From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 14/29] crypto: scatterwalk - add new functions for copying data
Date: Sun, 29 Dec 2024 16:14:03 -0800 [thread overview]
Message-ID: <20241230001418.74739-15-ebiggers@kernel.org> (raw)
In-Reply-To: <20241230001418.74739-1-ebiggers@kernel.org>
From: Eric Biggers <ebiggers@google.com>
Add memcpy_from_sglist() and memcpy_to_sglist() which are more readable
versions of scatterwalk_map_and_copy() with the 'out' argument 0 and 1
respectively. They follow the same argument order as memcpy_from_page()
and memcpy_to_page() from <linux/highmem.h>. Note that in the case of
memcpy_from_sglist(), this also happens to be the same argument order
that scatterwalk_map_and_copy() uses.
The new code is also faster, mainly because it builds the scatter_walk
directly without creating a temporary scatterlist. E.g., a 20%
performance improvement is seen for copying the AES-GCM auth tag.
Make scatterwalk_map_and_copy() be a wrapper around memcpy_from_sglist()
and memcpy_to_sglist(). Callers of scatterwalk_map_and_copy() should be
updated to call memcpy_from_sglist() or memcpy_to_sglist() directly, but
there are a lot of them so they aren't all being updated right away.
Also add functions memcpy_from_scatterwalk() and memcpy_to_scatterwalk()
which are similar but operate on a scatter_walk instead of a
scatterlist. These will replace scatterwalk_copychunks() with the 'out'
argument 0 and 1 respectively. Their behavior differs slightly from
scatterwalk_copychunks() in that they automatically take care of
flushing the dcache when needed, making them easier to use.
scatterwalk_copychunks() itself is left unchanged for now. It will be
removed after its callers are updated to use other functions instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
---
crypto/scatterwalk.c | 59 ++++++++++++++++++++++++++++++------
include/crypto/scatterwalk.h | 24 +++++++++++++--
2 files changed, 72 insertions(+), 11 deletions(-)
diff --git a/crypto/scatterwalk.c b/crypto/scatterwalk.c
index af436ad02e3f..2e7a532152d6 100644
--- a/crypto/scatterwalk.c
+++ b/crypto/scatterwalk.c
@@ -65,26 +65,67 @@ void scatterwalk_copychunks(void *buf, struct scatter_walk *walk,
scatterwalk_pagedone(walk, out & 1, 1);
}
}
EXPORT_SYMBOL_GPL(scatterwalk_copychunks);
-void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg,
- unsigned int start, unsigned int nbytes, int out)
+inline void memcpy_from_scatterwalk(void *buf, struct scatter_walk *walk,
+ unsigned int nbytes)
+{
+ do {
+ const void *src_addr;
+ unsigned int to_copy;
+
+ src_addr = scatterwalk_next(walk, nbytes, &to_copy);
+ memcpy(buf, src_addr, to_copy);
+ scatterwalk_done_src(walk, src_addr, to_copy);
+ buf += to_copy;
+ nbytes -= to_copy;
+ } while (nbytes);
+}
+EXPORT_SYMBOL_GPL(memcpy_from_scatterwalk);
+
+inline void memcpy_to_scatterwalk(struct scatter_walk *walk, const void *buf,
+ unsigned int nbytes)
+{
+ do {
+ void *dst_addr;
+ unsigned int to_copy;
+
+ dst_addr = scatterwalk_next(walk, nbytes, &to_copy);
+ memcpy(dst_addr, buf, to_copy);
+ scatterwalk_done_dst(walk, dst_addr, to_copy);
+ buf += to_copy;
+ nbytes -= to_copy;
+ } while (nbytes);
+}
+EXPORT_SYMBOL_GPL(memcpy_to_scatterwalk);
+
+void memcpy_from_sglist(void *buf, struct scatterlist *sg,
+ unsigned int start, unsigned int nbytes)
{
struct scatter_walk walk;
- struct scatterlist tmp[2];
- if (!nbytes)
+ if (unlikely(nbytes == 0)) /* in case sg == NULL */
return;
- sg = scatterwalk_ffwd(tmp, sg, start);
+ scatterwalk_start_at_pos(&walk, sg, start);
+ memcpy_from_scatterwalk(buf, &walk, nbytes);
+}
+EXPORT_SYMBOL_GPL(memcpy_from_sglist);
+
+void memcpy_to_sglist(struct scatterlist *sg, unsigned int start,
+ const void *buf, unsigned int nbytes)
+{
+ struct scatter_walk walk;
+
+ if (unlikely(nbytes == 0)) /* in case sg == NULL */
+ return;
- scatterwalk_start(&walk, sg);
- scatterwalk_copychunks(buf, &walk, nbytes, out);
- scatterwalk_done(&walk, out, 0);
+ scatterwalk_start_at_pos(&walk, sg, start);
+ memcpy_to_scatterwalk(&walk, buf, nbytes);
}
-EXPORT_SYMBOL_GPL(scatterwalk_map_and_copy);
+EXPORT_SYMBOL_GPL(memcpy_to_sglist);
struct scatterlist *scatterwalk_ffwd(struct scatterlist dst[2],
struct scatterlist *src,
unsigned int len)
{
diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h
index 8e83c43016c9..1689ecd7ddaf 100644
--- a/include/crypto/scatterwalk.h
+++ b/include/crypto/scatterwalk.h
