From: Simon Glass <sjg@chromium.org>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: Simon Glass <sjg@chromium.org>,
Anand Moon <linux.amoon@gmail.com>, Bin Meng <bmeng.cn@gmail.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
Jerome Forissier <jerome.forissier@linaro.org>,
Masahisa Kojima <kojima.masahisa@socionext.com>,
Michal Simek <michal.simek@amd.com>,
Patrick Delaunay <patrick.delaunay@foss.st.com>,
Patrick Rudolph <patrick.rudolph@9elements.com>,
Raymond Mao <raymond.mao@linaro.org>,
Sughosh Ganu <sughosh.ganu@linaro.org>,
Tom Rini <trini@konsulko.com>,
Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Subject: [PATCH 20/67] emulation: Use bloblist to hold tables
Date: Thu, 2 Jan 2025 11:09:06 +1300 [thread overview]
Message-ID: <20250101221003.1944600-21-sjg@chromium.org> (raw)
In-Reply-To: <20250101221003.1944600-1-sjg@chromium.org>
QEMU can have its own internal ACPI and SMBIOS tables. At present U-Boot
copies out the SMBIOS tables but points directly to the ACPI ones.
The ACPI tables are not aligned on a 4KB boundary, which means that UPL
cannot use them directly, since it uses a reserved-memory node for the
tables and that it assumed (by EDK2) to be 4KB-aligned.
On x86, QEMU completely takes over the generation of these tables, thus
making it difficult to use any common code.
Adjust the logic to fit within the existing table-generation code. Use a
bloblist always and ensure that the ACPI tables is placed in an aligned
region. Set a size of 8K for QEMU. This does not actually put all the
tables in one place, for QEMU, since it currently adds a pointer to the
tables in QFW.
On ARM, enable bloblist so that SMBIOS tables can be added to the
bloblist.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
arch/x86/lib/tables.c | 2 +-
configs/qemu-x86_64_defconfig | 1 -
configs/qemu_arm64_defconfig | 2 ++
configs/qemu_arm_defconfig | 2 ++
drivers/misc/qfw_acpi.c | 37 ++++++++++++++++++++++++++--
drivers/misc/qfw_smbios.c | 45 ++++++++++++++++-------------------
lib/Kconfig | 1 +
lib/Makefile | 5 ++++
8 files changed, 67 insertions(+), 28 deletions(-)
diff --git a/arch/x86/lib/tables.c b/arch/x86/lib/tables.c
index 45a70e92763..5fc7dc75377 100644
--- a/arch/x86/lib/tables.c
+++ b/arch/x86/lib/tables.c
@@ -61,7 +61,7 @@ static struct table_info table_list[] = {
#ifdef CONFIG_GENERATE_ACPI_TABLE
{ "acpi", write_acpi_tables, BLOBLISTT_ACPI_TABLES, 0x10000, 0x1000},
#endif
-#if defined(CONFIG_GENERATE_SMBIOS_TABLE) && !defined(CONFIG_QFW_SMBIOS)
+#ifdef CONFIG_GENERATE_SMBIOS_TABLE
{ "smbios", write_smbios_table, BLOBLISTT_SMBIOS_TABLES, 0x1000, 0x100},
#endif
};
diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig
index f93721fceb8..3c0fc7a34fe 100644
--- a/configs/qemu-x86_64_defconfig
+++ b/configs/qemu-x86_64_defconfig
@@ -33,7 +33,6 @@ CONFIG_LOGF_FUNC=y
CONFIG_SPL_LOG=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_PCI_INIT_R=y
-CONFIG_BLOBLIST=y
CONFIG_BLOBLIST_FIXED=y
CONFIG_BLOBLIST_ADDR=0x10000
CONFIG_SPL_NO_BSS_LIMIT=y
diff --git a/configs/qemu_arm64_defconfig b/configs/qemu_arm64_defconfig
index 8dffb91e93b..8a529acfba3 100644
--- a/configs/qemu_arm64_defconfig
+++ b/configs/qemu_arm64_defconfig
@@ -27,6 +27,8 @@ CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_PCI_INIT_R=y
+CONFIG_BLOBLIST=y
+CONFIG_BLOBLIST_SIZE_RELOC=0x2000
CONFIG_CMD_SMBIOS=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_BOOTEFI_SELFTEST=y
diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig
index cc4f4540fd5..1dfa946f17d 100644
--- a/configs/qemu_arm_defconfig
