[PATCH 7/9] wifi: mt76: mt7996: fix ldpc setting

[Shayne Chen <shayne.chen@mediatek.com>]

From: Peter Chiu <chui-hao.chiu@mediatek.com>

The non-AP interfaces would not use conf->vht_ldpc so they never set
STA_CAP_VHT_LDPC even if peer-station support LDPC.
Check conf->vht_ldpc only for AP interface.

Without this patch, station only uses BCC to transmit packet in VHT mode.

Fixes: dda423dd65c3 ("wifi: mt76: mt7996: remove mt7996_mcu_beacon_check_caps()")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/mcu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 9fb54388d975..9879c108cd0e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -2066,7 +2066,7 @@ mt7996_mcu_sta_rate_ctrl_tlv(struct sk_buff *skb, struct mt7996_dev *dev,
 			cap |= STA_CAP_VHT_TX_STBC;
 		if (sta->deflink.vht_cap.cap & IEEE80211_VHT_CAP_RXSTBC_1)
 			cap |= STA_CAP_VHT_RX_STBC;
-		if (vif->bss_conf.vht_ldpc &&
+		if ((vif->type != NL80211_IFTYPE_AP || vif->bss_conf.vht_ldpc) &&
 		    (sta->deflink.vht_cap.cap & IEEE80211_VHT_CAP_RXLDPC))
 			cap |= STA_CAP_VHT_LDPC;
 
-- 
2.39.2