From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-cve-announce@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: CVE-2025-21682: eth: bnxt: always recalculate features after XDP clearing, fix null-deref
Date: Fri, 31 Jan 2025 12:31:14 +0100 [thread overview]
Message-ID: <2025013103-CVE-2025-21682-ccfd@gregkh> (raw)
Description
===========
In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: always recalculate features after XDP clearing, fix null-deref
Recalculate features when XDP is detached.
Before:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: off [requested on]
After:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: on
The fact that HW-GRO doesn't get re-enabled automatically is just
a minor annoyance. The real issue is that the features will randomly
come back during another reconfiguration which just happens to invoke
netdev_update_features(). The driver doesn't handle reconfiguring
two things at a time very robustly.
Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") we only reconfigure the RSS hash table
if the "effective" number of Rx rings has changed. If HW-GRO is
enabled "effective" number of rings is 2x what user sees.
So if we are in the bad state, with HW-GRO re-enablement "pending"
after XDP off, and we lower the rings by / 2 - the HW-GRO rings
doing 2x and the ethtool -L doing / 2 may cancel each other out,
and the:
if (old_rx_rings != bp->hw_resc.resv_rx_rings &&
condition in __bnxt_reserve_rings() will be false.
The RSS map won't get updated, and we'll crash with:
BUG: kernel NULL pointer dereference, address: 0000000000000168
RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0
bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180
__bnxt_setup_vnic_p5+0x58/0x110
bnxt_init_nic+0xb72/0xf50
__bnxt_open_nic+0x40d/0xab0
bnxt_open_nic+0x2b/0x60
ethtool_set_channels+0x18c/0x1d0
As we try to access a freed ring.
The issue is present since XDP support was added, really, but
prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") it wasn't causing major issues.
The Linux kernel CVE team has assigned CVE-2025-21682 to this issue.
Affected and fixed versions
===========================
Issue introduced in 4.16 with commit 1054aee82321483dceabbb9b9e5d6512e8fe684b and fixed in 6.12.11 with commit 08831a894d18abfaabb5bbde7c2069a7fb41dd93
Issue introduced in 4.16 with commit 1054aee82321483dceabbb9b9e5d6512e8fe684b and fixed in 6.13 with commit f0aa6a37a3dbb40b272df5fc6db93c114688adcd
Please see https://www.kernel.org for a full list of currently supported
kernel versions by the kernel community.
Unaffected versions might change over time as fixes are backported to
older supported kernel versions. The official CVE entry at
https://cve.org/CVERecord/?id=CVE-2025-21682
will be updated if fixes are backported, please check that for the most
up to date information about this issue.
Affected files
==============
The file(s) affected by this issue are:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
drivers/net/ethernet/broadcom/bnxt/bnxt.h
drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
Mitigation
==========
The Linux kernel CVE team recommends that you update to the latest
stable kernel version for this, and many other bugfixes. Individual
changes are never tested alone, but rather are part of a larger kernel
release. Cherry-picking individual commits is not recommended or
supported by the Linux kernel community at all. If however, updating to
the latest release is impossible, the individual changes to resolve this
issue can be found at these commits:
https://git.kernel.org/stable/c/08831a894d18abfaabb5bbde7c2069a7fb41dd93
https://git.kernel.org/stable/c/f0aa6a37a3dbb40b272df5fc6db93c114688adcd
reply other threads:[~2025-01-31 11:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025013103-CVE-2025-21682-ccfd@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=cve@kernel.org \
--cc=linux-cve-announce@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.