+++ b/configs/qemu_arm_defconfig
@@ -28,6 +28,8 @@ CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_PCI_INIT_R=y
+CONFIG_BLOBLIST=y
+CONFIG_BLOBLIST_SIZE_RELOC=0x2000
CONFIG_CMD_BOOTEFI_SELFTEST=y
CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CMD_DFU=y
diff --git a/drivers/misc/qfw_acpi.c b/drivers/misc/qfw_acpi.c
index 7ffed1e8c02..0d0cf764689 100644
--- a/drivers/misc/qfw_acpi.c
+++ b/drivers/misc/qfw_acpi.c
@@ -7,6 +7,7 @@
#define LOG_CATEGORY UCLASS_QFW
#include <acpi/acpi_table.h>
+#include <bloblist.h>
#include <errno.h>
#include <malloc.h>
#include <mapmem.h>
@@ -160,6 +161,15 @@ ulong write_acpi_tables(ulong addr)
struct bios_linker_entry *entry;
uint32_t size;
struct udevice *dev;
+ struct acpi_ctx *ctx;
+
+ ctx = malloc(sizeof(*ctx));
+ if (!ctx) {
+ printf("error: out of memory for acpi ctx\n");
+ return addr;
+ }
+
+ acpi_setup_ctx(ctx, addr);
ret = qfw_get_dev(&dev);
if (ret) {
@@ -257,6 +267,29 @@ ulong acpi_get_rsdp_addr(void)
return file->addr;
}
+void acpi_write_rsdp(struct acpi_rsdp *rsdp, struct acpi_rsdt *rsdt,
+ struct acpi_xsdt *xsdt)
+{
+ memset(rsdp, 0, sizeof(struct acpi_rsdp));
+
+ memcpy(rsdp->signature, RSDP_SIG, 8);
+ memcpy(rsdp->oem_id, OEM_ID, 6);
+
+ if (rsdt)
+ rsdp->rsdt_address = nomap_to_sysmem(rsdt);
+
+ if (xsdt)
+ rsdp->xsdt_address = nomap_to_sysmem(xsdt);
+
+ rsdp->length = sizeof(struct acpi_rsdp);
+ rsdp->revision = ACPI_RSDP_REV_ACPI_2_0;
+
+ /* Calculate checksums */
+ rsdp->checksum = table_compute_checksum(rsdp, 20);
+ rsdp->ext_checksum = table_compute_checksum(rsdp,
+ sizeof(struct acpi_rsdp));
+}
+
#ifndef CONFIG_X86
static int evt_write_acpi_tables(void)
{
@@ -264,9 +297,9 @@ static int evt_write_acpi_tables(void)
void *ptr;
/* Reserve 64K for ACPI tables, aligned to a 4K boundary */
- ptr = memalign(SZ_4K, SZ_64K);
+ ptr = bloblist_add(BLOBLISTT_ACPI_TABLES, SZ_64K, 12);
if (!ptr)
- return -ENOMEM;
+ return -ENOBUFS;
addr = map_to_sysmem(ptr);
/* Generate ACPI tables */
diff --git a/drivers/misc/qfw_smbios.c b/drivers/misc/qfw_smbios.c
index c3e8c310d00..93c4a80286b 100644
--- a/drivers/misc/qfw_smbios.c
+++ b/drivers/misc/qfw_smbios.c
@@ -5,6 +5,7 @@
#define LOG_CATEGORY UCLASS_QFW
+#include <bloblist.h>
#include <efi_loader.h>
#include <errno.h>
#include <log.h>
@@ -15,6 +16,7 @@
#include <tables_csum.h>
#include <linux/sizes.h>
#include <asm/global_data.h>
+#include <linux/err.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -105,11 +107,10 @@ out:
/**
* qfw_write_smbios_tables() - copy SMBIOS tables from QEMU
*
- * @addr: target buffer
- * @size: size of target buffer
+ * @addr: address of target buffer
* Return: 0 for success, -ve on error
*/
-static int qfw_write_smbios_tables(u8 *addr, uint32_t size)
+ulong write_smbios_table(ulong addr)
{
int ret;
struct udevice *dev;
@@ -143,16 +144,13 @@ static int qfw_write_smbios_tables(u8 *addr, uint32_t size)
table = qfw_load_smbios_table(dev, &table_size,
"etc/smbios/smbios-tables");
- if (table_size + sizeof(struct smbios3_entry) > size) {
- free(table);
- return -ENOMEM;
- }
- memcpy(addr, table, table_size);
+ memcpy((void *)addr, table, table_size);
free(table);
- return 0;
+ return addr + table_size;
}
+#ifndef CONFIG_X86
/**
* qfw_evt_write_smbios_tables() - event handler for copying QEMU SMBIOS tables
*
@@ -160,9 +158,9 @@ static int qfw_write_smbios_tables(u8 *addr, uint32_t size)
*/
static int qfw_evt_write_smbios_tables(void)
{
- phys_addr_t addr;
+ ulong addr, end;
void *ptr;
- int ret;
+
/*
* TODO:
* This size is currently hard coded in lib/efi_loader/efi_smbios.c.
