[PATCH net-next v4 2/4] net: ti: icssg-prueth: Add Multicast Filtering support for VLAN in MAC mode

[MD Danish Anwar <danishanwar@ti.com>]

Add multicast filtering support for VLAN interfaces in dual EMAC mode
for ICSSG driver.

The driver uses vlan_for_each() API to get the list of available
vlans. The driver then sync mc addr of vlan interface with a locally
mainatined list emac->vlan_mcast_list[vid] using __hw_addr_sync_multiple()
API.

__hw_addr_sync_multiple() is used instead of __hw_addr_sync() to sync
vdev->mc with local list because the sync_cnt for addresses in vdev->mc
will already be set by the vlan_dev_set_rx_mode() [net/8021q/vlan_dev.c]
and __hw_addr_sync() only syncs when the sync_cnt == 0. Whereas
__hw_addr_sync_multiple() can sync addresses even if sync_cnt is not 0.
Export __hw_addr_sync_multiple() so that driver can use it.

Once the local list is synced, driver calls __hw_addr_sync_dev() with
the local list, vdev, sync and unsync callbacks.

__hw_addr_sync_dev() is used with the local maintained list as the list
to synchronize instead of using __dev_mc_sync() on vdev because
__dev_mc_sync() on vdev will call __hw_addr_sync_dev() on vdev->mc and
sync_cnt for addresses in vdev->mc will already be set by the
vlan_dev_set_rx_mode() [net/8021q/vlan_dev.c] and __hw_addr_sync_dev()
only syncs if the sync_cnt of addresses in the list (vdev->mc in this case)
is 0. Whereas __hw_addr_sync_dev() on local list will work fine as the
sync_cnt for addresses in the local list will still be 0.

Based on change in addresses in the local list, sync / unsync callbacks
are invoked. In the sync / unsync API in driver, based on whether the ndev
is vlan or not, driver passes appropriate vid to FDB helper functions.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 drivers/net/ethernet/ti/icssg/icssg_prueth.c | 67 ++++++++++++++++----
 drivers/net/ethernet/ti/icssg/icssg_prueth.h |  6 ++
 include/linux/netdevice.h                    |  3 +
 net/core/dev_addr_lists.c                    |  7 +-
 4 files changed, 66 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
index 1d510c9dabff..b2d0d7b7b6d9 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
@@ -561,30 +561,44 @@ const struct icss_iep_clockops prueth_iep_clockops = {
 
 static int icssg_prueth_add_mcast(struct net_device *ndev, const u8 *addr)
 {
-	struct prueth_emac *emac = netdev_priv(ndev);
-	int port_mask = BIT(emac->port_id);
+	struct net_device *real_dev;
+	struct prueth_emac *emac;
+	int port_mask;
+	u8 vlan_id;
 
-	port_mask |= icssg_fdb_lookup(emac, addr, 0);
-	icssg_fdb_add_del(emac, addr, 0, port_mask, true);
-	icssg_vtbl_modify(emac, 0, port_mask, port_mask, true);
+	vlan_id = is_vlan_dev(ndev) ? vlan_dev_vlan_id(ndev) : PRUETH_DFLT_VLAN_MAC;
+	real_dev = is_vlan_dev(ndev) ? vlan_dev_real_dev(ndev) : ndev;
+	emac = netdev_priv(real_dev);
+
+	port_mask = BIT(emac->port_id) | icssg_fdb_lookup(emac, addr, vlan_id);
+	icssg_fdb_add_del(emac, addr, vlan_id, port_mask, true);
+	icssg_vtbl_modify(emac, vlan_id, port_mask, port_mask, true);
 
 	return 0;
 }
 
 static int icssg_prueth_del_mcast(struct net_device *ndev, const u8 *addr)
 {
-	struct prueth_emac *emac = netdev_priv(ndev);
-	int port_mask = BIT(emac->port_id);
+	struct net_device *real_dev;
+	struct prueth_emac *emac;
 	int other_port_mask;
+	int port_mask;
+	u8 vlan_id;
+
+	vlan_id = is_vlan_dev(ndev) ? vlan_dev_vlan_id(ndev) : PRUETH_DFLT_VLAN_MAC;
+	real_dev = is_vlan_dev(ndev) ? vlan_dev_real_dev(ndev) : ndev;
+	emac = netdev_priv(real_dev);
 
-	other_port_mask = port_mask ^ icssg_fdb_lookup(emac, addr, 0);
+	port_mask = BIT(emac->port_id);
+	other_port_mask = port_mask ^ icssg_fdb_lookup(emac, addr, vlan_id);
 
-	icssg_fdb_add_del(emac, addr, 0, port_mask, false);
-	icssg_vtbl_modify(emac, 0, port_mask, port_mask, false);
+	icssg_fdb_add_del(emac, addr, vlan_id, port_mask, false);
+	icssg_vtbl_modify(emac, vlan_id, port_mask, port_mask, false);
 
 	if (other_port_mask) {
-		icssg_fdb_add_del(emac, addr, 0, other_port_mask, true);
-		icssg_vtbl_modify(emac, 0, other_port_mask, other_port_mask, true);
+		icssg_fdb_add_del(emac, addr, vlan_id, other_port_mask, true);
+		icssg_vtbl_modify(emac, vlan_id, other_port_mask,
+				  other_port_mask, true);
 	}
 
 	return 0;
@@ -620,6 +634,25 @@ static int icssg_prueth_hsr_del_mcast(struct net_device *ndev, const u8 *addr)
 	return 0;
 }
 
