "Failed to add events" < $LOGS_DIR/adding_kernel_nonexisting.err
+"$DIR_PATH/../common/check_all_patterns_found.pl" "in this function|at this address" "Error" "Failed to add events" < $LOGS_DIR/adding_kernel_nonexisting.err
(( CHECK_EXIT_CODE += $? ))
-../common/check_all_lines_matched.pl "Failed to find" "Error" "Probe point .+ not found" "optimized out" "Use.+\-\-range option to show.+location range" < $LOGS_DIR/adding_kernel_nonexisting.err
+"$DIR_PATH/../common/check_all_lines_matched.pl" "Failed to find" "Error" "Probe point .+ not found" "optimized out" "Use.+\-\-range option to show.+location range" < $LOGS_DIR/adding_kernel_nonexisting.err
(( CHECK_EXIT_CODE += $? ))
-../common/check_no_patterns_found.pl "$RE_SEGFAULT" < $LOGS_DIR/adding_kernel_nonexisting.err
+"$DIR_PATH/../common/check_no_patterns_found.pl" "$RE_SEGFAULT" < $LOGS_DIR/adding_kernel_nonexisting.err
(( CHECK_EXIT_CODE += $? ))
if [ $NO_DEBUGINFO ]; then
@@ -264,7 +265,7 @@ fi
$CMD_PERF probe --add "$TEST_PROBE%return \$retval" 2> $LOGS_DIR/adding_kernel_func_retval_add.err
PERF_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "Added new events?:" "probe:$TEST_PROBE" "on $TEST_PROBE%return with \\\$retval" < $LOGS_DIR/adding_kernel_func_retval_add.err
+"$DIR_PATH/../common/check_all_patterns_found.pl" "Added new events?:" "probe:$TEST_PROBE" "on $TEST_PROBE%return with \\\$retval" < $LOGS_DIR/adding_kernel_func_retval_add.err
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "function with retval :: add"
@@ -274,7 +275,7 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "function with retval :: add"
$CMD_PERF record -e probe:$TEST_PROBE\* -o $CURRENT_TEST_DIR/perf.data -- cat /proc/cpuinfo > /dev/null 2> $LOGS_DIR/adding_kernel_func_retval_record.err
PERF_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "$RE_LINE_RECORD1" "$RE_LINE_RECORD2" < $LOGS_DIR/adding_kernel_func_retval_record.err
+"$DIR_PATH/../common/check_all_patterns_found.pl" "$RE_LINE_RECORD1" "$RE_LINE_RECORD2" < $LOGS_DIR/adding_kernel_func_retval_record.err
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "function with retval :: record"
@@ -285,9 +286,9 @@ $CMD_PERF script -i $CURRENT_TEST_DIR/perf.data > $LOGS_DIR/adding_kernel_func_r
PERF_EXIT_CODE=$?
REGEX_SCRIPT_LINE="\s*cat\s+$RE_NUMBER\s+\[$RE_NUMBER\]\s+$RE_NUMBER:\s+probe:$TEST_PROBE\w*:\s+\($RE_NUMBER_HEX\s+<\-\s+$RE_NUMBER_HEX\)\s+arg1=$RE_NUMBER_HEX"
-../common/check_all_lines_matched.pl "$REGEX_SCRIPT_LINE" < $LOGS_DIR/adding_kernel_func_retval_script.log
+"$DIR_PATH/../common/check_all_lines_matched.pl" "$REGEX_SCRIPT_LINE" < $LOGS_DIR/adding_kernel_func_retval_script.log
CHECK_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "$REGEX_SCRIPT_LINE" < $LOGS_DIR/adding_kernel_func_retval_script.log
+"$DIR_PATH/../common/check_all_patterns_found.pl" "$REGEX_SCRIPT_LINE" < $LOGS_DIR/adding_kernel_func_retval_script.log
(( CHECK_EXIT_CODE += $? ))
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "function argument probing :: script"
diff --git a/tools/perf/tests/shell/base_probe/test_basic.sh b/tools/perf/tests/shell/base_probe/test_basic.sh
index 9d8b5afbeddda268..e8fed67be9c1a8ee 100755
--- a/tools/perf/tests/shell/base_probe/test_basic.sh
+++ b/tools/perf/tests/shell/base_probe/test_basic.sh
@@ -12,11 +12,12 @@
# This test tests basic functionality of perf probe command.
#
-# include working environment
-. ../common/init.sh
-
+DIR_PATH="$(dirname $0)"
TEST_RESULT=0
+# include working environment
+. "$DIR_PATH/../common/init.sh"
+
if ! check_kprobes_available; then
print_overall_skipped
exit 2
@@ -30,15 +31,15 @@ if [ "$PARAM_GENERAL_HELP_TEXT_CHECK" = "y" ]; then
$CMD_PERF probe --help > $LOGS_DIR/basic_helpmsg.log 2> $LOGS_DIR/basic_helpmsg.err
PERF_EXIT_CODE=$?
