From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,willy@infradead.org,vbabka@suse.cz,souravpanda@google.com,shakeel.butt@linux.dev,richard.weiyang@gmail.com,peterz@infradead.org,peterx@redhat.com,paulmck@kernel.org,pasha.tatashin@soleen.com,oleg@redhat.com,mjguzik@gmail.com,minchan@google.com,mhocko@suse.com,mgorman@techsingularity.net,lorenzo.stoakes@oracle.com,lokeshgidra@google.com,Liam.Howlett@Oracle.com,klarasmodin@gmail.com,jannh@google.com,hughd@google.com,hdanton@sina.com,hannes@cmpxchg.org,dhowells@redhat.com,david@redhat.com,dave@stgolabs.net,corbet@lwn.net,brauner@kernel.org,surenb@google.com,akpm@linux-foundation.org
Subject: + docs-mm-document-latest-changes-to-vm_lock.patch added to mm-unstable branch
Date: Wed, 08 Jan 2025 21:44:58 -0800 [thread overview]
Message-ID: <20250109054458.7D339C4CED2@smtp.kernel.org> (raw)
The patch titled
Subject: docs/mm: document latest changes to vm_lock
has been added to the -mm mm-unstable branch. Its filename is
docs-mm-document-latest-changes-to-vm_lock.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/docs-mm-document-latest-changes-to-vm_lock.patch
This patch will later appear in the mm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Suren Baghdasaryan <surenb@google.com>
Subject: docs/mm: document latest changes to vm_lock
Date: Wed, 8 Jan 2025 18:30:25 -0800
Change the documentation to reflect that vm_lock is integrated into vma
and replaced with vm_refcnt. Document newly introduced
vma_start_read_locked{_nested} functions.
Link: https://lkml.kernel.org/r/20250109023025.2242447-17-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
Documentation/mm/process_addrs.rst | 46 +++++++++++++++------------
1 file changed, 27 insertions(+), 19 deletions(-)
--- a/Documentation/mm/process_addrs.rst~docs-mm-document-latest-changes-to-vm_lock
+++ a/Documentation/mm/process_addrs.rst
@@ -716,9 +716,14 @@ calls :c:func:`!rcu_read_lock` to ensure
critical section, then attempts to VMA lock it via :c:func:`!vma_start_read`,
before releasing the RCU lock via :c:func:`!rcu_read_unlock`.
-VMA read locks hold the read lock on the :c:member:`!vma->vm_lock` semaphore for
-their duration and the caller of :c:func:`!lock_vma_under_rcu` must release it
-via :c:func:`!vma_end_read`.
+In cases when the user already holds mmap read lock, :c:func:`!vma_start_read_locked`
+and :c:func:`!vma_start_read_locked_nested` can be used. These functions do not
+fail due to lock contention but the caller should still check their return values
+in case they fail for other reasons.
+
+VMA read locks increment :c:member:`!vma.vm_refcnt` reference counter for their
+duration and the caller of :c:func:`!lock_vma_under_rcu` must drop it via
+:c:func:`!vma_end_read`.
VMA **write** locks are acquired via :c:func:`!vma_start_write` in instances where a
VMA is about to be modified, unlike :c:func:`!vma_start_read` the lock is always
@@ -726,9 +731,9 @@ acquired. An mmap write lock **must** be
lock, releasing or downgrading the mmap write lock also releases the VMA write
lock so there is no :c:func:`!vma_end_write` function.
-Note that a semaphore write lock is not held across a VMA lock. Rather, a
-sequence number is used for serialisation, and the write semaphore is only
-acquired at the point of write lock to update this.
+Note that when write-locking a VMA lock, the :c:member:`!vma.vm_refcnt` is temporarily
+modified so that readers can detect the presense of a writer. The reference counter is
+restored once the vma sequence number used for serialisation is updated.
This ensures the semantics we require - VMA write locks provide exclusive write
access to the VMA.
@@ -738,7 +743,7 @@ Implementation details
The VMA lock mechanism is designed to be a lightweight means of avoiding the use
of the heavily contended mmap lock. It is implemented using a combination of a
-read/write semaphore and sequence numbers belonging to the containing
+reference counter and sequence numbers belonging to the containing
:c:struct:`!struct mm_struct` and the VMA.
Read locks are acquired via :c:func:`!vma_start_read`, which is an optimistic
@@ -779,28 +784,31 @@ release of any VMA locks on its release
keep VMAs locked across entirely separate write operations. It also maintains
correct lock ordering.
-Each time a VMA read lock is acquired, we acquire a read lock on the
-:c:member:`!vma->vm_lock` read/write semaphore and hold it, while checking that
-the sequence count of the VMA does not match that of the mm.
-
-If it does, the read lock fails. If it does not, we hold the lock, excluding
-writers, but permitting other readers, who will also obtain this lock under RCU.
