From: Taehee Yoo <ap420073@gmail.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, netdev@vger.kernel.org,
almasrymina@google.com, donald.hunter@gmail.com, corbet@lwn.net,
michael.chan@broadcom.com, andrew+netdev@lunn.ch,
hawk@kernel.org, ilias.apalodimas@linaro.org, ast@kernel.org,
daniel@iogearbox.net, john.fastabend@gmail.com, dw@davidwei.uk,
sdf@fomichev.me, asml.silence@gmail.com, brett.creeley@amd.com,
linux-doc@vger.kernel.org
Cc: kory.maincent@bootlin.com, maxime.chevallier@bootlin.com,
danieller@nvidia.com, hengqi@linux.alibaba.com,
ecree.xilinx@gmail.com, przemyslaw.kitszel@intel.com,
hkallweit1@gmail.com, ahmed.zaki@intel.com,
rrameshbabu@nvidia.com, idosch@nvidia.com, jiri@resnulli.us,
bigeasy@linutronix.de, lorenzo@kernel.org, jdamato@fastly.com,
aleksander.lobakin@intel.com, kaiyuanz@google.com,
willemb@google.com, daniel.zahka@gmail.com, ap420073@gmail.com,
Andy Gospodarek <gospo@broadcom.com>
Subject: [PATCH net-next v8 06/10] bnxt_en: add support for rx-copybreak ethtool command
Date: Sat, 11 Jan 2025 14:45:09 +0000 [thread overview]
Message-ID: <20250111144513.1289403-7-ap420073@gmail.com> (raw)
In-Reply-To: <20250111144513.1289403-1-ap420073@gmail.com>
The bnxt_en driver supports rx-copybreak, but it couldn't be set by
userspace. Only the default value(256) has worked.
This patch makes the bnxt_en driver support following command.
`ethtool --set-tunable <devname> rx-copybreak <value> ` and
`ethtool --get-tunable <devname> rx-copybreak`.
By this patch, hds_threshol is set to the rx-copybreak value.
But it will be set by `ethtool -G eth0 hds-thresh N`
in the next patch.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
---
v8:
- Add Review tag from Jakub.
v7:
- return -EBUSY when interface is not running.
v6:
- No changes.
v5:
- Do not set HDS if XDP is attached.
- rx_size and pkt_size are always bigger than 256.
v4:
- Remove min rx-copybreak value.
- Add Review tag from Brett.
- Add Test tag from Stanislav.
v3:
- Update copybreak value after closing nic and before opening nic when
the device is running.
v2:
- Define max/vim rx_copybreak value.
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 28 +++++++-----
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 5 ++-
.../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 44 ++++++++++++++++++-
3 files changed, 63 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 46edea75e062..9b5ca1e3d99a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -81,7 +81,6 @@ MODULE_DESCRIPTION("Broadcom NetXtreme network driver");
#define BNXT_RX_OFFSET (NET_SKB_PAD + NET_IP_ALIGN)
#define BNXT_RX_DMA_OFFSET NET_SKB_PAD
-#define BNXT_RX_COPY_THRESH 256
#define BNXT_TX_PUSH_THRESH 164
@@ -1343,13 +1342,13 @@ static struct sk_buff *bnxt_copy_data(struct bnxt_napi *bnapi, u8 *data,
if (!skb)
return NULL;
- dma_sync_single_for_cpu(&pdev->dev, mapping, bp->rx_copy_thresh,
+ dma_sync_single_for_cpu(&pdev->dev, mapping, bp->rx_copybreak,
bp->rx_dir);
memcpy(skb->data - NET_IP_ALIGN, data - NET_IP_ALIGN,
len + NET_IP_ALIGN);
- dma_sync_single_for_device(&pdev->dev, mapping, bp->rx_copy_thresh,
+ dma_sync_single_for_device(&pdev->dev, mapping, bp->rx_copybreak,
bp->rx_dir);
skb_put(skb, len);
@@ -1842,7 +1841,7 @@ static inline struct sk_buff *bnxt_tpa_end(struct bnxt *bp,
return NULL;
}
- if (len <= bp->rx_copy_thresh) {
+ if (len <= bp->rx_copybreak) {
skb = bnxt_copy_skb(bnapi, data_ptr, len, mapping);
if (!skb) {
bnxt_abort_tpa(cpr, idx, agg_bufs);
@@ -2176,7 +2175,7 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
}
}
- if (len <= bp->rx_copy_thresh) {
+ if (len <= bp->rx_copybreak) {
if (!xdp_active)
skb = bnxt_copy_skb(bnapi, data_ptr, len, dma_addr);
else
@@ -4601,6 +4600,11 @@ void bnxt_set_tpa_flags(struct bnxt *bp)
bp->flags |= BNXT_FLAG_GRO;
}
+static void bnxt_init_ring_params(struct bnxt *bp)
+{
+ bp->rx_copybreak = BNXT_DEFAULT_RX_COPYBREAK;
+}
+
/* bp->rx_ring_size, bp->tx_ring_size, dev->mtu, BNXT_FLAG_{G|L}RO flags must
* be set on entry.
