From: Ming Yu <a0282524688@gmail.com>
To: tmyu0@nuvoton.com, lee@kernel.org, linus.walleij@linaro.org,
brgl@bgdev.pl, andi.shyti@kernel.org, mkl@pengutronix.de,
mailhol.vincent@wanadoo.fr, andrew+netdev@lunn.ch,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, wim@linux-watchdog.org, linux@roeck-us.net,
jdelvare@suse.com, alexandre.belloni@bootlin.com
Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-i2c@vger.kernel.org, linux-can@vger.kernel.org,
netdev@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-rtc@vger.kernel.org,
linux-usb@vger.kernel.org, Ming Yu <a0282524688@gmail.com>
Subject: [PATCH v5 3/7] i2c: Add Nuvoton NCT6694 I2C support
Date: Tue, 14 Jan 2025 11:30:06 +0800 [thread overview]
Message-ID: <20250114033010.2445925-4-a0282524688@gmail.com> (raw)
In-Reply-To: <20250114033010.2445925-1-a0282524688@gmail.com>
This driver supports I2C adapter functionality for NCT6694 MFD
device based on USB interface, each I2C controller use default
baudrate(100K).
Signed-off-by: Ming Yu <a0282524688@gmail.com>
---
MAINTAINERS | 1 +
drivers/i2c/busses/Kconfig | 10 ++
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-nct6694.c | 157 +++++++++++++++++++++++++++++++
4 files changed, 169 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-nct6694.c
diff --git a/MAINTAINERS b/MAINTAINERS
index f752051f4c3b..4e72f749cdf2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16722,6 +16722,7 @@ M: Ming Yu <tmyu0@nuvoton.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/gpio/gpio-nct6694.c
+F: drivers/i2c/busses/i2c-nct6694.c
F: drivers/mfd/nct6694.c
F: include/linux/mfd/nct6694.h
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index ceb3ecdf884b..a3f60e6953bd 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1328,6 +1328,16 @@ config I2C_LJCA
This driver can also be built as a module. If so, the module
will be called i2c-ljca.
+config I2C_NCT6694
+ tristate "Nuvoton NCT6694 I2C adapter support"
+ depends on MFD_NCT6694
+ help
+ If you say yes to this option, support will be included for Nuvoton
+ NCT6694, a USB to I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called i2c-nct6694.
+
config I2C_CP2615
tristate "Silicon Labs CP2615 USB sound card and I2C adapter"
depends on USB
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 1c2a4510abe4..c5a60116dd54 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -133,6 +133,7 @@ obj-$(CONFIG_I2C_GXP) += i2c-gxp.o
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o
obj-$(CONFIG_I2C_LJCA) += i2c-ljca.o
+obj-$(CONFIG_I2C_NCT6694) += i2c-nct6694.o
obj-$(CONFIG_I2C_CP2615) += i2c-cp2615.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PCI1XXXX) += i2c-mchp-pci1xxxx.o
diff --git a/drivers/i2c/busses/i2c-nct6694.c b/drivers/i2c/busses/i2c-nct6694.c
new file mode 100644
index 000000000000..49e8110662e2
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nct6694.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nuvoton NCT6694 I2C adapter driver based on USB interface.
+ *
+ * Copyright (C) 2024 Nuvoton Technology Corp.
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/nct6694.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+/*
+ * USB command module type for NCT6694 I2C controller.
+ * This defines the module type used for communication with the NCT6694
+ * I2C controller over the USB interface.
+ */
+#define NCT6694_I2C_MOD 0x03
+
+/* Command 00h - I2C Deliver */
+#define NCT6694_I2C_DELIVER 0x00
+#define NCT6694_I2C_DELIVER_SEL 0x00
+
+enum i2c_baudrate {
+ I2C_BR_25K = 0,
+ I2C_BR_50K,
+ I2C_BR_100K,
+ I2C_BR_200K,
+ I2C_BR_400K,
+ I2C_BR_800K,
+ I2C_BR_1M
+};
+
+struct __packed nct6694_i2c_deliver {
+ u8 port;
+ u8 br;
+ u8 addr;
+ u8 w_cnt;
+ u8 r_cnt;
+ u8 rsv[11];
+ u8 write_data[0x40];
+ u8 read_data[0x40];
+};
+
+struct nct6694_i2c_data {
+ struct nct6694 *nct6694;
+ struct i2c_adapter adapter;
+ struct nct6694_i2c_deliver *deliver;
+ unsigned char port;
+ unsigned char br;
+};
+
+static int nct6694_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct nct6694_i2c_data *data = adap->algo_data;
+ struct nct6694_i2c_deliver *deliver = data->deliver;