+Each time a VMA read lock is acquired, we increment :c:member:`!vma.vm_refcnt`
+reference counter and check that the sequence count of the VMA does not match
+that of the mm.
+
+If it does, the read lock fails and :c:member:`!vma.vm_refcnt` is dropped.
+If it does not, we keep the reference counter raised, excluding writers, but
+permitting other readers, who can also obtain this lock under RCU.
Importantly, maple tree operations performed in :c:func:`!lock_vma_under_rcu`
are also RCU safe, so the whole read lock operation is guaranteed to function
correctly.
-On the write side, we acquire a write lock on the :c:member:`!vma->vm_lock`
-read/write semaphore, before setting the VMA's sequence number under this lock,
-also simultaneously holding the mmap write lock.
+On the write side, we set a bit in :c:member:`!vma.vm_refcnt` which can't be
+modified by readers and wait for all readers to drop their reference count.
+Once there are no readers, VMA's sequence number is set to match that of the
+mm. During this entire operation mmap write lock is held.
This way, if any read locks are in effect, :c:func:`!vma_start_write` will sleep
until these are finished and mutual exclusion is achieved.
-After setting the VMA's sequence number, the lock is released, avoiding
-complexity with a long-term held write lock.
+After setting the VMA's sequence number, the bit in :c:member:`!vma.vm_refcnt`
+indicating a writer is cleared. From this point on, VMA's sequence number will
+indicate VMA's write-locked state until mmap write lock is dropped or downgraded.
-This clever combination of a read/write semaphore and sequence count allows for
+This clever combination of a reference counter and sequence count allows for
fast RCU-based per-VMA lock acquisition (especially on page fault, though
utilised elsewhere) with minimal complexity around lock ordering.
_
Patches currently in -mm which might be from surenb@google.com are
alloc_tag-skip-pgalloc_tag_swap-if-profiling-is-disabled.patch
tools-fix-atomic_set-definition-to-set-the-value-correctly.patch
seqlock-add-raw_seqcount_try_begin.patch
mm-convert-mm_lock_seq-to-a-proper-seqcount.patch
mm-introduce-mmap_lock_speculate_try_beginretry.patch
mm-introduce-vma_start_read_locked_nested-helpers.patch
mm-move-per-vma-lock-into-vm_area_struct.patch
mm-mark-vma-as-detached-until-its-added-into-vma-tree.patch
mm-introduce-vma_iter_store_attached-to-use-with-attached-vmas.patch
mm-mark-vmas-detached-upon-exit.patch
types-move-struct-rcuwait-into-typesh.patch
mm-allow-vma_start_read_locked-vma_start_read_locked_nested-to-fail.patch
mm-move-mmap_init_lock-out-of-the-header-file.patch
mm-uninline-the-main-body-of-vma_start_write.patch
refcount-introduce-__refcount_addinc_not_zero_limited.patch
mm-replace-vm_lock-and-detached-flag-with-a-reference-count.patch
mm-debug-print-vm_refcnt-state-when-dumping-the-vma.patch
mm-remove-extra-vma_numab_state_init-call.patch
mm-prepare-lock_vma_under_rcu-for-vma-reuse-possibility.patch
mm-make-vma-cache-slab_typesafe_by_rcu.patch
docs-mm-document-latest-changes-to-vm_lock.patch
alloc_tag-avoid-current-alloc_tag-manipulations-when-profiling-is-disabled.patch
next reply other threads:[~2025-01-09 5:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-09 5:44 Andrew Morton [this message]
-- strict thread matches above, loose matches on Subject: below --
2025-02-15 0:42 + docs-mm-document-latest-changes-to-vm_lock.patch added to mm-unstable branch Andrew Morton
2025-01-12 5:47 Andrew Morton
2024-12-26 21:16 Andrew Morton
2024-12-07 4:29 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250109054458.7D339C4CED2@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=Liam.Howlett@Oracle.com \
--cc=brauner@kernel.org \
--cc=corbet@lwn.net \
--cc=dave@stgolabs.net \
--cc=david@redhat.com \
--cc=dhowells@redhat.com \
--cc=hannes@cmpxchg.org \
--cc=hdanton@sina.com \
--cc=hughd@google.com \
--cc=jannh@google.com \
--cc=klarasmodin@gmail.com \
--cc=lokeshgidra@google.com \
--cc=lorenzo.stoakes@oracle.com \
--cc=mgorman@techsingularity.net \
--cc=mhocko@suse.com \
--cc=minchan@google.com \
--cc=mjguzik@gmail.com \
--cc=mm-commits@vger.kernel.org \
--cc=oleg@redhat.com \
--cc=pasha.tatashin@soleen.com \
--cc=paulmck@kernel.org \
--cc=peterx@redhat.com \
--cc=peterz@infradead.org \
--cc=richard.weiyang@gmail.com \
--cc=shakeel.butt@linux.dev \
--cc=souravpanda@google.com \
--cc=surenb@google.com \
--cc=vbabka@suse.cz \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.