Re: [PATCH net-next v2 07/14] net: ethernet: qualcomm: Initialize PPE queue settings

[Simon Horman <horms@kernel.org>]

On Wed, Jan 08, 2025 at 09:47:14PM +0800, Luo Jie wrote:
> Configure unicast and multicast hardware queues for the PPE
> ports to enable packet forwarding between the ports.
> 
> Each PPE port is assigned with a range of queues. The queue ID
> selection for a packet is decided by the queue base and queue
> offset that is configured based on the internal priority and
> the RSS hash value of the packet.
> 
> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
> ---
>  drivers/net/ethernet/qualcomm/ppe/ppe_config.c | 357 ++++++++++++++++++++++++-
>  drivers/net/ethernet/qualcomm/ppe/ppe_config.h |  63 +++++
>  drivers/net/ethernet/qualcomm/ppe/ppe_regs.h   |  21 ++
>  3 files changed, 440 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe_config.c b/drivers/net/ethernet/qualcomm/ppe/ppe_config.c

...

> @@ -673,6 +701,111 @@ static struct ppe_scheduler_port_config ppe_port_sch_config[] = {
>  	},
>  };
>  
> +/* The scheduler resource is applied to each PPE port, The resource
> + * includes the unicast & multicast queues, flow nodes and DRR nodes.
> + */
> +static struct ppe_port_schedule_resource ppe_scheduler_res[] = {
> +	{	.ucastq_start	= 0,
> +		.ucastq_end	= 63,
> +		.mcastq_start	= 256,
> +		.ucastq_end	= 271,

Hi Luo Jie,

This appears to duplicate the initialisation of .ucastq_end.
Should the line above initialise .mcastq_end instead?

Likewise for other elements of this array.

Flagged by W=1 builds with both clang-19 and gcc-14.

> +		.flow_id_start	= 0,
> +		.flow_id_end	= 0,
> +		.l0node_start	= 0,
> +		.l0node_end	= 7,
> +		.l1node_start	= 0,
> +		.l1node_end	= 0,
> +	},
> +	{	.ucastq_start	= 144,
> +		.ucastq_end	= 159,
> +		.mcastq_start	= 272,
> +		.ucastq_end	= 275,
> +		.flow_id_start	= 36,
> +		.flow_id_end	= 39,
> +		.l0node_start	= 48,
> +		.l0node_end	= 63,
> +		.l1node_start	= 8,
> +		.l1node_end	= 11,
> +	},

...

> +};

...