*/
@@ -4615,7 +4619,6 @@ void bnxt_set_ring_params(struct bnxt *bp)
rx_space = rx_size + ALIGN(max(NET_SKB_PAD, XDP_PACKET_HEADROOM), 8) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- bp->rx_copy_thresh = BNXT_RX_COPY_THRESH;
ring_size = bp->rx_ring_size;
bp->rx_agg_ring_size = 0;
bp->rx_agg_nr_pages = 0;
@@ -4660,7 +4663,9 @@ void bnxt_set_ring_params(struct bnxt *bp)
ALIGN(max(NET_SKB_PAD, XDP_PACKET_HEADROOM), 8) -
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
} else {
- rx_size = SKB_DATA_ALIGN(BNXT_RX_COPY_THRESH + NET_IP_ALIGN);
+ rx_size = SKB_DATA_ALIGN(max(BNXT_DEFAULT_RX_COPYBREAK,
+ bp->rx_copybreak) +
+ NET_IP_ALIGN);
rx_space = rx_size + NET_SKB_PAD +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
}
@@ -6566,16 +6571,14 @@ static int bnxt_hwrm_vnic_set_hds(struct bnxt *bp, struct bnxt_vnic_info *vnic)
req->flags = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_JUMBO_PLACEMENT);
req->enables = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_JUMBO_THRESH_VALID);
+ req->jumbo_thresh = cpu_to_le16(bp->rx_buf_use_size);
- if (BNXT_RX_PAGE_MODE(bp)) {
- req->jumbo_thresh = cpu_to_le16(bp->rx_buf_use_size);
- } else {
+ if (!BNXT_RX_PAGE_MODE(bp) && (bp->flags & BNXT_FLAG_AGG_RINGS)) {
req->flags |= cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV4 |
VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV6);
req->enables |=
cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_HDS_THRESHOLD_VALID);
- req->jumbo_thresh = cpu_to_le16(bp->rx_copy_thresh);
- req->hds_threshold = cpu_to_le16(bp->rx_copy_thresh);
+ req->hds_threshold = cpu_to_le16(bp->rx_copybreak);
}
req->vnic_id = cpu_to_le32(vnic->fw_vnic_id);
return hwrm_req_send(bp, req);
@@ -16233,6 +16236,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
bnxt_init_l2_fltr_tbl(bp);
bnxt_set_rx_skb_mode(bp, false);
bnxt_set_tpa_flags(bp);
+ bnxt_init_ring_params(bp);
bnxt_set_ring_params(bp);
bnxt_rdma_aux_device_init(bp);
rc = bnxt_set_dflt_rings(bp, true);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 094c9e95b463..7edb92ce5976 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -34,6 +34,9 @@
#include <linux/firmware/broadcom/tee_bnxt_fw.h>
#endif
+#define BNXT_DEFAULT_RX_COPYBREAK 256
+#define BNXT_MAX_RX_COPYBREAK 1024
+
extern struct list_head bnxt_block_cb_list;
struct page_pool;
@@ -2347,7 +2350,7 @@ struct bnxt {
enum dma_data_direction rx_dir;
u32 rx_ring_size;
u32 rx_agg_ring_size;
- u32 rx_copy_thresh;
+ u32 rx_copybreak;
u32 rx_ring_mask;
u32 rx_agg_ring_mask;
int rx_nr_pages;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 75a59dd72bce..e9e63d95df17 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -4328,6 +4328,45 @@ static int bnxt_get_eee(struct net_device *dev, struct ethtool_keee *edata)
return 0;
}
+static int bnxt_set_tunable(struct net_device *dev,
+ const struct ethtool_tunable *tuna,
+ const void *data)
+{
+ struct bnxt *bp = netdev_priv(dev);
+ u32 rx_copybreak;
+
+ switch (tuna->id) {
+ case ETHTOOL_RX_COPYBREAK:
+ rx_copybreak = *(u32 *)data;
+ if (rx_copybreak > BNXT_MAX_RX_COPYBREAK)
+ return -ERANGE;
+ if (rx_copybreak != bp->rx_copybreak) {
+ if (netif_running(dev))
+ return -EBUSY;
+ bp->rx_copybreak = rx_copybreak;
+ }
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int bnxt_get_tunable(struct net_device *dev,
+ const struct ethtool_tunable *tuna, void *data)
+{
+ struct bnxt *bp = netdev_priv(dev);
+