+static int icssg_update_vlan_mcast(struct net_device *vdev, int vid,
+				   void *args)
+{
+	struct prueth_emac *emac = args;
+
+	if (!vdev || !vid)
+		return 0;
+
+	netif_addr_lock_bh(vdev);
+	__hw_addr_sync_multiple(&emac->vlan_mcast_list[vid], &vdev->mc,
+				vdev->addr_len);
+	netif_addr_unlock_bh(vdev);
+
+	__hw_addr_sync_dev(&emac->vlan_mcast_list[vid], vdev,
+			   icssg_prueth_add_mcast, icssg_prueth_del_mcast);
+
+	return 0;
+}
+
 /**
  * emac_ndo_open - EMAC device open
  * @ndev: network adapter device
@@ -857,12 +890,17 @@ static void emac_ndo_set_rx_mode_work(struct work_struct *work)
 		return;
 	}
 
-	if (emac->prueth->is_hsr_offload_mode)
+	if (emac->prueth->is_hsr_offload_mode) {
 		__dev_mc_sync(ndev, icssg_prueth_hsr_add_mcast,
 			      icssg_prueth_hsr_del_mcast);
-	else
+	} else {
 		__dev_mc_sync(ndev, icssg_prueth_add_mcast,
 			      icssg_prueth_del_mcast);
+		if (rtnl_trylock()) {
+			vlan_for_each(ndev, icssg_update_vlan_mcast, emac);
+			rtnl_unlock();
+		}
+	}
 }
 
 /**
@@ -913,6 +951,7 @@ static int emac_ndo_vlan_rx_add_vid(struct net_device *ndev,
 	if (prueth->is_hsr_offload_mode)
 		port_mask |= BIT(PRUETH_PORT_HOST);
 
+	__hw_addr_init(&emac->vlan_mcast_list[vid]);
 	netdev_dbg(emac->ndev, "VID add vid:%u port_mask:%X untag_mask %X\n",
 		   vid, port_mask, untag_mask);
 
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index 5473315ea204..c8f7a22cb253 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -83,6 +83,10 @@
 #define ICSS_CMD_ADD_FILTER 0x7
 #define ICSS_CMD_ADD_MAC 0x8
 
+/* VLAN Filtering Related MACROs */
+#define PRUETH_DFLT_VLAN_MAC	0
+#define MAX_VLAN_ID		256
+
 /* In switch mode there are 3 real ports i.e. 3 mac addrs.
  * however Linux sees only the host side port. The other 2 ports
  * are the switch ports.
@@ -200,6 +204,8 @@ struct prueth_emac {
 	/* RX IRQ Coalescing Related */
 	struct hrtimer rx_hrtimer;
 	unsigned long rx_pace_timeout_ns;
+
+	struct netdev_hw_addr_list vlan_mcast_list[MAX_VLAN_ID];
 };
 
 /**
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 1812564b5204..99265cc864cc 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -4689,6 +4689,9 @@ int devm_register_netdev(struct device *dev, struct net_device *ndev);
 /* General hardware address lists handling functions */
 int __hw_addr_sync(struct netdev_hw_addr_list *to_list,
 		   struct netdev_hw_addr_list *from_list, int addr_len);
+int __hw_addr_sync_multiple(struct netdev_hw_addr_list *to_list,
+			    struct netdev_hw_addr_list *from_list,
+			    int addr_len);
 void __hw_addr_unsync(struct netdev_hw_addr_list *to_list,
 		      struct netdev_hw_addr_list *from_list, int addr_len);
 int __hw_addr_sync_dev(struct netdev_hw_addr_list *list,
diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c
index 166e404f7c03..90716bd736f3 100644
--- a/net/core/dev_addr_lists.c
+++ b/net/core/dev_addr_lists.c
@@ -242,9 +242,9 @@ static void __hw_addr_unsync_one(struct netdev_hw_addr_list *to_list,
 	__hw_addr_del_entry(from_list, ha, false, false);
 }
 
-static int __hw_addr_sync_multiple(struct netdev_hw_addr_list *to_list,
-				   struct netdev_hw_addr_list *from_list,
-				   int addr_len)
+int __hw_addr_sync_multiple(struct netdev_hw_addr_list *to_list,
+			    struct netdev_hw_addr_list *from_list,
+			    int addr_len)
 {
 	int err = 0;
 	struct netdev_hw_addr *ha, *tmp;
@@ -260,6 +260,7 @@ static int __hw_addr_sync_multiple(struct netdev_hw_addr_list *to_list,
 	}
 	return err;
 }
+EXPORT_SYMBOL(__hw_addr_sync_multiple);
 
 /* This function only works where there is a strict 1-1 relationship
  * between source and destination of they synch. If you ever need to
-- 
2.34.1