From: Sebastian Ott <sebott@redhat.com>
To: Marc Zyngier <maz@kernel.org>,
Oliver Upton <oliver.upton@linux.dev>,
Joey Gouly <joey.gouly@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: Cornelia Huck <cohuck@redhat.com>,
Eric Auger <eric.auger@redhat.com>,
linux-arm-kernel@lists.infradead.org, kvmarm@lists.linux.dev,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] KVM: arm64: Allow userspace to change MIDR_EL1
Date: Mon, 10 Feb 2025 16:49:50 +0100 [thread overview]
Message-ID: <20250210154953.27002-2-sebott@redhat.com> (raw)
In-Reply-To: <20250210154953.27002-1-sebott@redhat.com>
Enable VMMs to write MIDR_EL1 by treating it as a VM ID register.
Since MIDR_EL1 is not handled as a proper arm64_ftr_reg apply only
a sanity check against the writable mask to ensure the reserved
bits are 0.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
---
arch/arm64/include/asm/kvm_host.h | 3 +++
arch/arm64/kvm/sys_regs.c | 37 +++++++++++++++++++++++++++----
2 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 7cfa024de4e3..3db8c773339e 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -373,6 +373,7 @@ struct kvm_arch {
#define KVM_ARM_ID_REG_NUM (IDREG_IDX(sys_reg(3, 0, 0, 7, 7)) + 1)
u64 id_regs[KVM_ARM_ID_REG_NUM];
+ u64 midr_el1;
u64 ctr_el0;
/* Masks for VNCR-backed and general EL2 sysregs */
@@ -1469,6 +1470,8 @@ static inline u64 *__vm_id_reg(struct kvm_arch *ka, u32 reg)
switch (reg) {
case sys_reg(3, 0, 0, 1, 0) ... sys_reg(3, 0, 0, 7, 7):
return &ka->id_regs[IDREG_IDX(reg)];
+ case SYS_MIDR_EL1:
+ return &ka->midr_el1;
case SYS_CTR_EL0:
return &ka->ctr_el0;
default:
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 82430c1e1dd0..cc94bed7299d 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1666,7 +1666,7 @@ static bool is_feature_id_reg(u32 encoding)
*/
static inline bool is_vm_ftr_id_reg(u32 id)
{
- if (id == SYS_CTR_EL0)
+ if (id == SYS_CTR_EL0 || id == SYS_MIDR_EL1)
return true;
return (sys_reg_Op0(id) == 3 && sys_reg_Op1(id) == 0 &&
@@ -1999,6 +1999,22 @@ static int get_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
return 0;
}
+static bool skip_feature_check(u32 reg)
+{
+ return (reg == SYS_MIDR_EL1);
+}
+
+/*
+ * For non ftr regs do a limited test against the writable mask only.
+ */
+static int arm64_check_mask(const struct sys_reg_desc *rd, u64 val)
+{
+ if ((rd->val & val) != val)
+ return -EINVAL;
+
+ return 0;
+}
+
static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
u64 val)
{
@@ -2021,7 +2037,11 @@ static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
return ret;
}
- ret = arm64_check_features(vcpu, rd, val);
+ if (skip_feature_check(id))
+ ret = arm64_check_mask(rd, val);
+ else
+ ret = arm64_check_features(vcpu, rd, val);
+
if (!ret)
kvm_set_vm_id_reg(vcpu->kvm, id, val);
@@ -2493,6 +2513,15 @@ static bool access_mdcr(struct kvm_vcpu *vcpu,
return true;
}
+#define FUNCTION_RESET(reg) \
+ static u64 reset_##reg(struct kvm_vcpu *v, \
+ const struct sys_reg_desc *r) \
+ { \
+ return read_sysreg(reg); \
+ }
+
+FUNCTION_RESET(midr_el1)
+
/*
* Architected system registers.
@@ -2542,6 +2571,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
{ SYS_DESC(SYS_DBGVCR32_EL2), undef_access, reset_val, DBGVCR32_EL2, 0 },
+ { ID_DESC(MIDR_EL1), .set_user = set_id_reg, .visibility = id_visibility,
+ .reset = reset_midr_el1, .val = (u32)-1 },
{ SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 },
/*
@@ -4594,13 +4625,11 @@ id_to_sys_reg_desc(struct kvm_vcpu *vcpu, u64 id,
return ((struct sys_reg_desc *)r)->val; \
}
-FUNCTION_INVARIANT(midr_el1)
FUNCTION_INVARIANT(revidr_el1)
FUNCTION_INVARIANT(aidr_el1)
/* ->val is filled in by kvm_sys_reg_table_init() */
static struct sys_reg_desc invariant_sys_regs[] __ro_after_init = {
- { SYS_DESC(SYS_MIDR_EL1), NULL, reset_midr_el1 },
{ SYS_DESC(SYS_REVIDR_EL1), NULL, reset_revidr_el1 },
{ SYS_DESC(SYS_AIDR_EL1), NULL, reset_aidr_el1 },
};
--
2.42.0
next prev parent reply other threads:[~2025-02-10 15:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-10 15:49 [PATCH 0/4] KVM: arm64: writable MIDR/REVIDR Sebastian Ott
2025-02-10 15:49 ` Sebastian Ott [this message]
2025-02-10 18:12 ` [PATCH 1/4] KVM: arm64: Allow userspace to change MIDR_EL1 Oliver Upton
2025-02-11 12:43 ` Sebastian Ott
2025-02-10 15:49 ` [PATCH 2/4] KVM: arm64: Allow userspace to change REVIDR_EL1 Sebastian Ott
2025-02-10 15:49 ` [PATCH 3/4] KVM: arm64: Allow userspace to change AIDR_EL1 Sebastian Ott
2025-02-10 15:49 ` [PATCH 4/4] KVM: arm64: trap guest access for REVIDR_EL1 and AIDR_EL1 Sebastian Ott
2025-02-10 18:16 ` [PATCH 0/4] KVM: arm64: writable MIDR/REVIDR Oliver Upton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250210154953.27002-2-sebott@redhat.com \
--to=sebott@redhat.com \
--cc=catalin.marinas@arm.com \
--cc=cohuck@redhat.com \
--cc=eric.auger@redhat.com \
--cc=joey.gouly@arm.com \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=oliver.upton@linux.dev \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.