@@ -170,22 +168,21 @@ static int qfw_evt_write_smbios_tables(void)
*/
uint32_t size = SZ_4K;
- /* Reserve 64K for SMBIOS tables, aligned to a 4K boundary */
- ptr = memalign(SZ_4K, size);
- if (!ptr) {
- log_err("Out of memory\n");
- return -ENOMEM;
- }
+ log_debug("qfw_evt_write_smbios_tables bloblist\n");
+ /* Reserve 4K for SMBIOS tables, aligned to a 4K boundary */
+ ptr = bloblist_add(BLOBLISTT_SMBIOS_TABLES, size, 12);
+ if (!ptr)
+ return log_msg_ret("bloblist", -ENOBUFS);
+
addr = map_to_sysmem(ptr);
/* Generate SMBIOS tables */
- ret = qfw_write_smbios_tables(ptr, size);
- if (ret) {
- if (CONFIG_IS_ENABLED(GENERATE_SMBIOS_TABLE)) {
- log_info("Falling back to U-Boot generated SMBIOS tables\n");
- write_smbios_table(addr);
- }
+ end = write_smbios_table(addr);
+ if (IS_ERR_VALUE(end)) {
+ log_warning("SMBIOS: Failed to write (err=%dE)\n", (int)end);
} else {
+ if (end - addr > size)
+ return -ENOMEM;
log_debug("SMBIOS tables copied from QEMU\n");
}
@@ -193,5 +190,5 @@ static int qfw_evt_write_smbios_tables(void)
return 0;
}
-
EVENT_SPY_SIMPLE(EVT_LAST_STAGE_INIT, qfw_evt_write_smbios_tables);
+#endif /* !X86 */
diff --git a/lib/Kconfig b/lib/Kconfig
index 56ffdfa1839..3a1aaf08c70 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -1005,6 +1005,7 @@ menu "System tables"
config BLOBLIST_TABLES
bool "Put tables in a bloblist"
depends on BLOBLIST
+ default y if X86
default y if (ARM && EFI_LOADER && GENERATE_ACPI_TABLE)
default n
help
diff --git a/lib/Makefile b/lib/Makefile
index dbcfa87ebd6..95aafe0c182 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -41,7 +41,12 @@ obj-$(CONFIG_ERRNO_STR) += errno_str.o
obj-$(CONFIG_FIT) += fdtdec_common.o
obj-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
obj-$(CONFIG_GZIP_COMPRESSED) += gzip.o
+
+# With QEMU the SMBIOS tables come from there, not from U-Boot
+ifndef CONFIG_QFW_SMBIOS
obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += smbios.o
+endif
+
obj-$(CONFIG_SMBIOS_PARSER) += smbios-parser.o
obj-$(CONFIG_IMAGE_SPARSE) += image-sparse.o
obj-y += initcall.o
--
2.43.0
next prev parent reply other threads:[~2025-01-01 22:13 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-01 22:08 [PATCH 00/67] upl: Align with the updated spec Simon Glass
2025-01-01 22:08 ` [PATCH 01/67] bloblist: Make BLOBLIST_ALLOC the default Simon Glass
2025-01-01 22:08 ` [PATCH 02/67] abuf: Provide a way to get the buffer address Simon Glass
2025-01-01 22:08 ` [PATCH 03/67] abuf: Allow use in host tools Simon Glass
2025-01-01 22:08 ` [PATCH 04/67] abuf: Provide a constant buffer Simon Glass
2025-01-01 22:08 ` [PATCH 05/67] cpu: Provide a way to get the physical-address size Simon Glass
2025-01-01 22:08 ` [PATCH 06/67] serial: Support info() method in ns16550 xPL with UPL Simon Glass
2025-01-01 22:08 ` [PATCH 07/67] mkimage: Update map_to_sysmem() to match its prototype Simon Glass
2025-01-01 22:08 ` [PATCH 08/67] x86: Emable meminfo command Simon Glass
2025-01-03 14:51 ` Heinrich Schuchardt
2025-01-04 19:30 ` Simon Glass