- ../common/check_all_patterns_found.pl "PERF-PROBE" "NAME" "SYNOPSIS" "DESCRIPTION" "OPTIONS" "PROBE\s+SYNTAX" "PROBE\s+ARGUMENT" "LINE\s+SYNTAX" < $LOGS_DIR/basic_helpmsg.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "PERF-PROBE" "NAME" "SYNOPSIS" "DESCRIPTION" "OPTIONS" "PROBE\s+SYNTAX" "PROBE\s+ARGUMENT" "LINE\s+SYNTAX" < $LOGS_DIR/basic_helpmsg.log
CHECK_EXIT_CODE=$?
- ../common/check_all_patterns_found.pl "LAZY\s+MATCHING" "FILTER\s+PATTERN" "EXAMPLES" "SEE\s+ALSO" < $LOGS_DIR/basic_helpmsg.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "LAZY\s+MATCHING" "FILTER\s+PATTERN" "EXAMPLES" "SEE\s+ALSO" < $LOGS_DIR/basic_helpmsg.log
(( CHECK_EXIT_CODE += $? ))
- ../common/check_all_patterns_found.pl "vmlinux" "module=" "source=" "verbose" "quiet" "add=" "del=" "list.*EVENT" "line=" "vars=" "externs" < $LOGS_DIR/basic_helpmsg.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "vmlinux" "module=" "source=" "verbose" "quiet" "add=" "del=" "list.*EVENT" "line=" "vars=" "externs" < $LOGS_DIR/basic_helpmsg.log
(( CHECK_EXIT_CODE += $? ))
- ../common/check_all_patterns_found.pl "no-inlines" "funcs.*FILTER" "filter=FILTER" "force" "dry-run" "max-probes" "exec=" "demangle-kernel" < $LOGS_DIR/basic_helpmsg.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "no-inlines" "funcs.*FILTER" "filter=FILTER" "force" "dry-run" "max-probes" "exec=" "demangle-kernel" < $LOGS_DIR/basic_helpmsg.log
(( CHECK_EXIT_CODE += $? ))
- ../common/check_no_patterns_found.pl "No manual entry for" < $LOGS_DIR/basic_helpmsg.err
+ "$DIR_PATH/../common/check_no_patterns_found.pl" "No manual entry for" < $LOGS_DIR/basic_helpmsg.err
(( CHECK_EXIT_CODE += $? ))
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "help message"
@@ -53,7 +54,7 @@ fi
# without any args perf-probe should print usage
$CMD_PERF probe 2> $LOGS_DIR/basic_usage.log > /dev/null
-../common/check_all_patterns_found.pl "[Uu]sage" "perf probe" "verbose" "quiet" "add" "del" "force" "line" "vars" "externs" "range" < $LOGS_DIR/basic_usage.log
+"$DIR_PATH/../common/check_all_patterns_found.pl" "[Uu]sage" "perf probe" "verbose" "quiet" "add" "del" "force" "line" "vars" "externs" "range" < $LOGS_DIR/basic_usage.log
CHECK_EXIT_CODE=$?
print_results 0 $CHECK_EXIT_CODE "usage message"
diff --git a/tools/perf/tests/shell/base_probe/test_invalid_options.sh b/tools/perf/tests/shell/base_probe/test_invalid_options.sh
index 59757a00e6d3e40a..b56c64a1f3619e4a 100755
--- a/tools/perf/tests/shell/base_probe/test_invalid_options.sh
+++ b/tools/perf/tests/shell/base_probe/test_invalid_options.sh
@@ -12,11 +12,12 @@
# This test checks whether the invalid and incompatible options are reported
#
-# include working environment
-. ../common/init.sh
-
+DIR_PATH="$(dirname $0)"
TEST_RESULT=0
+# include working environment
+. "$DIR_PATH/../common/init.sh"
+
if ! check_kprobes_available; then
print_overall_skipped
exit 2
@@ -30,7 +31,7 @@ for opt in '-a' '-d' '-L' '-V'; do
! $CMD_PERF probe $opt 2> $LOGS_DIR/invalid_options_missing_argument$opt.err
PERF_EXIT_CODE=$?
