From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: peterx@redhat.com, Juraj Marcin <jmarcin@redhat.com>,
Julia Suvorova <jusual@redhat.com>,
Prasad Pandit <ppandit@redhat.com>,
Fabiano Rosas <farosas@suse.de>
Subject: [PATCH 12/16] migration: Unwrap qemu_savevm_state_complete_precopy() in postcopy
Date: Tue, 14 Jan 2025 18:07:42 -0500 [thread overview]
Message-ID: <20250114230746.3268797-13-peterx@redhat.com> (raw)
In-Reply-To: <20250114230746.3268797-1-peterx@redhat.com>
Postcopy invokes qemu_savevm_state_complete_precopy() twice for a long
time, and that caused way too much confusions. Let's clean this up and
make postcopy easier to read.
It's actually fairly straightforward: postcopy starts with saving
non-postcopiable iterables, then later it saves again with non-iterable
only. Move these two calls out makes everything much easier to follow.
Otherwise it's very unclear what qemu_savevm_state_complete_precopy() did
in either of the calls.
No functional change intended.
Signed-off-by: Peter Xu <peterx@redhat.com>
---
migration/savevm.h | 1 +
migration/migration.c | 13 +++++++++++--
migration/savevm.c | 1 -
3 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/migration/savevm.h b/migration/savevm.h
index c48a53e95e..7957460062 100644
--- a/migration/savevm.h
+++ b/migration/savevm.h
@@ -44,6 +44,7 @@ void qemu_savevm_state_pending_exact(uint64_t *must_precopy,
uint64_t *can_postcopy);
void qemu_savevm_state_pending_estimate(uint64_t *must_precopy,
uint64_t *can_postcopy);
+int qemu_savevm_state_complete_precopy_iterable(QEMUFile *f, bool in_postcopy);
void qemu_savevm_send_ping(QEMUFile *f, uint32_t value);
void qemu_savevm_send_open_return_path(QEMUFile *f);
int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t *buf, size_t len);
diff --git a/migration/migration.c b/migration/migration.c
index 2c5674c2ae..a8fe423a2b 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -2566,7 +2566,11 @@ static int postcopy_start(MigrationState *ms, Error **errp)
* Cause any non-postcopiable, but iterative devices to
* send out their final data.
*/
- qemu_savevm_state_complete_precopy(ms->to_dst_file, true);
+ ret = qemu_savevm_state_complete_precopy_iterable(ms->to_dst_file, true);
+ if (ret) {
+ error_setg(errp, "Postcopy save non-postcopiable iterables failed");
+ goto fail;
+ }
/*
* in Finish migrate and with the io-lock held everything should
@@ -2605,7 +2609,12 @@ static int postcopy_start(MigrationState *ms, Error **errp)
*/
qemu_savevm_send_postcopy_listen(fb);
- qemu_savevm_state_complete_precopy(fb, false);
+ ret = qemu_savevm_state_complete_precopy_non_iterable(fb, true);
+ if (ret) {
+ error_setg(errp, "Postcopy save non-iterable device states failed");
+ goto fail_closefb;
+ }
+
if (migrate_postcopy_ram()) {
qemu_savevm_send_ping(fb, 3);
}
diff --git a/migration/savevm.c b/migration/savevm.c
index 9aef2fa3c9..0ddc4c8eb5 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1477,7 +1477,6 @@ void qemu_savevm_state_complete_postcopy(QEMUFile *f)
qemu_fflush(f);
}
-static
int qemu_savevm_state_complete_precopy_iterable(QEMUFile *f, bool in_postcopy)
{
int64_t start_ts_each, end_ts_each;
--
2.47.0
next prev parent reply other threads:[~2025-01-14 23:08 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-14 23:07 [PATCH 00/16] migration: Switchover phase refactoring Peter Xu
2025-01-14 23:07 ` [PATCH 01/16] migration: Remove postcopy implications in should_send_vmdesc() Peter Xu
2025-01-14 23:07 ` [PATCH 02/16] migration: Do not construct JSON description if suppressed Peter Xu
2025-01-14 23:07 ` [PATCH 03/16] migration: Optimize postcopy on downtime by avoiding JSON writer Peter Xu
2025-01-14 23:07 ` [PATCH 04/16] migration: Avoid two src-downtime-end tracepoints for postcopy Peter Xu
2025-01-14 23:07 ` [PATCH 05/16] migration: Drop inactivate_disk param in qemu_savevm_state_complete* Peter Xu
2025-01-14 23:07 ` [PATCH 06/16] migration: Synchronize all CPU states only for non-iterable dump Peter Xu
2025-01-14 23:07 ` [PATCH 07/16] migration: Adjust postcopy bandwidth during switchover Peter Xu
2025-01-14 23:07 ` [PATCH 08/16] migration: Adjust locking in migration_maybe_pause() Peter Xu
2025-01-14 23:07 ` [PATCH 09/16] migration: Drop cached migration state " Peter Xu
2025-01-14 23:07 ` [PATCH 10/16] migration: Take BQL slightly longer in postcopy_start() Peter Xu
2025-01-14 23:07 ` [PATCH 11/16] migration: Notify COMPLETE once for postcopy Peter Xu
2025-01-14 23:07 ` Peter Xu [this message]
2025-01-14 23:07 ` [PATCH 13/16] migration: Cleanup qemu_savevm_state_complete_precopy() Peter Xu
2025-01-14 23:07 ` [PATCH 14/16] migration: Always set DEVICE state Peter Xu
2025-01-14 23:07 ` [PATCH 15/16] migration: Merge precopy/postcopy on switchover start Peter Xu
2025-01-14 23:07 ` [PATCH 16/16] migration: Trivial cleanup on JSON writer of vmstate_save() Peter Xu
2025-01-15 9:12 ` [PATCH 00/16] migration: Switchover phase refactoring Jiri Denemark
2025-01-15 12:55 ` Peter Xu
2025-01-15 16:13 ` Juraj Marcin
2025-01-15 16:49 ` Fabiano Rosas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250114230746.3268797-13-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=farosas@suse.de \
--cc=jmarcin@redhat.com \
--cc=jusual@redhat.com \
--cc=ppandit@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.