Re: [Buildroot] [PATCH v3 1/4] boot/xilinx-embeddedsw: new boot package

[Luca Ceresoli via buildroot <buildroot@buildroot.org>]

On Tue, 21 Jan 2025 10:22:19 +0000
Neal Frager <neal.frager@amd.com> wrote:

> This patch adds a new boot package to Buildroot for building boot firmware
> applications from the https://github.com/Xilinx/embeddedsw repo.
> 
> If a user chooses to build a boot firmware application, it will not be
> installed by the xilinx-prebuilt package since it will come from the
> xilinx-embeddedsw package.  In this way, users can mix and match applications
> to be built by the xilinx-embeddedsw package and applications to be copied
> from the xilinx-prebuilt package.  This is necessary for the versal platform
> because the pdi file can only be built by AMD Vivado.
> 
> Support for additional applications in the https://github.com/Xilinx/embeddedsw
> repo can always be added to this package as needed or requested.
> 
> The xilinx-embeddedsw package replaces previous solutions including
> zynqmp-firmware, versal-firmware and xilinx-source.
> 
> Signed-off-by: Neal Frager <neal.frager@amd.com>

[Tested on Kria KV260 starter kit]
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot