[PATCH hwmon 1/2] hwmon: (mlxreg-fan) Separate methods of fan setting coming from different subsystems

[Vadim Pasternak <vadimp@nvidia.com>]

Distinct between fan speed setting request coming for hwmon and
thermal subsystems.

There are fields 'last_hwmon_state' and 'last_thermal_state' in the
structure 'mlxreg_fan_pwm', which respectively store the cooling state
set by the 'hwmon' and 'thermal' subsystem.
The purpose is to make arbitration of fan speed setting. For example, if
fan speed required to be not lower than some limit, such setting is to
be performed through 'hwmon' subsystem, thus 'thermal' subsystem will
not set fan below this limit.

Currently, the 'last_thermal_state' is also be updated by 'hwmon' causing
cooling state to never be set to a lower value.

Eliminate update of 'last_thermal_state', when request is coming from
'hwmon' subsystem.

Fixes: da74944d3a46 ("hwmon: (mlxreg-fan) Use pwm attribute for setting fan speed low limit")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
---
 drivers/hwmon/mlxreg-fan.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c
index a5f89aab3fb4..f848232c2c00 100644
--- a/drivers/hwmon/mlxreg-fan.c
+++ b/drivers/hwmon/mlxreg-fan.c
@@ -113,8 +113,8 @@ struct mlxreg_fan {
 	int divider;
 };
 
-static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
-				    unsigned long state);
+static int _mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
+				     unsigned long state, bool thermal);
 
 static int
 mlxreg_fan_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
@@ -224,8 +224,9 @@ mlxreg_fan_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 				 * last thermal state.
 				 */
 				if (pwm->last_hwmon_state >= pwm->last_thermal_state)
-					return mlxreg_fan_set_cur_state(pwm->cdev,
-									pwm->last_hwmon_state);
+					return _mlxreg_fan_set_cur_state(pwm->cdev,
+									 pwm->last_hwmon_state,
+									 false);
 				return 0;
 			}
 			return regmap_write(fan->regmap, pwm->reg, val);
@@ -357,9 +358,8 @@ static int mlxreg_fan_get_cur_state(struct thermal_cooling_device *cdev,
 	return 0;
 }
 
-static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
-				    unsigned long state)
-
+static int _mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
+				     unsigned long state, bool thermal)
 {
 	struct mlxreg_fan_pwm *pwm = cdev->devdata;
 	struct mlxreg_fan *fan = pwm->fan;
@@ -369,7 +369,8 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
 		return -EINVAL;
 
 	/* Save thermal state. */
-	pwm->last_thermal_state = state;
+	if (thermal)
+		pwm->last_thermal_state = state;
 
 	state = max_t(unsigned long, state, pwm->last_hwmon_state);
 	err = regmap_write(fan->regmap, pwm->reg,
@@ -381,6 +382,13 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
 	return 0;
 }
 
+static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
+				    unsigned long state)
+
+{
+	return _mlxreg_fan_set_cur_state(cdev, state, true);
+}
+
 static const struct thermal_cooling_device_ops mlxreg_fan_cooling_ops = {
 	.get_max_state	= mlxreg_fan_get_max_state,
 	.get_cur_state	= mlxreg_fan_get_cur_state,
-- 
2.44.0