2025-01-01 22:08 ` [PATCH 09/67] x86: Show the timestamp counter with bdinfo Simon Glass
2025-01-01 22:08 ` [PATCH 10/67] ofnode: Use 4K for a default tree-size Simon Glass
2025-01-01 22:08 ` [PATCH 11/67] ofnode: Indicate when out of space in a few places Simon Glass
2025-01-01 22:08 ` [PATCH 12/67] ofnode: Update of_add_subnode() to indicate name is alloced Simon Glass
2025-01-01 22:08 ` [PATCH 13/67] boot: Rename fit_image_get_data() Simon Glass
2025-01-03 14:55 ` Heinrich Schuchardt
2025-01-01 22:09 ` [PATCH 14/67] boot: Rename fit_image_get_data_and_size() Simon Glass
2025-01-01 22:09 ` [PATCH 15/67] boot: Update fit_image_get_emb_data to use abuf Simon Glass
2025-01-01 22:09 ` [PATCH 16/67] boot: Use fit_image_get_data() to get data Simon Glass
2025-01-01 22:09 ` [PATCH 17/67] boot: Update fit_image_get_data() to use abuf Simon Glass
2025-01-01 22:09 ` [PATCH 18/67] test: Fix inpected typo in upl test Simon Glass
2025-01-01 22:09 ` [PATCH 19/67] emulation: fdt: Relax condition for OF_HAS_PRIOR_STAGE Simon Glass
2025-01-01 22:09 ` Simon Glass [this message]
2025-01-01 22:09 ` [PATCH 21/67] x86: Create more space for SPL with qemu-x86_64 Simon Glass
2025-01-01 22:09 ` [PATCH 22/67] upl: Create a function to create a memory node Simon Glass
2025-01-01 22:09 ` [PATCH 23/67] upl: Update add_upl_memmap() to use write_mem_node() Simon Glass
2025-01-01 22:09 ` [PATCH 24/67] upl: Update add_upl_memres() " Simon Glass
2025-01-01 22:09 ` [PATCH 25/67] upl: Support writing a UPL only for testing Simon Glass
2025-01-01 22:09 ` [PATCH 26/67] upl: Drop enum upl_serial_access_type Simon Glass
2025-01-01 22:09 ` [PATCH 27/67] upl: Init serial and graphics alists in upl_init() Simon Glass
2025-01-01 22:09 ` [PATCH 28/67] upl: Move serial and graphics addition-code to upl_common Simon Glass
2025-01-01 22:09 ` [PATCH 29/67] pci: video: Set up the pixel-format field Simon Glass
2025-01-01 22:09 ` [PATCH 30/67] x86: Show an error if video fails Simon Glass
2025-01-01 22:09 ` [PATCH 31/67] x86: Support jumping to a UPL image Simon Glass
2025-01-01 22:09 ` [PATCH 32/67] x86: Enable UPL handoff for SPL Simon Glass
2025-01-01 22:09 ` [PATCH 33/67] x86: Align the SMBIOS table to a 4K boundary Simon Glass
2025-01-03 15:10 ` Heinrich Schuchardt
2025-01-01 22:09 ` [PATCH 34/67] upl: Require OFNODE_MULTI_TREE when writing a UPL handoff Simon Glass
2025-01-01 22:09 ` [PATCH 35/67] upl: Drop the argument to spl_write_upl_handoff() Simon Glass
2025-01-01 22:09 ` [PATCH 36/67] x86: emulation: Enable UPL Simon Glass
2025-01-01 22:09 ` [PATCH 37/67] upl: Correct comment and condition in add_upl_memres() Simon Glass
2025-01-01 22:09 ` [PATCH 38/67] upl: Add addr/size tags in the reserved-memory node Simon Glass
2025-01-01 22:09 ` [PATCH 39/67] upl: Update upl_add_graphics() to return framebuffer Simon Glass
2025-01-01 22:09 ` [PATCH 40/67] upl: Add a function to write a UPL handoff to an abuf Simon Glass
2025-01-01 22:09 ` [PATCH 41/67] upl: Use a 64-bit value for a memregion base-address Simon Glass
