From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Lorenzo Bianconi" <lorenzo@kernel.org>,
"Hui Ma" <hui.ma@airoha.com>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Sasha Levin" <sashal@kernel.org>,
ryder.lee@mediatek.com, jianjun.wang@mediatek.com,
lpieralisi@kernel.org, kw@linux.com, bhelgaas@google.com,
matthias.bgg@gmail.com, angelogioacchino.delregno@collabora.com,
linux-pci@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 6.13 12/15] PCI: mediatek-gen3: Avoid PCIe resetting via PERST# for Airoha EN7581 SoC
Date: Tue, 28 Jan 2025 12:53:43 -0500 [thread overview]
Message-ID: <20250128175346.1197097-12-sashal@kernel.org> (raw)
In-Reply-To: <20250128175346.1197097-1-sashal@kernel.org>
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 491cb9c5084790aafa02e843349492c284373231 ]
Airoha EN7581 has a hw bug asserting/releasing PERST# signal causing
occasional PCIe link down issues. In order to overcome the problem,
PERST# signal is not asserted/released during device probe or
suspend/resume phase and the PCIe block is reset using
en7523_reset_assert() and en7581_pci_enable().
Introduce flags field in the mtk_gen3_pcie_pdata struct in order to
specify per-SoC capabilities.
Link: https://lore.kernel.org/r/20250109-pcie-en7581-rst-fix-v4-1-4a45c89fb143@kernel.org
Tested-by: Hui Ma <hui.ma@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/controller/pcie-mediatek-gen3.c | 59 ++++++++++++++-------
1 file changed, 41 insertions(+), 18 deletions(-)
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index be52e3a123abd..74dfef8ce9ec1 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -133,10 +133,18 @@ struct mtk_gen3_pcie;
#define PCIE_CONF_LINK2_CTL_STS (PCIE_CFG_OFFSET_ADDR + 0xb0)
#define PCIE_CONF_LINK2_LCR2_LINK_SPEED GENMASK(3, 0)
+enum mtk_gen3_pcie_flags {
+ SKIP_PCIE_RSTB = BIT(0), /* Skip PERST# assertion during device
+ * probing or suspend/resume phase to
+ * avoid hw bugs/issues.
+ */
+};
+
/**
* struct mtk_gen3_pcie_pdata - differentiate between host generations
* @power_up: pcie power_up callback
* @phy_resets: phy reset lines SoC data.
+ * @flags: pcie device flags.
*/
struct mtk_gen3_pcie_pdata {
int (*power_up)(struct mtk_gen3_pcie *pcie);
@@ -144,6 +152,7 @@ struct mtk_gen3_pcie_pdata {
const char *id[MAX_NUM_PHY_RESETS];
int num_resets;
} phy_resets;
+ u32 flags;
};
/**
@@ -438,22 +447,33 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie)
val |= PCIE_DISABLE_DVFSRC_VLT_REQ;
writel_relaxed(val, pcie->base + PCIE_MISC_CTRL_REG);
- /* Assert all reset signals */
- val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG);
- val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB;
- writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
-
/*
- * Described in PCIe CEM specification sections 2.2 (PERST# Signal)
- * and 2.2.1 (Initial Power-Up (G3 to S0)).
- * The deassertion of PERST# should be delayed 100ms (TPVPERL)
- * for the power and clock to become stable.
+ * Airoha EN7581 has a hw bug asserting/releasing PCIE_PE_RSTB signal
+ * causing occasional PCIe link down. In order to overcome the issue,
+ * PCIE_RSTB signals are not asserted/released at this stage and the
+ * PCIe block is reset using en7523_reset_assert() and
+ * en7581_pci_enable().
*/
- msleep(100);
-
- /* De-assert reset signals */
- val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB);
- writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
+ if (!(pcie->soc->flags & SKIP_PCIE_RSTB)) {
+ /* Assert all reset signals */
+ val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG);
+ val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB |
+ PCIE_PE_RSTB;
+ writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
+
+ /*
+ * Described in PCIe CEM specification revision 6.0.
+ *
+ * The deassertion of PERST# should be delayed 100ms (TPVPERL)
+ * for the power and clock to become stable.
+ */
+ msleep(PCIE_T_PVPERL_MS);
+
+ /* De-assert reset signals */
+ val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB |
+ PCIE_PE_RSTB);
+ writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
+ }
/* Check if the link is up or not */
err = readl_poll_timeout(pcie->base + PCIE_LINK_STATUS_REG, val,
@@ -1231,10 +1251,12 @@ static int mtk_pcie_suspend_noirq(struct device *dev)
return err;
}
- /* Pull down the PERST# pin */
- val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG);
- val |= PCIE_PE_RSTB;
- writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
+ if (!(pcie->soc->flags & SKIP_PCIE_RSTB)) {
+ /* Assert the PERST# pin */
+ val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG);
+ val |= PCIE_PE_RSTB;
+ writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
+ }
dev_dbg(pcie->dev, "entered L2 states successfully");
@@ -1285,6 +1307,7 @@ static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_en7581 = {
.id[2] = "phy-lane2",
.num_resets = 3,
},
+ .flags = SKIP_PCIE_RSTB,
};
static const struct of_device_id mtk_pcie_of_match[] = {
--
2.39.5
next prev parent reply other threads:[~2025-01-28 17:56 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-28 17:53 [PATCH AUTOSEL 6.13 01/15] media: cxd2841er: fix 64-bit division on gcc-9 Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 02/15] PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar() Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 03/15] media: i2c: ds90ub913: Add error handling to ub913_hw_init() Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 04/15] media: i2c: ds90ub953: Add error handling for i2c reads/writes Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 05/15] media: bcm2835-unicam: Disable trigger mode operation Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 06/15] media: uvcvideo: Implement dual stream quirk to fix loss of usb packets Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 07/15] media: uvcvideo: Add new quirk definition for the Sonix Technology Co. 292a camera Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 08/15] media: uvcvideo: Add Kurokesu C1 PRO camera Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 09/15] media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 10/15] Drivers: hv: vmbus: Wait for boot-time offers during boot and resume Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 11/15] hyperv: Do not overlap the hvcall IO areas in hv_vtl_apicid_to_vp_id() Sasha Levin
2025-01-28 21:15 ` Roman Kisel
2025-01-28 17:53 ` Sasha Levin [this message]
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 13/15] PCI: Store number of supported End-End TLP Prefixes Sasha Levin
2025-01-28 18:00 ` Ilpo Järvinen
2025-01-28 18:11 ` Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 14/15] PCI/DPC: Quirk PIO log size for Intel Raptor Lake-P Sasha Levin
2025-01-28 17:53 ` [PATCH AUTOSEL 6.13 15/15] PCI: switchtec: Add Microchip PCI100X device IDs Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250128175346.1197097-12-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bhelgaas@google.com \
--cc=hui.ma@airoha.com \
--cc=jianjun.wang@mediatek.com \
--cc=kw@linux.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=lpieralisi@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=ryder.lee@mediatek.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.