- ../common/check_all_patterns_found.pl "Error: switch .* requires a value" < $LOGS_DIR/invalid_options_missing_argument$opt.err
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "Error: switch .* requires a value" < $LOGS_DIR/invalid_options_missing_argument$opt.err
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "missing argument for $opt"
@@ -63,7 +64,7 @@ for opt in '-a xxx -d xxx' '-a xxx -L foo' '-a xxx -V foo' '-a xxx -l' '-a xxx -
! $CMD_PERF probe $opt > /dev/null 2> $LOGS_DIR/aux.log
PERF_EXIT_CODE=$?
- ../common/check_all_patterns_found.pl "Error: switch .+ cannot be used with switch .+" < $LOGS_DIR/aux.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "Error: switch .+ cannot be used with switch .+" < $LOGS_DIR/aux.log
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "mutually exclusive options :: $opt"
diff --git a/tools/perf/tests/shell/base_probe/test_line_semantics.sh b/tools/perf/tests/shell/base_probe/test_line_semantics.sh
index da8999be4604e9d6..2a805b7a18b03315 100755
--- a/tools/perf/tests/shell/base_probe/test_line_semantics.sh
+++ b/tools/perf/tests/shell/base_probe/test_line_semantics.sh
@@ -13,11 +13,12 @@
# arguments are properly reported.
#
-# include working environment
-. ../common/init.sh
-
+DIR_PATH="$(dirname $0)"
TEST_RESULT=0
+# include working environment
+. "$DIR_PATH/../common/init.sh"
+
if ! check_kprobes_available; then
print_overall_skipped
exit 2
diff --git a/tools/perf/tests/shell/base_report/setup.sh b/tools/perf/tests/shell/base_report/setup.sh
index b03501b2e8fc5330..386e947d1c8bcda2 100755
--- a/tools/perf/tests/shell/base_report/setup.sh
+++ b/tools/perf/tests/shell/base_report/setup.sh
@@ -12,8 +12,10 @@
#
#
+DIR_PATH="$(dirname $0)"
+
# include working environment
-. ../common/init.sh
+. "$DIR_PATH/../common/init.sh"
test -d "$HEADER_TAR_DIR" || mkdir -p "$HEADER_TAR_DIR"
@@ -22,7 +24,7 @@ SW_EVENT="cpu-clock"
$CMD_PERF record -asdg -e $SW_EVENT -o $CURRENT_TEST_DIR/perf.data -- $CMD_LONGER_SLEEP 2> $LOGS_DIR/setup.log
PERF_EXIT_CODE=$?
-../common/check_all_patterns_found.pl "$RE_LINE_RECORD1" "$RE_LINE_RECORD2" < $LOGS_DIR/setup.log
+"$DIR_PATH/../common/check_all_patterns_found.pl" "$RE_LINE_RECORD1" "$RE_LINE_RECORD2" < $LOGS_DIR/setup.log
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "prepare the perf.data file"
diff --git a/tools/perf/tests/shell/base_report/test_basic.sh b/tools/perf/tests/shell/base_report/test_basic.sh
index 2398eba4d3fdd3db..4e931587f6ed9dfa 100755
--- a/tools/perf/tests/shell/base_report/test_basic.sh
+++ b/tools/perf/tests/shell/base_report/test_basic.sh
@@ -12,11 +12,12 @@
#
#
-# include working environment
-. ../common/init.sh
-
+DIR_PATH="$(dirname $0)"
TEST_RESULT=0
+# include working environment
+. "$DIR_PATH/../common/init.sh"
+
### help message
@@ -25,19 +26,19 @@ if [ "$PARAM_GENERAL_HELP_TEXT_CHECK" = "y" ]; then
$CMD_PERF report --help > $LOGS_DIR/basic_helpmsg.log 2> $LOGS_DIR/basic_helpmsg.err
PERF_EXIT_CODE=$?
