Re: [PATCH v3 4/7] mfd: bcm590xx: Add compatible for BCM59054

[Lee Jones <lee@kernel.org>]

On Fri, 31 Jan 2025, Artur Weber wrote:

> The BCM59056 supported by the bcm590xx driver is similar to the
> BCM59054 MFD. Add a compatible for it in the driver, in preparation
> for extending support of this chip in the bcm590xx regulator driver.
> 
> Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
> ---
> Changes in v3:
> - Fix compilation warning about device_type pointer cast type
> - Name the device types enum and use it as the type in the MFD struct
> ---
>  drivers/mfd/bcm590xx.c       | 6 +++++-
>  include/linux/mfd/bcm590xx.h | 7 +++++++
>  2 files changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c
> index 8b56786d85d0182acf91da203b5f943556c08422..23036157480e0116301bfa93932c92f5a80010ea 100644
> --- a/drivers/mfd/bcm590xx.c
> +++ b/drivers/mfd/bcm590xx.c
> @@ -50,6 +50,9 @@ static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri)
>  	bcm590xx->dev = &i2c_pri->dev;
>  	bcm590xx->i2c_pri = i2c_pri;
>  
> +	bcm590xx->device_type = \
> +			  (uintptr_t) of_device_get_match_data(bcm590xx->dev);

Why are you dividing pointers with each other?

>  	bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri,
>  						 &bcm590xx_regmap_config_pri);
>  	if (IS_ERR(bcm590xx->regmap_pri)) {
> @@ -91,7 +94,8 @@ static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri)
>  }
>  
>  static const struct of_device_id bcm590xx_of_match[] = {
> -	{ .compatible = "brcm,bcm59056" },
> +	{ .compatible = "brcm,bcm59054", .data = (void *)BCM59054_TYPE },
> +	{ .compatible = "brcm,bcm59056", .data = (void *)BCM59056_TYPE },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, bcm590xx_of_match);
> diff --git a/include/linux/mfd/bcm590xx.h b/include/linux/mfd/bcm590xx.h
> index 6b8791da6119b22514447bf1572238b71c8b0e97..b76fb57bf0dd17d51580e93db58ece4a4d6dc5e4 100644
> --- a/include/linux/mfd/bcm590xx.h
> +++ b/include/linux/mfd/bcm590xx.h
> @@ -13,12 +13,19 @@
>  #include <linux/i2c.h>
>  #include <linux/regmap.h>
>  
> +/* device types */
> +enum bcm590xx_device_type {
> +	BCM59054_TYPE,
> +	BCM59056_TYPE,
> +};
> +
>  /* max register address */
>  #define BCM590XX_MAX_REGISTER_PRI	0xe7
>  #define BCM590XX_MAX_REGISTER_SEC	0xf0
>  
>  struct bcm590xx {
>  	struct device *dev;
> +	enum bcm590xx_device_type device_type;
>  	struct i2c_client *i2c_pri;
>  	struct i2c_client *i2c_sec;
>  	struct regmap *regmap_pri;
> 
> -- 
> 2.48.1
> 

-- 
Lee Jones [李琼斯]