2025-01-01 22:09 ` [PATCH 42/67] upl: Set bit 32 of the address when using ISA Simon Glass
2025-01-01 22:09 ` [PATCH 43/67] upl: Add RAM to the memory region Simon Glass
2025-01-01 22:09 ` [PATCH 44/67] upl: Add a compatible string for the upl-params node Simon Glass
2025-01-01 22:09 ` [PATCH 45/67] upl: Move buffer_addr_size() higher and rename Simon Glass
2025-01-01 22:09 ` [PATCH 46/67] upl: Factor out part of encode_reg() to new function Simon Glass
2025-01-01 22:09 ` [PATCH 47/67] upl: Move decode_addr_size() higher and rename Simon Glass
2025-01-01 22:09 ` [PATCH 48/67] upl: Factor out part of decode_reg() to new function Simon Glass
2025-01-01 22:09 ` [PATCH 49/67] upl: Correct name of upl-images Simon Glass
2025-01-01 22:09 ` [PATCH 50/67] dm: core: Clarify behaviour of ofnode_name_eq() Simon Glass
2025-01-01 22:09 ` [PATCH 51/67] dm: core: Allow ofnode_name_eq() to accept a unit address Simon Glass
2025-01-01 22:09 ` [PATCH 52/67] dm: core: Rewrite ofnode_find_subnode() to use ofnode API Simon Glass
2025-01-01 22:09 ` [PATCH 53/67] upl: test: Show the handoff FDT when debugging Simon Glass
2025-01-01 22:09 ` [PATCH 54/67] upl: Use a reg property to specify the FIT address and size Simon Glass
2025-01-01 22:09 ` [PATCH 55/67] upl: Update and tidy writing of images Simon Glass
2025-01-01 22:09 ` [PATCH 56/67] upl: Make use of alist_for_each() Simon Glass
2025-01-01 22:09 ` [PATCH 57/67] upl: Correct use of sizeof() Simon Glass
2025-01-01 22:09 ` [PATCH 58/67] upl: Drop acpi_nvs_size Simon Glass
2025-01-01 22:09 ` [PATCH 59/67] upl: Improve uniqueness of log_msg_ret() strings Simon Glass
2025-01-01 22:09 ` [PATCH 60/67] upl: Add PCI information Simon Glass
2025-01-01 22:09 ` [PATCH 61/67] upl: Handle serial on an ISA bus with /chosen node Simon Glass
2025-01-01 22:09 ` [PATCH 62/67] upl: Add missing word in comment for upl_write_handoff() Simon Glass
2025-01-01 22:09 ` [PATCH 63/67] upl: Add a command to execute a UPL payload Simon Glass
2025-01-01 22:09 ` [PATCH 64/67] scripts: Update qemu script to use 64-bit on x86 always Simon Glass
2025-01-01 22:09 ` [PATCH 65/67] scripts: Update qemu script to support specifying a UPL Simon Glass
2025-01-01 22:09 ` [PATCH 66/67] upl: Add reserved memory for the ACPI and SMBIOS tables Simon Glass
2025-01-01 22:09 ` [PATCH 67/67] upl: Add an 'addr' property for Tianocore Simon Glass
2025-01-02 14:44 ` [PATCH 00/67] upl: Align with the updated spec Tom Rini
2025-01-02 23:45 ` Simon Glass
2025-01-03 14:26 ` Tom Rini
2025-01-04 19:32 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250101221003.1944600-21-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=bmeng.cn@gmail.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jerome.forissier@linaro.org \
--cc=kojima.masahisa@socionext.com \
--cc=linux.amoon@gmail.com \
--cc=michal.simek@amd.com \
--cc=patrick.delaunay@foss.st.com \
--cc=patrick.rudolph@9elements.com \
--cc=raymond.mao@linaro.org \
--cc=sughosh.ganu@linaro.org \
--cc=trini@konsulko.com \
--cc=tuomas.tynkkynen@iki.fi \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.