- ../common/check_all_patterns_found.pl "PERF-REPORT" "NAME" "SYNOPSIS" "DESCRIPTION" "OPTIONS" "OVERHEAD\s+CALCULATION" "SEE ALSO" < $LOGS_DIR/basic_helpmsg.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "PERF-REPORT" "NAME" "SYNOPSIS" "DESCRIPTION" "OPTIONS" "OVERHEAD\s+CALCULATION" "SEE ALSO" < $LOGS_DIR/basic_helpmsg.log
CHECK_EXIT_CODE=$?
- ../common/check_all_patterns_found.pl "input" "verbose" "show-nr-samples" "show-cpu-utilization" "threads" "comms" "pid" "tid" "dsos" "symbols" "symbol-filter" < $LOGS_DIR/basic_helpmsg.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "input" "verbose" "show-nr-samples" "show-cpu-utilization" "threads" "comms" "pid" "tid" "dsos" "symbols" "symbol-filter" < $LOGS_DIR/basic_helpmsg.log
(( CHECK_EXIT_CODE += $? ))
- ../common/check_all_patterns_found.pl "hide-unresolved" "sort" "fields" "parent" "exclude-other" "column-widths" "field-separator" "dump-raw-trace" "children" < $LOGS_DIR/basic_helpmsg.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "hide-unresolved" "sort" "fields" "parent" "exclude-other" "column-widths" "field-separator" "dump-raw-trace" "children" < $LOGS_DIR/basic_helpmsg.log
(( CHECK_EXIT_CODE += $? ))
- ../common/check_all_patterns_found.pl "call-graph" "max-stack" "inverted" "ignore-callees" "pretty" "stdio" "tui" "gtk" "vmlinux" "kallsyms" "modules" < $LOGS_DIR/basic_helpmsg.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "call-graph" "max-stack" "inverted" "ignore-callees" "pretty" "stdio" "tui" "gtk" "vmlinux" "kallsyms" "modules" < $LOGS_DIR/basic_helpmsg.log
(( CHECK_EXIT_CODE += $? ))
- ../common/check_all_patterns_found.pl "force" "symfs" "cpu" "disassembler-style" "source" "asm-raw" "show-total-period" "show-info" "branch-stack" "group" < $LOGS_DIR/basic_helpmsg.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "force" "symfs" "cpu" "disassembler-style" "source" "asm-raw" "show-total-period" "show-info" "branch-stack" "group" < $LOGS_DIR/basic_helpmsg.log
(( CHECK_EXIT_CODE += $? ))
- ../common/check_all_patterns_found.pl "branch-history" "objdump" "demangle" "percent-limit" "percentage" "header" "itrace" "full-source-path" "show-ref-call-graph" < $LOGS_DIR/basic_helpmsg.log
+ "$DIR_PATH/../common/check_all_patterns_found.pl" "branch-history" "objdump" "demangle" "percent-limit" "percentage" "header" "itrace" "full-source-path" "show-ref-call-graph" < $LOGS_DIR/basic_helpmsg.log
(( CHECK_EXIT_CODE += $? ))
- ../common/check_no_patterns_found.pl "No manual entry for" < $LOGS_DIR/basic_helpmsg.err
+ "$DIR_PATH/../common/check_no_patterns_found.pl" "No manual entry for" < $LOGS_DIR/basic_helpmsg.err
(( CHECK_EXIT_CODE += $? ))
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "help message"
@@ -57,9 +58,9 @@ REGEX_LOST_SAMPLES_INFO="#\s*Total Lost Samples:\s+$RE_NUMBER"
REGEX_SAMPLES_INFO="#\s*Samples:\s+(?:$RE_NUMBER)\w?\s+of\s+event\s+'$RE_EVENT_ANY'"
REGEX_LINES_HEADER="#\s*Children\s+Self\s+Command\s+Shared Object\s+Symbol"
REGEX_LINES="\s*$RE_NUMBER%\s+$RE_NUMBER%\s+\S+\s+\[kernel\.(?:vmlinux)|(?:kallsyms)\]\s+\[[k\.]\]\s+\w+"
-../common/check_all_patterns_found.pl "$REGEX_LOST_SAMPLES_INFO" "$REGEX_SAMPLES_INFO" "$REGEX_LINES_HEADER" "$REGEX_LINES" < $LOGS_DIR/basic_basic.log
+"$DIR_PATH/../common/check_all_patterns_found.pl" "$REGEX_LOST_SAMPLES_INFO" "$REGEX_SAMPLES_INFO" "$REGEX_LINES_HEADER" "$REGEX_LINES" < $LOGS_DIR/basic_basic.log
CHECK_EXIT_CODE=$?