@@ -168,12 +168,32 @@ static inline void scatterwalk_done_dst(struct scatter_walk *walk,
void scatterwalk_skip(struct scatter_walk *walk, unsigned int nbytes);
void scatterwalk_copychunks(void *buf, struct scatter_walk *walk,
size_t nbytes, int out);
-void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg,
- unsigned int start, unsigned int nbytes, int out);
+void memcpy_from_scatterwalk(void *buf, struct scatter_walk *walk,
+ unsigned int nbytes);
+
+void memcpy_to_scatterwalk(struct scatter_walk *walk, const void *buf,
+ unsigned int nbytes);
+
+void memcpy_from_sglist(void *buf, struct scatterlist *sg,
+ unsigned int start, unsigned int nbytes);
+
+void memcpy_to_sglist(struct scatterlist *sg, unsigned int start,
+ const void *buf, unsigned int nbytes);
+
+/* In new code, please use memcpy_{from,to}_sglist() directly instead. */
+static inline void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg,
+ unsigned int start,
+ unsigned int nbytes, int out)
+{
+ if (out)
+ memcpy_to_sglist(sg, start, buf, nbytes);
+ else
+ memcpy_from_sglist(buf, sg, start, nbytes);
+}
struct scatterlist *scatterwalk_ffwd(struct scatterlist dst[2],
struct scatterlist *src,
unsigned int len);
--
2.47.1
next prev parent reply other threads:[~2024-12-30 0:16 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-30 0:13 [PATCH v2 00/29] crypto: scatterlist handling improvements Eric Biggers
2024-12-30 0:13 ` [PATCH v2 01/29] crypto: skcipher - document skcipher_walk_done() and rename some vars Eric Biggers
2024-12-30 0:13 ` [PATCH v2 02/29] crypto: skcipher - remove unnecessary page alignment of bounce buffer Eric Biggers
2024-12-30 0:13 ` [PATCH v2 03/29] crypto: skcipher - remove redundant clamping to page size Eric Biggers
2024-12-30 0:13 ` [PATCH v2 04/29] crypto: skcipher - remove redundant check for SKCIPHER_WALK_SLOW Eric Biggers
2024-12-30 0:13 ` [PATCH v2 05/29] crypto: skcipher - fold skcipher_walk_skcipher() into skcipher_walk_virt() Eric Biggers
2024-12-30 0:13 ` [PATCH v2 06/29] crypto: skcipher - clean up initialization of skcipher_walk::flags Eric Biggers
2024-12-30 0:13 ` [PATCH v2 07/29] crypto: skcipher - optimize initializing skcipher_walk fields Eric Biggers
2024-12-30 0:13 ` [PATCH v2 08/29] crypto: skcipher - call cond_resched() directly Eric Biggers
2024-12-30 0:13 ` [PATCH v2 09/29] crypto: omap - switch from scatter_walk to plain offset Eric Biggers
2024-12-30 0:13 ` [PATCH v2 10/29] crypto: powerpc/p10-aes-gcm - simplify handling of linear associated data Eric Biggers
2025-01-02 11:50 ` Christophe Leroy
2025-01-02 17:24 ` Eric Biggers
2024-12-30 0:14 ` [PATCH v2 11/29] crypto: scatterwalk - move to next sg entry just in time Eric Biggers
2024-12-30 0:14 ` [PATCH v2 12/29] crypto: scatterwalk - add new functions for skipping data Eric Biggers
2024-12-30 0:14 ` [PATCH v2 13/29] crypto: scatterwalk - add new functions for iterating through data Eric Biggers
2024-12-30 0:14 ` Eric Biggers [this message]
2024-12-30 0:14 ` [PATCH v2 15/29] crypto: scatterwalk - add scatterwalk_get_sglist() Eric Biggers
2024-12-30 0:14 ` [PATCH v2 16/29] crypto: skcipher - use scatterwalk_start_at_pos() Eric Biggers
2024-12-30 0:14 ` [PATCH v2 17/29] crypto: aegis - use the new scatterwalk functions Eric Biggers
2024-12-30 0:14 ` [PATCH v2 18/29] crypto: arm/ghash " Eric Biggers
2024-12-30 0:14 ` [PATCH v2 19/29] crypto: arm64 " Eric Biggers
2024-12-30 0:14 ` [PATCH v2 20/29] crypto: nx " Eric Biggers
2024-12-30 0:14 ` [PATCH v2 21/29] crypto: s390/aes-gcm " Eric Biggers
2025-01-08 15:06 ` Harald Freudenberger
2024-12-30 0:14 ` [PATCH v2 22/29] crypto: s5p-sss " Eric Biggers
2024-12-30 0:14 ` [PATCH v2 23/29] crypto: stm32 " Eric Biggers
2024-12-30 0:14 ` [PATCH v2 24/29] crypto: x86/aes-gcm " Eric Biggers
2024-12-30 0:14 ` [PATCH v2 25/29] crypto: x86/aegis " Eric Biggers
2024-12-30 0:14 ` [PATCH v2 26/29] net/tls: " Eric Biggers
2024-12-30 0:14 ` [PATCH v2 27/29] crypto: skcipher - " Eric Biggers
2024-12-30 0:14 ` [PATCH v2 28/29] crypto: scatterwalk - remove obsolete functions Eric Biggers
2024-12-30 0:14 ` [PATCH v2 29/29] crypto: scatterwalk - don't split at page boundaries when !HIGHMEM Eric Biggers
2024-12-30 1:31 ` [PATCH v2 00/29] crypto: scatterlist handling improvements Eric Biggers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241230001418.74739-15-ebiggers@kernel.org \
--to=ebiggers@kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.