+ switch (tuna->id) {
+ case ETHTOOL_RX_COPYBREAK:
+ *(u32 *)data = bp->rx_copybreak;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
static int bnxt_read_sfp_module_eeprom_info(struct bnxt *bp, u16 i2c_addr,
u16 page_number, u8 bank,
u16 start_addr, u16 data_length,
@@ -4790,7 +4829,8 @@ static int bnxt_run_loopback(struct bnxt *bp)
cpr = &rxr->bnapi->cp_ring;
if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS)
cpr = rxr->rx_cpr;
- pkt_size = min(bp->dev->mtu + ETH_HLEN, bp->rx_copy_thresh);
+ pkt_size = min(bp->dev->mtu + ETH_HLEN, max(BNXT_DEFAULT_RX_COPYBREAK,
+ bp->rx_copybreak));
skb = netdev_alloc_skb(bp->dev, pkt_size);
if (!skb)
return -ENOMEM;
@@ -5372,6 +5412,8 @@ const struct ethtool_ops bnxt_ethtool_ops = {
.get_link_ext_stats = bnxt_get_link_ext_stats,
.get_eee = bnxt_get_eee,
.set_eee = bnxt_set_eee,
+ .get_tunable = bnxt_get_tunable,
+ .set_tunable = bnxt_set_tunable,
.get_module_info = bnxt_get_module_info,
.get_module_eeprom = bnxt_get_module_eeprom,
.get_module_eeprom_by_page = bnxt_get_module_eeprom_by_page,
--
2.34.1
next prev parent reply other threads:[~2025-01-11 14:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-11 14:45 [PATCH net-next v8 0/10] bnxt_en: implement tcp-data-split and thresh option Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 01/10] net: ethtool: add hds_config member in ethtool_netdev_state Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 02/10] net: ethtool: add support for configuring hds-thresh Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 03/10] net: devmem: add ring parameter filtering Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 04/10] net: ethtool: " Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 05/10] net: disallow setup single buffer XDP when tcp-data-split is enabled Taehee Yoo
2025-01-11 14:45 ` Taehee Yoo [this message]
2025-01-11 14:45 ` [PATCH net-next v8 07/10] bnxt_en: add support for tcp-data-split ethtool command Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 08/10] bnxt_en: add support for hds-thresh " Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 09/10] netdevsim: add HDS feature Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 10/10] selftest: net-drv: hds: add test for " Taehee Yoo
2025-01-13 23:08 ` [PATCH net-next v8 0/10] bnxt_en: implement tcp-data-split and thresh option Jakub Kicinski
2025-01-14 3:20 ` Taehee Yoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250111144513.1289403-7-ap420073@gmail.com \
--to=ap420073@gmail.com \
--cc=ahmed.zaki@intel.com \
--cc=aleksander.lobakin@intel.com \
--cc=almasrymina@google.com \
--cc=andrew+netdev@lunn.ch \
--cc=asml.silence@gmail.com \
--cc=ast@kernel.org \
--cc=bigeasy@linutronix.de \
--cc=brett.creeley@amd.com \
--cc=corbet@lwn.net \
--cc=daniel.zahka@gmail.com \
--cc=daniel@iogearbox.net \
--cc=danieller@nvidia.com \
--cc=davem@davemloft.net \
--cc=donald.hunter@gmail.com \
--cc=dw@davidwei.uk \
--cc=ecree.xilinx@gmail.com \
--cc=edumazet@google.com \
--cc=gospo@broadcom.com \
--cc=hawk@kernel.org \
--cc=hengqi@linux.alibaba.com \
--cc=hkallweit1@gmail.com \
--cc=idosch@nvidia.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jdamato@fastly.com \
--cc=jiri@resnulli.us \
--cc=john.fastabend@gmail.com \
--cc=kaiyuanz@google.com \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=rrameshbabu@nvidia.com \
--cc=sdf@fomichev.me \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.