-../common/check_errors_whitelisted.pl "stderr-whitelist.txt" < $LOGS_DIR/basic_basic.err
+"$DIR_PATH/../common/check_errors_whitelisted.pl" "$DIR_PATH/stderr-whitelist.txt" < $LOGS_DIR/basic_basic.err
(( CHECK_EXIT_CODE += $? ))
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "basic execution"
@@ -74,9 +75,9 @@ PERF_EXIT_CODE=$?
REGEX_LINES_HEADER="#\s*Children\s+Self\s+Samples\s+Command\s+Shared Object\s+Symbol"
REGEX_LINES="\s*$RE_NUMBER%\s+$RE_NUMBER%\s+$RE_NUMBER\s+\S+\s+\[kernel\.(?:vmlinux)|(?:kallsyms)\]\s+\[[k\.]\]\s+\w+"
-../common/check_all_patterns_found.pl "$REGEX_LINES_HEADER" "$REGEX_LINES" < $LOGS_DIR/basic_nrsamples.log
+"$DIR_PATH/../common/check_all_patterns_found.pl" "$REGEX_LINES_HEADER" "$REGEX_LINES" < $LOGS_DIR/basic_nrsamples.log
CHECK_EXIT_CODE=$?
-../common/check_errors_whitelisted.pl "stderr-whitelist.txt" < $LOGS_DIR/basic_nrsamples.err
+"$DIR_PATH/../common/check_errors_whitelisted.pl" "$DIR_PATH/stderr-whitelist.txt" < $LOGS_DIR/basic_nrsamples.err
(( CHECK_EXIT_CODE += $? ))
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "number of samples"
@@ -98,7 +99,7 @@ REGEX_LINE_CPUS_ONLINE="#\s+nrcpus online\s*:\s*$MY_CPUS_ONLINE"
REGEX_LINE_CPUS_AVAIL="#\s+nrcpus avail\s*:\s*$MY_CPUS_AVAILABLE"
# disable precise check for "nrcpus avail" in BASIC runmode
test $PERFTOOL_TESTSUITE_RUNMODE -lt $RUNMODE_STANDARD && REGEX_LINE_CPUS_AVAIL="#\s+nrcpus avail\s*:\s*$RE_NUMBER"
-../common/check_all_patterns_found.pl "$REGEX_LINE_TIMESTAMP" "$REGEX_LINE_HOSTNAME" "$REGEX_LINE_KERNEL" "$REGEX_LINE_PERF" "$REGEX_LINE_ARCH" "$REGEX_LINE_CPUS_ONLINE" "$REGEX_LINE_CPUS_AVAIL" < $LOGS_DIR/basic_header.log
+"$DIR_PATH/../common/check_all_patterns_found.pl" "$REGEX_LINE_TIMESTAMP" "$REGEX_LINE_HOSTNAME" "$REGEX_LINE_KERNEL" "$REGEX_LINE_PERF" "$REGEX_LINE_ARCH" "$REGEX_LINE_CPUS_ONLINE" "$REGEX_LINE_CPUS_AVAIL" < $LOGS_DIR/basic_header.log
CHECK_EXIT_CODE=$?
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "header"
@@ -129,9 +130,9 @@ PERF_EXIT_CODE=$?
REGEX_LINES_HEADER="#\s*Children\s+Self\s+sys\s+usr\s+Command\s+Shared Object\s+Symbol"
REGEX_LINES="\s*$RE_NUMBER%\s+$RE_NUMBER%\s+$RE_NUMBER%\s+$RE_NUMBER%\s+\S+\s+\[kernel\.(?:vmlinux)|(?:kallsyms)\]\s+\[[k\.]\]\s+\w+"
-../common/check_all_patterns_found.pl "$REGEX_LINES_HEADER" "$REGEX_LINES" < $LOGS_DIR/basic_cpuut.log
+"$DIR_PATH/../common/check_all_patterns_found.pl" "$REGEX_LINES_HEADER" "$REGEX_LINES" < $LOGS_DIR/basic_cpuut.log
CHECK_EXIT_CODE=$?