+ struct nct6694_cmd_header cmd_hd = {
+ .mod = NCT6694_I2C_MOD,
+ .cmd = NCT6694_I2C_DELIVER,
+ .sel = NCT6694_I2C_DELIVER_SEL,
+ .len = cpu_to_le16(sizeof(*deliver))
+ };
+ int ret, i;
+
+ for (i = 0; i < num ; i++) {
+ struct i2c_msg *msg_temp = &msgs[i];
+
+ memset(deliver, 0, sizeof(*deliver));
+
+ if (msg_temp->len > 64)
+ return -EPROTO;
+
+ deliver->port = data->port;
+ deliver->br = data->br;
+ deliver->addr = i2c_8bit_addr_from_msg(msg_temp);
+ if (msg_temp->flags & I2C_M_RD) {
+ deliver->r_cnt = msg_temp->len;
+ ret = nct6694_write_msg(data->nct6694, &cmd_hd, deliver);
+ if (ret < 0)
+ return ret;
+
+ memcpy(msg_temp->buf, deliver->read_data, msg_temp->len);
+ } else {
+ deliver->w_cnt = msg_temp->len;
+ memcpy(deliver->write_data, msg_temp->buf, msg_temp->len);
+ ret = nct6694_write_msg(data->nct6694, &cmd_hd, deliver);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ return num;
+}
+
+static u32 nct6694_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm algorithm = {
+ .master_xfer = nct6694_xfer,
+ .functionality = nct6694_func,
+};
+
+static int nct6694_i2c_probe(struct platform_device *pdev)
+{
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct nct6694 *nct6694 = dev_get_drvdata(pdev->dev.parent);
+ struct nct6694_i2c_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->deliver = devm_kzalloc(&pdev->dev, sizeof(struct nct6694_i2c_deliver),
+ GFP_KERNEL);
+ if (!data->deliver)
+ return -ENOMEM;
+
+ data->nct6694 = nct6694;
+ data->port = cell->id;
+ data->br = I2C_BR_100K;
+
+ sprintf(data->adapter.name, "NCT6694 I2C Adapter %d", cell->id);
+ data->adapter.owner = THIS_MODULE;
+ data->adapter.algo = &algorithm;
+ data->adapter.dev.parent = &pdev->dev;
+ data->adapter.algo_data = data;
+
+ platform_set_drvdata(pdev, data);
+
+ return i2c_add_adapter(&data->adapter);
+}
+
+static void nct6694_i2c_remove(struct platform_device *pdev)
+{
+ struct nct6694_i2c_data *data = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&data->adapter);
+}
+
+static struct platform_driver nct6694_i2c_driver = {
+ .driver = {
+ .name = "nct6694-i2c",
+ },
+ .probe = nct6694_i2c_probe,
+ .remove = nct6694_i2c_remove,
+};
+
+module_platform_driver(nct6694_i2c_driver);
+
+MODULE_DESCRIPTION("USB-I2C adapter driver for NCT6694");
+MODULE_AUTHOR("Ming Yu <tmyu0@nuvoton.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nct6694-i2c");
--
2.34.1
next prev parent reply other threads:[~2025-01-14 3:30 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-14 3:30 [PATCH v5 0/7] Add Nuvoton NCT6694 MFD drivers Ming Yu
2025-01-14 3:30 ` [PATCH v5 1/7] mfd: Add core driver for Nuvoton NCT6694 Ming Yu
2025-01-15 16:04 ` Lee Jones
2025-01-16 2:28 ` Ming Yu
2025-01-14 3:30 ` [PATCH v5 2/7] gpio: Add Nuvoton NCT6694 GPIO support Ming Yu
2025-01-14 12:12 ` Bartosz Golaszewski
2025-01-15 7:05 ` Ming Yu
2025-01-14 3:30 ` Ming Yu [this message]
2025-01-14 3:30 ` [PATCH v5 4/7] can: Add Nuvoton NCT6694 CAN support Ming Yu
2025-01-14 8:05 ` Vincent Mailhol
2025-01-14 10:46 ` Ming Yu
2025-01-14 15:11 ` Vincent Mailhol
2025-01-15 2:11 ` Ming Yu
2025-01-15 3:36 ` Vincent Mailhol
2025-01-15 5:35 ` Ming Yu
2025-01-15 6:43 ` Vincent Mailhol
2025-01-15 7:03 ` Ming Yu
2025-01-15 16:45 ` Vincent Mailhol
2025-01-16 6:34 ` Ming Yu
2025-01-16 11:23 ` Vincent Mailhol
2025-01-14 3:30 ` [PATCH v5 5/7] watchdog: Add Nuvoton NCT6694 WDT support Ming Yu
2025-01-14 3:30 ` [PATCH v5 6/7] hwmon: Add Nuvoton NCT6694 HWMON support Ming Yu
2025-01-14 3:30 ` [PATCH v5 7/7] rtc: Add Nuvoton NCT6694 RTC support Ming Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250114033010.2445925-4-a0282524688@gmail.com \
--to=a0282524688@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andi.shyti@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=brgl@bgdev.pl \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=jdelvare@suse.com \
--cc=kuba@kernel.org \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mailhol.vincent@wanadoo.fr \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=tmyu0@nuvoton.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.