From: Tianling Shen <cnsztl@gmail.com>
To: Simon Glass <sjg@chromium.org>,
Philipp Tomsich <philipp.tomsich@vrull.eu>,
Kever Yang <kever.yang@rock-chips.com>,
Tianling Shen <cnsztl@gmail.com>, Jonas Karlman <jonas@kwiboo.se>
Cc: u-boot@lists.denx.de
Subject: [PATCH 7/7] board: rockchip: add FriendlyElec NanoPi R3S
Date: Thu, 26 Dec 2024 17:20:43 +0800 [thread overview]
Message-ID: <20241226092043.419511-8-cnsztl@gmail.com> (raw)
In-Reply-To: <20241226092043.419511-1-cnsztl@gmail.com>
The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps
Ethernet ports designed and developed by FriendlyElec for IoT
applications.
Specification:
- Rockchip RK3566
- 2GB LPDDR4X RAM
- optional 32GB eMMC module
- SD card slot
- 2x 1000 Base-T
- 3x LEDs (POWER, LAN, WAN)
- 2x Buttons (Reset, MaskROM)
- 1x USB 3.0 Port
- Type-C 5V 2A Power
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
---
arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi | 8 +++
board/rockchip/evb_rk3568/MAINTAINERS | 7 ++
configs/nanopi-r3s-rk3566_defconfig | 74 ++++++++++++++++++++++
doc/board/rockchip/rockchip.rst | 1 +
4 files changed, 90 insertions(+)
create mode 100644 arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi
create mode 100644 configs/nanopi-r3s-rk3566_defconfig
diff --git a/arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi b/arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi
new file mode 100644
index 0000000000..b66e5015d6
--- /dev/null
+++ b/arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rk356x-u-boot.dtsi"
+
+&vcc5v0_usb {
+ /delete-property/ regulator-always-on;
+ /delete-property/ regulator-boot-on;
+};
diff --git a/board/rockchip/evb_rk3568/MAINTAINERS b/board/rockchip/evb_rk3568/MAINTAINERS
index 588134ecb2..b2780401a3 100644
--- a/board/rockchip/evb_rk3568/MAINTAINERS
+++ b/board/rockchip/evb_rk3568/MAINTAINERS
@@ -28,6 +28,13 @@ F: configs/lubancat-2-rk3568_defconfig
F: arch/arm/dts/rk3568-lubancat-2.dts
F: arch/arm/dts/rk3568-lubancat-2-u-boot.dtsi
+NANOPI-R3S
+M: Tianling Shen <cnsztl@gmail.com>
+R: Jonas Karlman <jonas@kwiboo.se>
+S: Maintained
+F: configs/nanopi-r3s-rk3566_defconfig
+F: arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi
+
NANOPI-R5C
M: Tianling Shen <cnsztl@gmail.com>
R: Jonas Karlman <jonas@kwiboo.se>
diff --git a/configs/nanopi-r3s-rk3566_defconfig b/configs/nanopi-r3s-rk3566_defconfig
new file mode 100644
index 0000000000..f21c703ca7
--- /dev/null
+++ b/configs/nanopi-r3s-rk3566_defconfig
@@ -0,0 +1,74 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-nanopi-r3s"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-nanopi-r3s.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_RTL8169=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_ERRNO_STR=y
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index 9bab86d234..02d7a4b124 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -99,6 +99,7 @@ List of mainline supported Rockchip boards:
* rk3566
- Anbernic RGxx3 (anbernic-rgxx3-rk3566)
+ - FriendlyElec NanoPi R3S (nanopi-r3s-rk3566)
- Hardkernel ODROID-M1S (odroid-m1s-rk3566)
- Pine64 PineTab2 (pinetab2-rk3566)
- Pine64 Quartz64-A Board (quartz64-a-rk3566)
--
2.47.0
next prev parent reply other threads:[~2024-12-26 9:22 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-26 9:20 [PATCH 0/7] board: rockchip: add FriendlyElec NanoPi R3S Tianling Shen
2024-12-26 9:20 ` [PATCH 1/7] arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board Tianling Shen
2025-01-02 8:44 ` Kever Yang
2024-12-26 9:20 ` [PATCH 2/7] arm64: dts: rockchip: fix model name for FriendlyElec NanoPi R3S Tianling Shen
2025-01-02 8:45 ` Kever Yang
2024-12-26 9:20 ` [PATCH 3/7] arm64: dts: rockchip: replace deprecated snps, reset props for " Tianling Shen
2025-01-02 8:53 ` [PATCH 3/7] arm64: dts: rockchip: replace deprecated snps,reset " Kever Yang
2024-12-26 9:20 ` [PATCH 4/7] arm64: dts: rockchip: sort props in pmu_io_domains node " Tianling Shen
2025-01-02 8:54 ` Kever Yang
2024-12-26 9:20 ` [PATCH 5/7] arm64: dts: rockchip: enable eMMC HS200 mode " Tianling Shen
2025-01-02 8:54 ` Kever Yang
2024-12-26 9:20 ` [PATCH 6/7] arm64: dts: rockchip: reorder mmc aliases " Tianling Shen
2025-01-02 8:55 ` Kever Yang
2024-12-26 9:20 ` Tianling Shen [this message]
2025-01-02 8:55 ` [PATCH 7/7] board: rockchip: add FriendlyElec " Kever Yang
2025-01-06 3:06 ` Kever Yang
2025-01-06 4:39 ` Tianling Shen
2025-01-14 14:48 ` Quentin Schulz
2025-01-14 15:03 ` Tianling Shen
2025-01-14 14:39 ` [PATCH 0/7] " Quentin Schulz
2025-01-14 14:49 ` Tianling Shen
2025-01-14 15:21 ` Quentin Schulz
2025-01-14 16:14 ` Tianling Shen
2025-01-15 11:17 ` Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241226092043.419511-8-cnsztl@gmail.com \
--to=cnsztl@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kever.yang@rock-chips.com \
--cc=philipp.tomsich@vrull.eu \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.