-../common/check_errors_whitelisted.pl "stderr-whitelist.txt" < $LOGS_DIR/basic_cpuut.err
+"$DIR_PATH/../common/check_errors_whitelisted.pl" "$DIR_PATH/stderr-whitelist.txt" < $LOGS_DIR/basic_cpuut.err
(( CHECK_EXIT_CODE += $? ))
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "show CPU utilization"
@@ -144,9 +145,9 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "show CPU utilization"
$CMD_PERF report --stdio -i $CURRENT_TEST_DIR/perf.data --pid=1 > $LOGS_DIR/basic_pid.log 2> $LOGS_DIR/basic_pid.err
PERF_EXIT_CODE=$?
-grep -P -v '^#' $LOGS_DIR/basic_pid.log | grep -P '\s+[\d\.]+%' | ../common/check_all_lines_matched.pl "systemd|init"
+grep -P -v '^#' $LOGS_DIR/basic_pid.log | grep -P '\s+[\d\.]+%' | "$DIR_PATH/../common/check_all_lines_matched.pl" "systemd|init"
CHECK_EXIT_CODE=$?
-../common/check_errors_whitelisted.pl "stderr-whitelist.txt" < $LOGS_DIR/basic_pid.err
+"$DIR_PATH/../common/check_errors_whitelisted.pl" "$DIR_PATH/stderr-whitelist.txt" < $LOGS_DIR/basic_pid.err
(( CHECK_EXIT_CODE += $? ))
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "pid"
@@ -159,9 +160,9 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "pid"
$CMD_PERF report --stdio -i $CURRENT_TEST_DIR/perf.data --symbols=dummynonexistingsymbol > $LOGS_DIR/basic_symbols.log 2> $LOGS_DIR/basic_symbols.err
PERF_EXIT_CODE=$?
-../common/check_all_lines_matched.pl "$RE_LINE_EMPTY" "$RE_LINE_COMMENT" < $LOGS_DIR/basic_symbols.log
+"$DIR_PATH/../common/check_all_lines_matched.pl" "$RE_LINE_EMPTY" "$RE_LINE_COMMENT" < $LOGS_DIR/basic_symbols.log
CHECK_EXIT_CODE=$?
-../common/check_errors_whitelisted.pl "stderr-whitelist.txt" < $LOGS_DIR/basic_symbols.err
+"$DIR_PATH/../common/check_errors_whitelisted.pl" "$DIR_PATH/stderr-whitelist.txt" < $LOGS_DIR/basic_symbols.err
(( CHECK_EXIT_CODE += $? ))
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "non-existing symbol"
@@ -174,9 +175,9 @@ print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "non-existing symbol"
$CMD_PERF report --stdio -i $CURRENT_TEST_DIR/perf.data --symbol-filter=map > $LOGS_DIR/basic_symbolfilter.log 2> $LOGS_DIR/basic_symbolfilter.err
PERF_EXIT_CODE=$?
-grep -P -v '^#' $LOGS_DIR/basic_symbolfilter.log | grep -P '\s+[\d\.]+%' | ../common/check_all_lines_matched.pl "\[[k\.]\]\s+.*map"
+grep -P -v '^#' $LOGS_DIR/basic_symbolfilter.log | grep -P '\s+[\d\.]+%' | "$DIR_PATH/../common/check_all_lines_matched.pl" "\[[k\.]\]\s+.*map"
CHECK_EXIT_CODE=$?
