Re: [PATCH v3 0/5] x1e80100 RTC support

[Alexandre Belloni <alexandre.belloni@bootlin.com>]

Hello,

Did I miss v4 of this series?

On 14/10/2024 20:47:25-0400, Jonathan Marek wrote:
> x1e80100 needs a workaround because the RTC alarm is not owned by HLOS.
> It also needs the same offset workaround as sc8280xp/etc.
> 
> v2: remove duplicated ops and use RTC_FEATURE_ALARM instead
> v3:
>  - renamed flag to qcom,no-alarm
>  - don't remove alarm registers/interrupt from dts
> 
> Jonathan Marek (5):
>   rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
>   dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
>   arm64: dts: qcom: x1e80100-pmics: enable RTC
>   arm64: dts: qcom: x1e80100-crd: add rtc offset to set rtc time
>   arm64: dts: qcom: x1e78100-t14s: add rtc offset to set rtc time
> 
>  .../bindings/rtc/qcom-pm8xxx-rtc.yaml         |  5 +++
>  .../qcom/x1e78100-lenovo-thinkpad-t14s.dts    | 11 +++++
>  arch/arm64/boot/dts/qcom/x1e80100-crd.dts     | 11 +++++
>  arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi  |  3 +-
>  drivers/rtc/rtc-pm8xxx.c                      | 44 +++++++++++++------
>  5 files changed, 58 insertions(+), 16 deletions(-)
> 
> -- 
> 2.45.1
> 
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com