-../common/check_errors_whitelisted.pl "stderr-whitelist.txt" < $LOGS_DIR/basic_symbolfilter.err
+"$DIR_PATH/../common/check_errors_whitelisted.pl" "$DIR_PATH/stderr-whitelist.txt" < $LOGS_DIR/basic_symbolfilter.err
(( CHECK_EXIT_CODE += $? ))
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "symbol filter"
diff --git a/tools/perf/tests/shell/common/init.sh b/tools/perf/tests/shell/common/init.sh
index 13ec38c15c014252..36dabbd674fb1073 100644
--- a/tools/perf/tests/shell/common/init.sh
+++ b/tools/perf/tests/shell/common/init.sh
@@ -11,8 +11,8 @@
#
-. ../common/settings.sh
-. ../common/patterns.sh
+. "$(dirname $0)/../common/settings.sh"
+. "$(dirname $0)/../common/patterns.sh"
THIS_TEST_NAME=`basename $0 .sh`
--
2.43.0
next prev parent reply other threads:[~2024-12-20 22:03 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-20 22:03 [PATCH 00/10] Introduce structure for shell tests vmolnaro
2024-12-20 22:03 ` [PATCH 01/10] perf test perftool_testsuite: Add missing description vmolnaro
2024-12-20 22:03 ` [PATCH 02/10] perf test perftool_testsuite: Return correct value for skipping vmolnaro
2024-12-20 22:03 ` vmolnaro [this message]
2024-12-20 22:03 ` [PATCH 04/10] perf tests: Create a structure for shell tests vmolnaro
2024-12-20 22:03 ` [PATCH 05/10] perf testsuite: Fix perf-report tests installation vmolnaro
2024-12-20 22:03 ` [PATCH 06/10] perf test: Provide setup for the shell test suite vmolnaro
2024-12-20 22:03 ` [PATCH 07/10] perftool-testsuite: Add empty setup for base_probe vmolnaro
2024-12-20 22:03 ` [PATCH 08/10] perf test: Introduce storing logs for shell tests vmolnaro
2024-12-20 22:03 ` [PATCH 09/10] perf test: Format log directories " vmolnaro
2024-12-20 22:03 ` [PATCH 10/10] perf test: Remove perftool drivers vmolnaro
2025-01-13 15:24 ` [PATCH 00/10] Introduce structure for shell tests Arnaldo Carvalho de Melo
2025-01-13 18:25 ` [PATCH v2 " vmolnaro
2025-07-21 13:26 ` [PATCH v3 0/7] " Jakub Brnak
2025-07-21 13:26 ` [PATCH v3 1/7] perf test perftool_testsuite: Use absolute paths Jakub Brnak
2025-07-26 6:00 ` Namhyung Kim
2025-08-21 11:01 ` Jakub Brnak
2025-07-21 13:26 ` [PATCH v3 2/7] perf tests: Create a structure for shell tests Jakub Brnak
2025-07-21 19:39 ` Ian Rogers
2025-07-26 6:03 ` Namhyung Kim
2025-08-21 11:15 ` Jakub Brnak
2025-07-21 13:26 ` [PATCH v3 3/7] perf test: Provide setup for the shell test suite Jakub Brnak
2025-07-26 6:07 ` Namhyung Kim
2025-08-04 14:39 ` Michael Petlan
2025-07-21 13:26 ` [PATCH v3 4/7] perftool-testsuite: Add empty setup for base_probe Jakub Brnak
2025-07-21 13:26 ` [PATCH v3 5/7] perf test: Introduce storing logs for shell tests Jakub Brnak
2025-07-21 19:43 ` Ian Rogers
2025-07-26 6:17 ` Namhyung Kim
2025-07-21 13:26 ` [PATCH v3 6/7] perf test: Format log directories " Jakub Brnak
2025-07-26 6:21 ` Namhyung Kim
2025-07-21 13:26 ` [PATCH v3 7/7] perf test: Remove perftool drivers Jakub Brnak
2025-07-21 19:46 ` Ian Rogers
2025-07-31 12:54 ` [PATCH v3 0/7] Introduce structure for shell tests tejas05
2025-01-13 18:25 ` [PATCH v2 01/10] perf test perftool_testsuite: Add missing description vmolnaro
2025-01-13 18:25 ` [PATCH v2 02/10] perf test perftool_testsuite: Return correct value for skipping vmolnaro
2025-01-13 18:25 ` [PATCH v2 03/10] perf test perftool_testsuite: Use absolute paths vmolnaro
2025-01-13 18:25 ` [PATCH v2 04/10] perf tests: Create a structure for shell tests vmolnaro
2025-01-13 18:26 ` [PATCH v2 05/10] perf testsuite: Fix perf-report tests installation vmolnaro
2025-01-13 18:26 ` [PATCH v2 06/10] perf test: Provide setup for the shell test suite vmolnaro
2025-01-13 18:26 ` [PATCH v2 07/10] perftool-testsuite: Add empty setup for base_probe vmolnaro
2025-01-13 18:26 ` [PATCH v2 08/10] perf test: Introduce storing logs for shell tests vmolnaro
2025-01-13 18:26 ` [PATCH v2 09/10] perf test: Format log directories " vmolnaro
2025-01-13 18:26 ` [PATCH v2 10/10] perf test: Remove perftool drivers vmolnaro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241220220334.69198-4-vmolnaro@redhat.com \
--to=vmolnaro@redhat.com \
--cc=acme@kernel.org \
--cc=acme@redhat.com \
--cc=irogers@google.com \
--cc=linux-perf-users@vger.kernel.org \
--cc=mpetlan@redhat.com \
--cc=namhyung@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.